STUOGYUM DC103

Contents

STUOGYUM DC103 4K Digital Camera User Manual

Model: DC103

1. Introduction

This manual provides detailed instructions for operating your STUOGYUM DC103 4K Digital Camera. Featuring a 64MP sensor, 4K UHD video recording, 16X digital zoom, and a 180° flip screen, this camera is designed for high-quality photography and vlogging. Please read this manual thoroughly to ensure proper use and maintenance of your device.

STUOGYUM DC103 4K Digital Camera with 180 degree flip screen

Figure 1: STUOGYUM DC103 4K Digital Camera

2. Important Safety Warnings

WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

Battery Cautions:

  • Do not disassemble.
  • Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping, or stepping on it.
  • Do not short-circuit and do not allow metal objects to come into contact with the battery terminals.
  • Do not expose to high temperatures above 60°C (140°F) such as in direct sunlight or in a car parked in the sun.
  • Do not incinerate or dispose of in a fire.
  • Do not handle damaged or leaking lithium ion batteries.
  • Be sure to charge the battery pack using a genuine battery charger or a device that can charge the battery pack.
  • Keep the battery pack out of the reach of small children.
  • Keep the battery pack dry.
  • Replace only with the same or equivalent type recommended by the seller.
  • Dispose of used battery packs promptly as described in the instructions.

3. Identifying Parts

Familiarize yourself with the different parts of your camera using the diagrams and descriptions below.

Diagram showing the dimensions of the DC103 camera

Figure 2: Camera Dimensions (12.4cm x 8cm x 6.2cm)

Part Names and Functions:

  1. ON/OFF (Power) switch button
  2. Shutter button
  3. Mode dial
  4. Zoom lever (Zoom out/Zoom in) buttons
  5. Speaker holes
  6. Tripod socket hole
  7. Battery cover
  8. Screen display button
  9. Indicator light
  10. Recording shortcut button
  11. OK button
  12. Up button (Flash mode switch), Down button (Delete), Left button (Fixed time), Right button (Continuous shooting)
  13. Playback button
  14. MENU button
  15. 180° Flip screen
  16. Memory card slot
  17. USB (Type-C) ports
  18. LED lamp
  19. Strap lug
  20. Built-in microphone ports

4. Setup

4.1. Installing and Removing the Battery

  1. Push the battery cover latch, then open the battery cover.
  2. Open the battery cover. Then insert the battery as illustrated, and press until it clicks into the locked position.
  3. Push the battery lock lever and the battery eject automatically. Close the battery cover.
Diagram showing battery and SD card installation

Figure 3: Battery and Memory Card Installation

4.2. Charging the Camera

1. Please use a USB (Type-C) cable and a 5V charger to charge in case of mismatching.

2. Charge Indicator:

  • Lit (Red Indicator): Charging in progress
  • Off: Charging complete
  • Flashing (Red Indicator): The camera is out of power, or the battery is anti-installed.

Note: For the first-time use, please ensure the camera is fully charged before operation.

Diagram showing USB Type-C charging port and indicator light

Figure 4: Charging the Camera via USB-C

4.3. Installing and Removing the Micro SD Card

1. After opening the dust cover, insert the Micro SD card as shown in the figure, and continue pressing it down until the memory card is locked.

2. To remove the memory card: Gently press the memory card, then slowly release it. The memory card will pop out, allowing you to take it out.

Note:

  • Before installing or removing the memory card, please turn off the camera first.
  • Insert the card in the correct orientation. Do not apply excessive force when inserting to avoid damaging the memory card or camera components. If the memory card cannot be inserted, check if the orientation is correct.
  • For new memory cards or memory cards formatted on other devices, please format them in this camera before use.
  • The camera supports 4-256GB Micro SD cards.
  • Class 10 is recommended, we do not recommend using U3 level card.

4.4. Formatting the Micro SD Card

1. Turn the mode dial to System Settings mode.

2. Select the "Format" option.

3. Select "Yes" and confirm formatting.

Note:

  • Do not accidentally select the memory card formatting option during use.
  • Once the memory card has been formatted once, you do not need to format it again. (The first formatting is only to match the camera settings.)
  • It is recommended that you regularly back up your photos to your computer.
  • If you want to reformat the memory card, it is advisable to first back up your photos and videos on your computer, as reformatting will erase all data on the memory card, including photos, videos, documents, etc. Once formatted, this data will be irretrievable.

5. Operating Instructions

5.1. Mode Dial

You can easily switch between different modes to suit your needs by turning the mode dial. Modes available include: Still Images, Video Recording, Slow Motion, System Settings, Effects, Night, Scenery, Portrait.

Diagram of camera mode dial with various shooting modes

Figure 5: Camera Mode Dial and Creative Shooting Modes

  • Shooting Still Images: In Still Images mode, press the shutter button to capture an image.
  • Video Recording: In Video Recording mode, press the shutter button to start/stop recording.
  • Slow Motion: In Slow Motion recording mode, press the shutter button to start recording. Note that for time-lapse recording, moving objects may leave a moving image on the video when exposed. Shooting at a higher-than-normal speed produces a longer movie that reflects slower motion than it does.
  • System Settings: Access System Settings mode to customize camera settings such as language, date and time, auto power off, sound, light frequency, format, and factory settings.
  • Effects: Choose from a variety of effects for shooting, including Normal, Black and White, Sepia, Red, Green, Blue, Sunset, Warm Color, Cold Color, Over Exposure, IR, Binary, Vivid, Undertone, Dog Eye, Aibao, Gothic, Japan Style, LOMO, Negative, etc.
  • Night: In Night mode, the camera can compensate for the loss of quality in darkness or low light to take high-definition quality images.
  • Scenery: Scenery mode allows you to capture an entire range of scenery with sharp focus and vivid colors for clear and detailed images.
  • Portrait: Portrait Mode creates vivid images by focusing on the human figure to clearly express portrait features.

5.2. Shooting Still Images with Autofocus Function

1. Turn the mode dial to still image mode.

2. Press the shutter button halfway down to focus. When the image is in focus, the focus screen turns yellow to green.

3. Press the shutter button fully down to shoot an image.

Demonstration of 64MP autofocus and 16x digital zoom

Figure 6: Autofocus and 16X Digital Zoom in action

5.3. Shooting Videos

Method 1 (Using Mode Dial):

1. Rotate the mode dial to the photography mode.

2. Press the shutter button to start/end video recording; press the OK button to pause/resume recording.

Method 2 (Using Shortcut Key):

1. Press the photography shortcut key to start/end video recording; press the OK button to pause/resume recording.

Video 1: DC103 Retro Digital Camera Unboxing and Features (includes video recording demo)

5.4. Flash Settings

The camera flash is set to off mode by default. Press the Flash mode switch button to switch the flash mode.

  • Turn off flash: No flash is used when taking photos under any circumstances.
  • Auto flash: In low light conditions, the built-in flash automatically activates when taking photos.
  • Forced flash: The built-in flash is always activated for flash photography, regardless of lighting conditions.
  • Turn on the fill light: The LED light remains on to provide continuous fill light.
Camera screen showing 3 inch IPS display and built-in flash icon

Figure 7: 3-inch IPS Screen and Built-in Flash

5.5. Special Effect Props

1. In Photo Mode, briefly press the OK button to activate the Special Effect Props mode.

2. Use the left/right buttons to select the previous/next special effect, then briefly press the OK button to confirm the selected effect.

3. Half-pressing the shutter button locks the prop, enabling stable composition for special effect photography.

4. Fully press the shutter button to capture a Special Effect photo.

5. To exit the Special Effect Props mode, press the down button once, then press the OK button again.

Note: The Special Effect Props mode's face detection feature only supports detecting and marking a single face. Accurate recognition and effect application are guaranteed when shooting solo.

5.6. Viewing Images and Videos

1. Turn to still image or video recording mode.

2. Press the (Playback) button. Select the next/previous image/video through the left and right buttons.

3. To delete an image/video, press the Delete button. Confirm by selecting "Yes".

4. Press the (Playback) button again to return to shooting mode.

5.7. 180° Flip Screen Functionality

1. Flip the screen upward by 180° to enable front-facing screen preview, allowing real-time adjustment of expressions and composition.

2. After using the screen, flip it downward by 180° to retract it.

Camera with 180 degree flip screen for selfies

Figure 8: 180° Flip Screen for Selfies and Vlogging

5.8. Webcam Functionality

1. Use the USB (Type-C) data cable (included in the package) to connect the computer, when the camera is on.

2. Once completely connected, a pop-up dialog box will appear on the camera screen.

3. Select "PC camera" on the screen, and use the camera as a webcam on your computer.

4. When finished, unplug the data cable, and the camera will exit the webcam camera mode.

Diagram showing camera connected to laptop for webcam use and data transfer

Figure 9: Webcam Functionality and USB Connection

5.9. Wi-Fi Connectivity

Connect the phone to the camera's Wi-Fi:

1. After the camera is powered on, open the Wi-Fi in the camera's system settings or long-press the camera's menu button to enable the camera's Wi-Fi mode. The camera's Wi-Fi signal source will be activated simultaneously. Camera Wi-Fi name (SSID): XXXXXX-XX-XXXXXX; Wi-Fi password (Password): XXXXXX.

2. Open the Wi-Fi settings on your phone, locate the camera's Wi-Fi name, tap it, enter the camera's Wi-Fi password, and connect to the camera's Wi-Fi.

Install the App:

1. For Android phone users: Search for "Viipulse" in the app store or third-party browsers to install the App. Alternatively, scan the provided QR code with your phone to install the App.

2. For iPhone users: Search for "Viipulse" in the App Store to install the App.

Using the App:

1. After successfully connecting your phone to the camera's Wi-Fi, open the "Viipulse" app on your phone. The app will automatically connect to the camera's Wi-Fi. The app can remotely control the camera to take photos and record videos. Additionally, you can use the app to browse the camera's photos and videos, and download files from the camera to your mobile phone or tablet for sharing.

Exit Camera Wi-Fi:

Disabling Camera Wi-Fi: Press the camera menu button to exit the camera's Wi-Fi mode, which will disconnect the connection between the camera and the phone app.

5.10. Downloading Still Image/Video Files to the Computer

1. Use the USB (Type-C) data cable (included in the package) to connect the computer, when the camera is on.

2. Once completely connected, a pop-up dialog box will appear on the camera screen.

3. Choose MSDC on the screen, and download the files from the camera to your computer.

4. When download is completed, unplug the data cable, and the camera will exit MSDC mode.

6. Product Specifications

FeatureSpecification
Image Resolution64M (9200x6900); 48M (8000x6000); 44M (7600x5800); 36M (7936x4480 HD); 24M (5600x4200); 20M (5200x3900); 16M (4608x3456); 12M (4000x3000); 10M (3648x2736); 7M-Wide (3648x2048 HD); 5M (2592x1944); 3M (2048x1536); 2M-Wide (1920x1080 HD)
Video Resolution4K ULTRA HD; 2.7K; FULL HD; HD; VGA
Memory cardSupport Micro SD card (Recommend 4GB to 256GB Class SDHC 6)
File formatStill image (JPG compliant), Video (AVI format)
Monitor3.0-inch IPS Screen
Digital zoom16X
Focal lengthf=3.37mm
ApertureF/2.2
USB portType-C
Inputs5V= 1A
BatteryRechargeable Lithium-ion Polymer Battery
Operating system requirementsWindows 7/ Windows 8/ Windows 10/ Windows 11
Product size124 × 80 × 62 mm

7. Troubleshooting (Frequently Asked Questions)

Q: The camera can't turn on after installing the batteries.
A: No remaining battery with the camera. The battery is in the unbroken package. Upside-down or inadequate installation of the battery.
Q: Cannot take still images and video after pressing the shutter button.
A: The built-in memory is full. No memory card installed.
Q: Images/ Video is blurry.
A: Hands shake when taking images. Use both hands to stabilize the camera, or use other objects (tripod) to stabilize, and do not shake the camera when taking images. The resulting images or videos are dim. The shooting environment is not well-lit. Shoot in a well-lit place, or use flash mode to improve.
Q: The camera automatically shuts down.
A: The remaining battery is low. Please fully charge the battery before use. To save power, the camera will automatically turn off according to the setting if there is no operation for more than 1 minute (3 minutes or 5 minutes, depending on the setting).
Q: Can't delete files in the camera.
A: The file protection function in the camera menu is enabled, turn off this function in the menu.
Q: The camera freezes or the screen is blurry.
A: Incorrect format of the memory card. Format the Micro SD Card before initial use.

8. User Tips

  • Always ensure your Micro SD card is formatted within the camera before its first use or after using it in another device to prevent data corruption and ensure optimal performance.
  • Regularly back up your photos and videos to a computer to avoid accidental data loss, especially before reformatting your memory card.
  • When shooting in low light, utilize the built-in flash or fill light mode to improve image clarity and brightness.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the product's official website or contact the retailer where you purchased the camera. Keep your proof of purchase for any warranty claims.

10. FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

STUOGYUM DC103 Digital Camera User Manual | No.DC103W/DC103 250820

All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.