SHINEKNOT Tuya Smart Home Wifi Wall Touch Dimmable Switch User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SHINEKNOT Tuya Smart Home Wifi Wall Touch Dimmable Switch. This smart switch allows you to control your lighting remotely via a mobile application, voice commands, or direct touch. It supports dimming functionality for compatible lamps and integrates seamlessly with popular smart home ecosystems.

Important Note: This switch requires a neutral line for proper operation. Please confirm your house wiring includes a neutral line before purchase and installation.

2. Safety Information

• Installation must be performed by a professional electrician.
• Ensure the power supply is completely turned off at the circuit breaker before any installation or maintenance.
• Do not install the switch with power charged.
• Install the switch in an open, dry, and barrier-free location to achieve the best control effect. Avoid damp places.
• This device is suitable for altitudes up to 2000 meters and non-tropical climates.
• A 10A Type C circuit breaker (according to IEC 60898-1) shall be installed in the fixed wiring for protection for each output and supply of the switch.
• The device must be connected to both the neutral line (N) and live line (L) to function normally.

3. Product Overview

The SHINEKNOT Smart Dimmable Switch features a crystal tempered glass panel with touch-sensitive buttons for intuitive control. It supports Wi-Fi connectivity for remote management and voice control integration.

Key Features:

• Dimming Functionality: Adjust brightness (0-100%) for compatible lamps. Note: This switch only adjusts brightness and does not support color adjustment.
• Wi-Fi Direct Connection: No additional gateway required.
• Remote Control: Control your lights from anywhere using the mobile app (3G/4G/Wi-Fi).
• Tempered Glass Panel: Durable, scratch-resistant, and highly sensitive touch interface.
• Nighttime LED Backlight: Provides visibility in the dark.
• Real-time Status Display: Monitor light status via the app.
• Timer/Scene Control: Schedule lighting and create custom scenes.
• Family Sharing: Share control with multiple users.
• Voice Control: Compatible with Amazon Alexa, Google Home, and Tmall Genie.

4. Specifications

5. Setup & Installation

Before proceeding, ensure you have read and understood the safety information in Section 2. Turn off the main power at your circuit breaker before starting installation.

5.1. EU Standard Installation

1. Remove the Panel: Carefully remove the front glass panel of the switch using a screwdriver.
2. Prepare Wiring:
   • Connect the Live (L) wire to the 'L' terminal on the switch.
   • Connect the Neutral (N) wire to the 'N' terminal on the switch.
   • Connect the bulb's load wire(s) to the 'L1', 'L2', or 'L3' terminals:
     • For 1-gang switches, connect to 'L1'.
     • For 2-gang switches, connect to 'L1' and 'L2'.
     • For 3-gang switches, connect to 'L1', 'L2', and 'L3'.
3. Fix the Switch onto the Wall:
   • Insert the switch into the switch box in the wall.
   • Mount the two side screws to secure the switch.
   • Install the glass panel by attaching it from the top.
   • Cover the glass front panel onto the switch.
4. Restore Power: Turn on the electricity at the circuit breaker. The LED light on the switch should flash quickly, indicating it's in standby mode for pairing.

5.2. US/AU/IT Standard Installation

1. Separate the Holder: Separate the mounting holder from the light switch.
2. Prepare Wiring:
   • Connect the Live (L) wire to the 'L' terminal on the switch.
   • Connect the Neutral (N) wire to the 'N' terminal on the switch.
   • Connect the bulb's load wire(s) to the 'L1', 'L2', or 'L3' terminals:
     • For 1-gang switches, connect to 'L1'.
     • For 2-gang switches, connect to 'L1' and 'L2'.
     • For 3-gang switches, connect to 'L1', 'L2', and 'L3'.
3. Fix the Switch onto the Wall:
   • Fix the holder onto the mount box with screws.
   • Mount the two side screws to secure the holder.
   • Insert the switch into the mount box.
   • Cover the front panel glass onto the switch.
4. Restore Power: Turn on the electricity at the circuit breaker. The LED light on the switch should flash quickly, indicating it's in standby mode for pairing.

5.3. Wiring Diagram for Wi-Fi Smart/ZigBee Curtain Switch

If you are installing a curtain switch, please follow these specific wiring instructions:

• L1: Connects to the open control line of the curtain motor.
• L2: Connects to the close control line of the curtain motor.
• N: Neutral line.
• L: Live line.
• Load Power: Curtain Motor: Max 300W.

6. Operation

6.1. Touch Control

The switch features a tempered glass touch panel. Use the '+' button to increase brightness, the light bulb icon button to turn the light on/off, and the '-' button to decrease brightness.

6.2. App Control (Tuya Smart Life App)

To use app control, you first need to pair your switch with the Tuya Smart Life app.

1. Download the App: Download and install the "Tuya Smart" or "Smart Life" app from your smartphone's app store.
2. Register/Login: Open the app and register for a new account or log in with an existing one.
3. Reset Device: Ensure the switch is powered on. Long press the '-' button on the switch for 10 seconds until the indicator light starts to flash rapidly. This clears the signal and puts the device into pairing mode.
4. Add Device: In the app, tap the '+' icon (usually in the top right corner) to add a new device. Select "Dimmer Switch" from the electrical category.
5. Confirm Indicator Status: Confirm that the indicator light on the switch is blinking rapidly in the app.
6. Connect to Wi-Fi: Select your 2.4 GHz Wi-Fi network and enter the password. (Note: 5GHz Wi-Fi is not supported).
7. Pairing: The app will begin searching for and connecting to the device. This may take a few minutes.
8. Device Added: Once successfully added, you can rename the switch and start controlling it.

6.2.1. Dimming via App

Once paired, open the switch interface in the app. You will see a slider or buttons to adjust the brightness from 0% to 100%.

6.2.2. Timing Function

Within the app, navigate to the scheduling or timer section for your switch. You can set specific times for the light to turn on or off, and even set repeat schedules.

6.2.3. Group Control

The app supports group control, allowing you to manage multiple smart switches simultaneously. Create groups for different rooms or scenarios to control several lights with a single command.

6.3. Voice Control

Integrate your smart switch with Amazon Alexa, Google Home, or Tmall Genie for convenient voice control.

1. Link Account: Follow the instructions in your smart assistant's app (Alexa app, Google Home app) to link your Tuya Smart Life account.
2. Discover Devices: Once linked, ask your smart assistant to discover new devices (e.g., "Alexa, discover my devices" or "Hey Google, sync my devices").
3. Voice Commands: Use commands such as:
   • "Alexa, turn on the [Light Name]"
   • "Hey Google, dim the [Light Name] to 50%"
   • "Alexa, turn off the [Light Name]"

7. Troubleshooting

• Switch not responding: Check if the main power is on. Ensure wiring is correct (Live and Neutral lines connected).
• Cannot pair with app:
  • Ensure your Wi-Fi network is 2.4GHz. 5GHz networks are not supported.
  • Make sure the switch indicator light is blinking rapidly during pairing mode. If not, reset the device by long-pressing the '-' button for 10 seconds.
  • Ensure your phone is close to the switch and Wi-Fi router during the pairing process.
  • Check your Wi-Fi password for accuracy.
• Dimming not working: Confirm that your lamp is compatible with dimming (LED or Tungsten lamps only). Energy-saving lamps are not supported for infinite dimming.
• Voice control not working:
  • Ensure your smart assistant account is correctly linked to your Tuya Smart Life account.
  • Try rediscovering devices through your smart assistant's app.
  • Check your Wi-Fi connection for both the switch and the smart assistant device.
• Total load exceeds 400W: If the lights flicker or the switch malfunctions, check the total wattage of the connected lamps. The total power of a chandelier group cannot exceed 400W.

8. User Tips

• For optimal performance, ensure your 2.4GHz Wi-Fi network is stable and the switch is within a reasonable range of your router.
• When pairing, if the device doesn't connect immediately, try resetting it again and ensure the indicator light is blinking quickly before attempting to add it in the app.
• Always double-check that your existing wiring includes a neutral line before purchasing or installing this smart switch to avoid compatibility issues.

9. Maintenance

• Clean the tempered glass panel with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Ensure the switch is kept dry and away from excessive moisture.
• Regularly check for firmware updates through the Tuya Smart Life app to ensure optimal performance and security.

10. Warranty & Support

For warranty information and technical support, please refer to the official SHINEKNOT website or contact your retailer. Keep your purchase receipt as proof of purchase.

A user manual in PDF format is available for download: User manual (PDF)