Tuya Tuya Mini 16A WiFi Smart Switch

Contents

Tuya Mini 16A WiFi Smart Switch User Manual

Models: MINI-W1-2CH, AP-SMT-Breaker02-1CH

1. Product Overview

The Tuya Mini 16A WiFi Smart Switch is a compact module designed to convert traditional switches into smart devices. It enables wireless remote control, voice control, and scheduling through the Smart Life app, Google Home, Alexa, and other compatible platforms. Its mini size allows for easy installation behind existing wall switches.

Tuya Mini WiFi Smart Switch Module

Figure 1: Tuya Mini WiFi Smart Switch Module (Model MINI-W1-2CH)

Video 1: Product Features and Installation Guide

2. Safety Information and Warnings

Important Safety Information:

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to high temperature or pressure.
  • Installation should only be performed by qualified personnel. Ensure power is disconnected before installation.

3. Setup and Installation

3.1 Package Contents

Before installation, verify that all components are present:

  • Tuya Mini WiFi Smart Switch Module
  • User Manual (this document)

3.2 Physical Installation

The smart switch module is designed to be placed behind your existing wall switch.

  1. Disconnect Power: Before starting any electrical work, ensure the main power supply to the circuit is turned off at the circuit breaker.
  2. Remove Wall Plate: Carefully remove the wall plate and the existing switch from the wall box.
  3. Connect Wiring: Refer to the wiring diagrams below for your specific setup. Connect the Live (L-in), Neutral (N-in), Load (L-out), and switch wires (S1, S2) to the corresponding terminals on the smart switch module.
  4. Place Module: Carefully place the smart switch module into the wall box behind the existing switch.
  5. Reinstall Switch: Reinstall your traditional wall switch and secure the wall plate.
  6. Restore Power: Turn the main power supply back on at the circuit breaker.
Easy Installation Diagram

Figure 2: Easy Installation Process

3.3 Wiring Diagrams

The smart switch supports various wiring configurations. It is compatible with rocker switches.

Three Wiring Methods

Figure 3: Wiring Methods

  1. Direct Connection to Light: Connects the smart switch directly to the light fixture.
  2. Connection to Light and 2-Way Rocker Switches: For controlling a light from two locations using 2-way switches.
  3. Connection to Light and a Single Rocker Switch: For controlling a light from one location using a single rocker switch.

3.4 App Pairing

After physical installation, pair the device with the Smart Life app:

  1. Download App: Download the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.