1. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
Warning:
- This product contains small parts and may have sharp edges. Keep out of reach of children under 3 years old to prevent choking hazards and injury.
- This product is manufactured in Mainland China.
For environmental protection, please dispose of packaging materials responsibly according to local regulations. Look for symbols like the 'Green Dot' or 'Recycling Loop' on packaging.
2. Product Overview
This product is a 3D ABS car emblem designed to enhance the appearance of your Skoda Octavia vehicle. It features a self-adhesive backing for easy installation on the car's rear trunk.
Product Details:
- Name: OCTAVIA/Octavia Badge Sticker
- Material: ABS (Emblem), PVC (Adhesive layer)
- Placement: Car Rear Trunk
- Features: Self-Adhesive Letters For Cars
- Package Contents: 1pc * OCTAVIA/Octavia Sticker (depending on selected variant)
Available Styles and Dimensions:
- "OCTAVIA" (New style): 20 cm (7.87 inches) Length x 2.2 cm (0.86 inches) Width
- "Octavia" (Old style): 7.2 cm (2.83 inches) Length x 1.8 cm (0.7 inches) Width
3. Installation Instructions
-
Preparation:
- Clean the car surface thoroughly with alcohol to remove any dirt, oil, dust, wax, or moisture. Ensure the surface is completely dry before proceeding.
- Avoid applying the emblem to a recently waxed car surface, as this may affect adhesion.
-
Placement:
- Carefully determine the desired flat placement area on your car's rear trunk, considering the emblem's size.
-
Application:
- Peel off the protective backing from the 3M adhesive tape on the back of the emblem.
- Align the emblem precisely with your chosen spot.
- Press down firmly on the emblem for at least 1 minute to ensure strong adhesion.
-
Post-Installation:
- Do not wash the car for at least 24 hours after installation to allow the adhesive to fully cure.
4. Maintenance & Storage
-
Cleaning:
To clean the emblem, use a soft, lint-free cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
-
Storage:
If not in use, store the emblem in a dry place at room temperature (15°C - 35°C / 59°F - 95°F) to preserve the adhesive quality.
5. Troubleshooting
-
Misaligned Letters:
If the letters appear misaligned or the spacing is uneven after initial application, it may be necessary to carefully remove and re-apply individual letters for optimal aesthetic results. Some emblems are designed for individual letter placement rather than as a single strip.
6. Specifications
| Feature | Detail |
|---|---|
| Item Type | Emblems |
| Special Features | Car Badge Sticker |
| Material | ABS (Emblem), PVC (Adhesive) |
| Car Maker | Skoda |
| Model Name | OCTAVIA/Octavia Emblem |
| Item Weight | 11g (0.024 lbs) |
| Item Length | 7.87 inches (20 cm) |
| Item Width | 0.86 inches (2.2 cm) |
| High-concerned chemical | None |
| Origin | Mainland China |
Package Dimensions:
- Length: 22 cm (8.66 inches)
- Width: 5 cm (1.97 inches)
- Height: 2 cm (0.79 inches)
- Weight: 0.017 kg (0.037 lbs)
7. User Tips
-
Individual Letter Placement:
Some users find that for perfect alignment and spacing, it is beneficial to carefully cut and apply each letter individually rather than relying solely on the pre-set spacing of the adhesive strip. This allows for greater precision in customization.
8. Frequently Asked Questions (FAQ)
No specific frequently asked questions are available for this product.
9. Support & Further Information
For any questions, technical support, or assistance regarding this product, please contact the seller directly through the platform where you made your purchase.
A detailed user manual in PDF format is also available for download: