Introduction
The NITECORE T4K is a powerful and compact quad-core intelligent keychain flashlight, boasting a maximum output of 4,000 lumens. It features a multifunctional OLED real-time display, a built-in 1,000mAh Li-ion battery with USB-C charging, and multiple user modes for versatile illumination. Its robust design ensures durability and reliable performance in various conditions.

Package Contents
Please check the box for the following items:
- NITECORE T4K Flashlight
- Key Clasp
- USB-C Charging Cable
- User Manual (PDF)

Key Features
- Utilizes 4 x CREE XP-L2 V6 LEDs with a max output of 4,000 lumens.
- Max peak beam intensity of 10,900cd and max throw of 209 meters.
- Utilizes a total reflective optic system for uniform and soft light.
- Multifunctional OLED real-time display for lumens, battery voltage, runtime, etc.
- Built-in 1,000mAh Li-ion battery.
- Advanced Power Cut-Off (APC) technology for an ultra-low standby power consumption.
- Built-in Li-ion battery charging circuit with a USB-C port.
- Highly efficient constant current circuit provides a stable output up to 67 hours.
- 2 user modes available (DEMO Mode and DAILY Mode).
- Dual side switch design.
- 5 brightness levels available with direct access to TURBO.
- Intelligent mode memory function.
- 2 lockout modes available (Half Lockout Mode and Full Lockout Mode).
- Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6).
- Metal ring pull able to withstand up to 30 kilograms of weight.
- HA III hard-anodized finish.
- Impact resistant to 1 meter.

Specifications
Technical Data
| Mode | Brightness | Runtime | Beam Distance | Peak Beam Intensity |
|---|---|---|---|---|
| TURBO | 4,000 Lumens | - | 209m | 10,900cd |
| HIGH | 200 Lumens | 2h 45min | 45m | 520cd |
| MID | 65 Lumens | 7h | 24m | 140cd |
| LOW | 15 Lumens | 21h | 13m | 43cd |
| ULTRALOW | 1 Lumen | 67h | 3m | 3cd |
Note: The stated data is measured using the built-in Li-ion battery (1,000mAh) under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.
General Specifications
- Dimensions: 82.3mm × 30mm × 29.2mm (3.24" × 1.18" × 1.15") (Clip Included)
- Weight: 77g (2.72oz) (Clip Included)
- Impact Resistance: 1m
- Water Resistance: IP54

Setup
Initial Preparation
- Remove Screen Protector: Before first use, please remove the protective film from the OLED display.
- Initial Charge: The T4K is equipped with a built-in Li-ion battery. Please fully charge the battery before its first use to ensure optimal performance. Refer to the 'Charging Function' section for detailed instructions.
Operating Instructions
OLED Display
The T4K features a multifunctional OLED display. When the light is turned on, the screen will successively show the current information (Brightness Level & Lumens, Runtime Remaining, User Mode) before it goes out. After the screen goes out, a short press of the Mode Button can reactivate the screen.

Display Demonstration Function
This function is for demonstration purposes only and does not reflect the actual light status. To enter: When the light is off, keep holding the Power Button even after ULTRALOW is accessed until the light is turned off. The screen will then cycle through various informational displays. Short press either button to exit this status.
On/Off
- Turn On: When the light is off, short press the Power Button.
- Turn Off: When the light is on, short press the Power Button.
User Modes
The T4K has two user modes: DEMO Mode and DAILY Mode.
- DEMO Mode: The light will automatically shut down if there is no operation for 30 seconds (excluding screen reactivation). A countdown will be displayed on the screen.
- DAILY Mode: The light will not automatically shut down and must be turned off manually.
Note: The default setting is DEMO Mode. It is recommended to switch to DAILY Mode for daily use.

Mode Switching
When the light is on or off, long press both the Power Button and the Mode Button simultaneously to switch between DEMO and DAILY Mode. The LEDs will flash to indicate the current user mode:
- 1 flash: DEMO Mode
- 2 flashes: DAILY Mode
The screen will also display "DEMO" or "DAILY" to confirm the current user mode.

Brightness Levels
When the light and screen are on, short press the Mode Button to cycle through the following brightness levels: ULTRALOW → LOW → MID → HIGH. The flashlight will directly access the previously memorized brightness level when activated.
Note: If the screen is off, short press the Mode Button to activate the screen before adjusting the brightness level.

Direct Access to ULTRALOW
When the light is off, long press the Power Button to directly access ULTRALOW.
Direct Access to TURBO
When the light is on or off, press and hold the Mode Button to access TURBO. Release the button to return to the previous status.
Note:
- When activating TURBO, a countdown progress bar will be shown on the display to indicate the activation time for TURBO after showing the current brightness level and lumens.
- If you continue to hold the Mode Button after the progress bar is depleted, the flashlight will access HIGH Level instead, and the display will turn off.
- The activation time for TURBO depends on the thermal status of the flashlight. The higher the temperature the flashlight gets, the shorter the activation time for TURBO when it is reactivated.
- Use caution when operating the light in TURBO to avoid overheating and step down to a lower level if the light becomes too hot to handle.

Lockout/Unlock Mode
The T4K has two lockout modes: Half Lockout Mode and Full Lockout Mode.
- Half Lockout Mode (Lockout 1): When the light is on, press and hold the Power Button until the screen shows the Lockout 1 icon. The light will turn off and enter Half Lockout Mode. In this mode, the Power Button is unavailable to activate the flashlight, but holding the Mode Button is still available for accessing TURBO.
- Full Lockout Mode (Lockout 2): When the light is on, keep holding the Power Button even after accessing Half Lockout Mode until the screen shows the Lockout 2 icon. The light will turn off and enter Full Lockout Mode. In this mode, both buttons are unavailable to activate the flashlight.
- Unlock: In either Lockout Mode, short press and then long press the Power Button. The screen will show an unlock icon and a progress bar until the flashlight is activated to exit Lockout Mode. The light will access the previously memorized level. The light will be automatically unlocked when being recharged in either Lockout Mode.

Advanced Temperature Regulation (ATR)
The integrated ATR technology regulates the output of the T4K according to the working condition and ambient environment to maintain optimal performance.

Power Indication
When the light is off, short press the Mode Button to display the battery level, battery voltage, memorized brightness level, and current user mode before the screen goes out. Different voltages represent the corresponding remaining battery power levels.
Note: When the battery voltage is below 3.4V, the blue power indicator beneath both buttons will flash every 2 seconds to inform the user to recharge the battery as soon as possible.
Charging Function
The T4K is equipped with an intelligent charging system. Please charge the battery before the first use.
Connecting to External Power
Use the USB-C cable to connect an external power supply (e.g., a USB adapter, a computer, or other USB charging devices) to the USB-C port on the T4K to begin the charging process. The charging time is approximately 1 hour and 30 minutes.
Charging Indicator
During the charging process, the charging indicator will flash slowly, and the screen will show the current battery level. When the battery is fully charged, the charging indicator will become steadily turned on, and the screen will display a full battery level.
Note: The light can still be activated during the charging process (TURBO mode excluded).

Maintenance
- Regular Recharging: If the product is left unused for a prolonged time, please recharge it every 3 months to maintain battery health.
- Cleaning: Keep the flashlight clean from dust and debris. Use a soft, damp cloth for cleaning.
- Storage: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
Q: Why does my T4K shut down in 30 seconds?
A: The T4K has two user modes: DEMO Mode and DAILY Mode. The default setting is DEMO Mode, where the product will automatically shut down if there is no operation for 30 seconds (screen reactivation excluded). It is recommended to switch to DAILY Mode when in daily use to prevent automatic shutdown. Refer to the 'Mode Switching' section for instructions.
User Tips
- The T4K's beam is wide and rich, with a range of 1-200 lumens, sufficient for most common uses.
- The Turbo mode offers impressive power for its small size and maintains stability for 20-30 seconds without overheating due to good heat dissipation.
- The compact size and powerful output make it an excellent choice for everyday carry.
Safety Warnings
- The TURBO Brightness Level of 4,000 lumens will produce massive heat rapidly during long-time activation. Use caution when operating the light in TURBO mode to avoid overheating and step down to a lower level if the light becomes too hot to handle.
- CAUTION! Possible dangerous radiation! Do not look directly into the light! It may be dangerous for your eyes.
- Please recharge the product every 3 months when left unused for a prolonged time.
- The product contains small assembly parts. Please keep it away from children to avoid danger of choking or suffocation.
- When the flashlight is kept in a backpack, please activate the Lockout Mode to prevent accidental activation.
- DO NOT disassemble, modify, or reconstruct the product, otherwise the warranty will be nullified, and the product might be damaged.
Warranty and Support
Warranty Service
All NITECORE products are warranted for quality. Any DOA/defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective/malfunctioning NITECORE products can be repaired free of charge within 24 months from the date of purchase. Beyond 24 months, a limited warranty applies, covering the cost of labor and maintenance but not the cost of accessories or replacement parts.
The warranty will be nullified if:
- The product(s) is/are broken down, reconstructed, and/or modified by unauthorized parties.
- The product(s) is/are damaged due to improper use.
For the latest information on NITECORE products and services, please contact a local NITECORE distributor or send an email to service@nitecore.com.
Contact Information
SYSMAX Innovations Co., Ltd.TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Website: www.nitecore.com
Address: Unit 6355, 5/F No. 1021 Gaopu Road, Tianhe District, Guangzhou, 510653 Guangdong, China.
PDF User Manual
A PDF version of this manual is available for download and printing:
Product Video
Watch the official product video for a visual guide on the NITECORE T4K's features and operation.