YIHUA YIHUA 706 II / T12

Contents

YIHUA 706 II / T12 Soldering and Rework Station User Manual

ESD-Safe & 2-in-1 Rework Station

1. Introduction

Thank you for choosing the YIHUA 706 II / T12 Soldering and Rework Station. This versatile tool is designed for precision soldering and desoldering tasks, offering both a T-12 soldering iron and a blower-type hot air gun. It features rapid heating, precise temperature control, and intelligent functions like auto-sleep mode to enhance efficiency and prolong tool lifespan. Please read this manual carefully before operation and keep it for future reference.

2. Important Safety Information

WARNING: Before initial use and transportation, ensure the compressor motor's locking bolt is handled correctly. The locking bolt is located at the bottom of the station. It MUST be installed for transportation and REMOVED before operation. Failure to do so can cause serious damage to the unit.

  • Always operate the station in a well-ventilated area.
  • The hot air gun and soldering iron tips can reach very high temperatures. Avoid direct contact with skin to prevent burns.
  • Keep a minimum distance of 2mm between the hot air gun's air outlet and the subject being worked on.
  • Do not point the hot air gun towards people or flammable materials.
  • Ensure the air outlet of the hot air gun is clear and free of blockages at all times.
  • Install hot air nozzles ONLY when the steel pipe and nozzle have cooled. Do not use brute force or over-tighten.
  • Initial use of the hot air gun may emit white fumes; this is normal and will dissipate shortly.
  • Always turn off the master switch and disconnect the power cord when the station is not in use for an extended period.

3. Package Contents

Verify that all items are present in your package:

  • YIHUA 706 II / T12 Rework Station (Main Unit)
  • T-12 Soldering Iron
  • Blower Type Hot Air Gun
  • Hot Air Nozzles (various sizes: Φ5mm, Φ8mm, Φ10mm)
  • Soldering Iron Stand with cleaning sponge/brass wool
  • Solder Wire
  • Soldering Iron Tips/Heating Elements
YIHUA 706 II Rework Station with included accessories: main unit, hot air gun, soldering iron, various nozzles, soldering iron stand, solder wire, and tips.
YIHUA 706 II Rework Station and its accessories.

4. Product Overview and Features

The YIHUA 706 II / T12 is an integrated soldering and rework station designed for precision and ease of use.

  • Dual-Display: Visually see the hot air and soldering temperatures simultaneously without additional switching.
  • Independent Switches: Supports simultaneous or separate operation of the soldering iron and hot air gun.
  • Stable Airflow: Continuous and stable airflow generated by the blower prevents chip displacement due to airflow fluctuations.
  • Rapid Heating: Ceramic heating element and high-flow blower quickly reach the set temperature.
  • Zero Delay Temperature Compensation: Continuous air supply ensures constant temperature, avoiding virtual welding caused by temperature drops.
  • One-Piece Soldering Iron Tip: Easy to assemble and provides efficient heat transfer.
  • Adjusting Knobs: Quickly and smoothly set target temperatures and air volume.
  • Auto/Manual Modes: Hot air gun can operate in automatic standby mode or continuous manual mode.
  • Temperature Unit Conversion: Easily switch between Celsius (°C) and Fahrenheit (°F).
  • 10-Minute Sleep Mode: Automatically reduces soldering iron temperature to 200°C (392°F) after 10 minutes of inactivity, reducing wear and extending lifespan.
Image showing the dual display and independent switches of the YIHUA 706 II rework station.
Dual-display and independent switches for precise control.
Diagram illustrating stable airflow, rapid heating, zero delay temperature compensation, and even heating features of the hot air gun.
Key features of the hot air rework station.
Diagram showing the internal structure of the one-piece soldering iron tip and its heating mechanism.
One-piece soldering iron tip for efficient heating.

5. Initial Setup

  1. Unpacking and Locking Bolt Removal: Carefully unpack the station. Locate and REMOVE the red locking bolt from the bottom of the unit before use. This bolt secures the compressor motor during transit.
  2. Positioning: Place the rework station on a stable, heat-resistant surface. Install the hot air gun holder on the left side of the station.
  3. Connecting Hot Air Gun: Connect the hot air gun hose to the designated port on the front panel. Place the hot air gun into its holder.
  4. Connecting Soldering Iron: Connect the soldering iron cable to the receptacle (10) on the front panel. Place the soldering iron into its stand.
  5. Nozzle Installation: Select the appropriate hot air nozzle and install it onto the hot air gun. Ensure the hot air gun is cool before attaching or removing nozzles.
  6. Power Connection: Connect the station's power cord to a suitable electrical outlet.
Close-up of the adjusting knobs on the YIHUA 706 II rework station, showing the air volume and temperature controls.
Adjusting knobs for precise control.

6. Operating Instructions

6.1. Control Panel Guide

Front panel of the YIHUA 706 II rework station with labels for each control: Power Switches, Temperature Displays, Adjustment Knobs, Air Volume, Hot Air Gun, Mode Switch, Temperature Unit Switch, Soldering Iron Receptacle.
Front Panel Layout (YIHUA 706 II / 706 / 706+)
  1. Power Switch (Soldering Station): Turns the soldering iron on/off.
  2. Power Switch (Hot Air Rework Station): Turns the hot air gun on/off.
  3. Temperature Display (Hot Air Rework Station): Shows the current hot air temperature.
  4. Temperature Adjustment Knob (Hot Air Rework Station): Adjusts the hot air gun temperature.
  5. Air Volume Adjustment Knob: Adjusts the hot air gun's airflow.
  6. Hot Air Gun: The hot air tool.
  7. Hot Air Gun Manual/Automatic Mode Switch Button: Toggles between manual and automatic standby modes.
  8. Temperature Display (Soldering Station): Shows the current soldering iron temperature.
  9. °F/°C Temperature Display Switch: Toggles between Fahrenheit and Celsius temperature units.
  10. Receptacle (Soldering Iron): Connection port for the soldering iron.
  11. Temperature Adjustment Knob (Soldering Station): Adjusts the soldering iron temperature.

6.2. Hot Air Rework Station Operation

  1. Ensure the hot air gun is in its holder.
  2. Turn ON the master switch (rear of the station) and then the Hot Air Rework Station's power switch (2).
  3. The hot air temperature display (3) will show "---" indicating standby mode.
  4. Use the Temperature Adjustment Knob (4) to set the desired temperature.
  5. Pick up the hot air gun (6). The operation indicator light will turn ON. It will stay ON during heating, blink rapidly when stable, and turn OFF when cooling.
  6. Adjust the Air Volume Adjustment Knob (5) to set the desired airflow.
  7. When finished, place the hot air gun back into its holder. The heating element will automatically cut power, and the operation indicator light will turn OFF. The hot air gun will continue to blow air without heating to cool down. Once the temperature drops below 100°C (212°F), the display will show "---".
  8. Turn OFF the Hot Air Rework Station's power switch (2). For extended non-use, turn off the master switch and disconnect power.
Image showing the internal blower of the hot air gun and various nozzle sizes (5mm, 8mm, 10mm).
Blower Air Type: Maximum 168L/min with compressor motor air supply.

6.3. Soldering Station Operation

  1. Ensure the soldering iron is connected to the receptacle (10) and placed in its stand.
  2. Turn ON the master switch (rear of the station) and then the Soldering Station's power switch (1).
  3. Use the Temperature Adjustment Knob (11) to set the desired temperature.
  4. The soldering iron's operation indicator light will turn ON during heating, blink rapidly when stable, and turn OFF when cooling.
  5. First Use Tip: Upon the first use of a new soldering iron tip, set the temperature to 250°C (482°F). When the iron is just hot enough to melt solder, coat the tip with a layer of rosin core solder. Then, set the temperature to your desired working temperature.
  6. When finished, clean the soldering iron tip, re-tin it with a fresh layer of solder, and place it back in the stand. Turn OFF the Soldering Station's power switch (1). For extended non-use, turn off the master switch and disconnect power.

6.4. Automatic/Manual Hot Air Modes

Use the Hot Air Gun Manual/Automatic Mode Switch Button (7) to toggle between modes:

  • Automatic Mode (AT): When the hot air gun is returned to the holder, the heating element's power turns OFF, and the gun enters standby mode (temperature display shows "---").
  • Manual Mode (MT): When the hot air gun is returned to the holder, the station continues to heat and operate.
Image showing the hot air gun in auto mode (stops when on holder) and manual mode (still works when on holder).
Hot Air Gun Auto Mode vs. Manual Mode.

6.5. Temperature Unit Conversion (°C/°F)

Press the °F/°C Temperature Display Switch (9) to toggle between Celsius and Fahrenheit display units, meeting different user preferences.

Image showing the temperature display switching between Celsius and Fahrenheit.
°C/°F Conversion for temperature display.

6.6. 10-Minute Sleep Mode

The soldering iron automatically enters sleep mode after approximately 10 minutes of inactivity. In sleep mode, the temperature drops to 200°C (392°F) to prevent tip oxidation, reduce wear, and extend its lifespan.

To wake the soldering iron from sleep mode:

  • Gently shake the soldering iron a few times, or
  • Turn OFF the power switch (1) and then turn it ON again.
Diagram illustrating the 10-minute sleep mode where the soldering iron temperature drops from 480°C to 200°C over time.
10-Minute Sleep Mode: Reduces wear and extends lifespan.

6.7. Cool/Hot Air Mode

When the hot air gun is started, pressing its switch will cause the displayed temperature to decrease. If the temperature cools to below 70°C (158°F), the display will show "COL", indicating it's in Cool Air mode. Press the switch again to re-enter Hot Air mode and begin heating.

6.8. Product Demonstration Video

Official product demonstration video showcasing key features and operation.

7. Maintenance and Precautions

7.1. Soldering Iron Tip Care

  • Cleaning: After each use, wipe the soldering tip with a wet sponge or metal wool ball. Re-tin the tip with a fresh layer of solder to prevent oxidation.
  • Oxidation Removal: If a layer of oxidation forms on the tip, set the temperature to 300°C (572°F). Once stable, gently rub the tip inside a metal wool ball while applying solder until it's fully coated. If severely oxidized, replace the tip.
  • Avoid Filing: Do NOT use metal files to remove oxidation. This can damage the tip.
  • Pressure: Do NOT apply excessive force when soldering, as this will not improve heat transfer and can damage the tip.
  • Idling Temperature: When placing the soldering iron back in the holder after high-temperature operation, adjust the temperature to 250°C (482°F) or below for idling. This prevents accelerated aging of the heating element.

7.2. Hot Air Gun Maintenance

  • Air Outlet: Keep the air outlet clear and free of blockages.
  • Nozzle Installation: Install nozzles ONLY when the steel pipe and nozzle have cooled. Do not use brute force or over-tighten.
  • Steel Tube Discoloration: The hot air gun and soldering iron handles use high-strength stainless steel tubes. It is normal for the steel tube to exhibit a light bronze color due to quality control processes and heat exposure; this does not affect performance.

8. Troubleshooting Guide

  • Display shows "S-E": This indicates a faulty sensor module in the hot air gun or soldering iron, or the soldering iron is not properly connected. Replace the heating element (which includes the sensor) or ensure the soldering iron is securely plugged in.
  • Heating Element Replacement: When replacing a heating element, ensure the wires are connected in the correct order and color to avoid incorrect connections.
  • Display shows "SLP": This indicates that the soldering station is in sleep mode. Refer to section 6.6 for how to wake it up.

9. Specifications

Feature Specification
Rated Power 670W
Control Unit Dimensions L235 x W186 x H124 ±5mm
Operating Ambient Temp. 0-40°C / 32-104°F
Display LED
Air Delivery Compressor Motor
Air Volume ≤168L/min
Hot Air Rework Station Temp. Range 100-480°C / 212-896°F
Soldering Station Temp. Range 200-480°C / 392-896°F
Tip to Ground Resistance <2 ohms
Certification CE, FCC
Origin Mainland China
Package Dimensions (L x W x H) 25cm x 18cm x 12cm
Package Weight 3.1 kg
Table of YIHUA 706 II specifications including rated power, dimensions, temperature ranges, and air volume.
Detailed product specifications.

10. Compatible Nozzles

The YIHUA 706 II / T12 supports various hot air nozzles for different applications, including SOIC, CHIP, QFP, PLCC, BGA, and SMD components. It is recommended to use larger diameter nozzles when possible. For smaller nozzles, ensure maximum air volume and lower temperature settings to prevent damage.

For a detailed guide on compatible nozzle styles and their corresponding IC sizes, please refer to the official user manual PDF available at: YIHUA 706 II User Manual (PDF).

11. User Tips

  • Tip Longevity: Always keep your soldering iron tip clean and properly tinned. This is the most crucial step for extending tip life and ensuring good solder joints.
  • Temperature Control: Experiment with different temperature settings for both the soldering iron and hot air gun to find the optimal heat for your specific components and solder types.
  • Airflow Management: When using the hot air gun, adjust the airflow carefully. Too much airflow can displace small components, while too little might not provide sufficient heat.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the manufacturer or your authorized dealer. Keep your purchase receipt as proof of purchase.

For the complete user manual and additional details, please download the PDF version: YIHUA 706 II User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.