1. Product Overview
This manual provides instructions for the installation, operation, and maintenance of your new CNC aluminum motorcycle brake and clutch levers. These levers are designed to be adjustable and foldable, offering enhanced ergonomics and durability for compatible Ducati models.

Figure 1: Overview of the Motorcycle Brake and Clutch Levers
Video 1: Product demonstration showing the levers' features and adjustability.
2. Setup and Installation
Before beginning installation, ensure your motorcycle is stable and turned off. It is recommended to have basic mechanical knowledge or seek professional assistance.

Figure 2: Installation Guide for Brake and Clutch Levers
Installation Steps:
- Step 1: Remove Old Levers
Carefully loosen and unscrew the pivot bolt securing the old brake and clutch levers. Remove the old levers from their respective mounts. - Step 2: Align New Levers
Align the new brake and clutch levers with the pivot point (hole) on your motorcycle's handlebar mounts. Ensure they fit smoothly without force. - Step 3: Secure New Levers
Insert and tighten the pivot bolt. Apply a torque of 8-10 N-m (or 10-12 N-m as indicated in some diagrams) to secure the levers. Do not overtighten. - Step 4: Adjust Lever Angle
Once secured, adjust the lever angle to a comfortable reach. This can typically be set between 30-45 degrees from horizontal, or to your personal preference. Test the feel and ensure full range of motion for both brake and clutch.
Important: After installation, always test the brake and clutch functionality thoroughly before riding. Ensure there is no binding and that both levers operate smoothly and return to their resting positions correctly.
3. Operating Instructions
Your new levers feature multiple adjustment points for personalized comfort and performance.
Lever Adjustment:
- Reach Adjustment: The levers are equipped with a 6-position adjuster. Rotate the small wheel or lever near the pivot point to move the lever closer to or further from the handlebar. Find the position that provides the most comfortable and effective grip for your hand size and riding style.
- Extendable Length: The levers are extendable from 17cm to 19cm. This allows you to adjust the length of the lever to suit your preference, providing more leverage or a more compact feel. Loosen the small screw on the lever end, extend or retract, and then re-tighten.
- Foldable Design: The levers are designed to fold upwards (90 degrees) in the event of a fall or impact. This anti-breakage feature helps prevent damage to the levers themselves. After an impact, simply fold the lever back into its operating position.

Figure 3: Lever Adjustment Features (6-level adjustment, 90° foldable, adjustable length)
4. Maintenance
Proper maintenance will ensure the longevity and optimal performance of your levers.
- Regular Inspection: Periodically check all fasteners (pivot bolts, adjustment screws) to ensure they are tight. Loose components can affect performance and safety.
- Cleaning: Clean the levers with a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the anodized finish. Dry thoroughly after cleaning.
- Lubrication: Apply a small amount of appropriate grease or lubricant to the pivot points and adjustment mechanisms annually, or as needed, to ensure smooth operation.
- Damage Check: After any fall or impact, inspect the levers for bends, cracks, or other damage. Replace damaged levers immediately.
5. Troubleshooting
- Levers Feel Loose: Check the pivot bolt torque. Ensure it is tightened to the recommended specification (8-12 N-m). If the issue persists, inspect for wear in the pivot bushing or mounting points.
- Difficulty Adjusting Reach: Ensure the adjustment mechanism is clean and free of debris. Apply a small amount of lubricant if it feels stiff. Do not force the adjustment.
- Levers Not Returning Properly: Check for any binding or obstruction. Ensure the pivot bolt is not overtightened, which can cause binding. Lubricate pivot points.
- Clutch Sensor Issues: If your motorcycle uses a clutch sensor and you experience issues after installation, ensure the new lever fully engages/disengages the sensor switch. Minor adjustments or shimming might be required for proper sensor activation, depending on your specific motorcycle model.
6. Specifications
| Feature | Specification |
|---|---|
| Material | Machined CNC Billet 6061 T6 Aluminum |
| Adjustment | 6-Position Lever Reach Adjustment |
| Fasteners | Stainless Steel |
| Extendable Length | 17cm - 19cm |
| Foldable | 90-degree Foldable (Anti-breakage) |
| Quantity | 2 PCS (1 Brake Lever, 1 Clutch Lever) |
| Origin | Mainland China |
Compatible Models:
- Ducati Monster 821 (2015-2021)
- Ducati Monster 821 Stealth (2020-2021)
- Ducati Monster 797 (2017-2020)
- Ducati Hypermotard 820 (2013-2015)
- Ducati Multistrada 950 (2017-2018)
7. User Tips
- Verify Fitment: Always double-check the compatibility of these levers with your specific motorcycle model and year before purchasing and installing. If your model is not listed, contact the seller for confirmation.
- Clutch Type: Confirm if your motorcycle uses a hydraulic or cable clutch, and ensure the levers are compatible with your system.
- Inspect Upon Arrival: Carefully inspect the product for any cosmetic imperfections or manufacturing defects upon delivery.
- Aesthetic Preference: Consider if the prominent 'DUCATI' branding on the levers aligns with your aesthetic preferences.
- Professional Installation: If you are unsure about the installation process, it is highly recommended to have the levers installed by a qualified motorcycle mechanic.
8. Warranty and Support
For any warranty claims, technical support, or further inquiries, please contact the seller directly through your purchase platform. Keep your order details handy for faster assistance.