Kysplosion LT1025A

Contents

KYS Electric Brushless Motor Cordless Cutter User Manual

Model: LT1025A

Introduction

This manual provides safety instructions and operational guidelines for the KYS Electric Brushless Motor Cordless Cutter. Please read and fully understand this manual before using, maintaining, or servicing the machine. Product specifications are subject to change based on product improvement needs.

The KYS Electric Brushless Motor Cordless Cutter is a versatile tool designed for household garden lawn trimming and weeding. It features a brushless motor for efficient and powerful operation.

KYS Electric Brushless Motor Cordless Cutter with accessories
Figure 1: KYS Electric Brushless Motor Cordless Cutter and included accessories (gloves, wrench, blades, string).

Safety Instructions

WARNING: Failure to follow these safety instructions may result in serious injury or property damage.

  1. Children are prohibited from using this equipment.
  2. Operate the equipment in environments with sufficient light and ensure no other individuals are present in the mowing area.
  3. Avoid using the equipment on grounds with steel pipes or many stones, especially in rainy conditions.
  4. Inspect the equipment thoroughly before each use. If any damage or wear is found, replace the affected parts before operation.
  5. Do not wear loose clothing during operation. Keep hair, hands, and feet clear of all running parts of the equipment.
  6. Do not expose the equipment to rain or humid conditions to prevent water from entering batteries and motors, which can cause damage.
  7. Always disconnect the power supply when the equipment is unattended, when clearing obstacles, when abnormal vibration occurs, or when replacing blades. Wait until the blade has completely stopped before performing any other operations.

Setup

1. Installing the Circular Saw Blade

Follow these steps to install the circular saw blade:

  1. Use the wrench to remove the nut, iron pieces, and cover clockwise.
  2. Place the metal base first and secure its position by tightening the plug.
  3. Install the blade and then place the small round iron piece on the blade.
  4. Install the aluminum cover and the nut in turn.
  5. Secure the plug in place and then tighten the nut counter-clockwise with a hex wrench.
  6. Install the Protection Cover.
Six-step visual guide for installing the circular saw blade on the trimmer.
Figure 2: Circular Saw Blade Installation Steps.

2. Installing the Grass Rope (Trimming Head)

WARNING: You cannot use the wheels at the same time when installing the grass rope.

  1. Install the trimming head tightening nut.
  2. Insert the weeding rope into the weeding head.
  3. Tighten the weeding head.

3. Battery Compatibility

This cordless cutter is designed for use with Milwaukee 18V batteries. Compatible models include 48-11-1811, 48-11-1815, 48-11-1820, 48-11-1822, 48-11-1828, 48-11-1840, 48-11-1841, 48-11-1850, and more. Please note that batteries are not included with the tool.

KYS Cordless String Trimmer compatible with Milwaukee 18V batteries
Figure 3: Compatible Milwaukee 18V Batteries.

Operating Instructions

This machine is suitable for family use and specifically for mowing grass in garden lawns.

1. Powering On/Off

To switch on the trimmer, the safety button and the main switch must be pressed simultaneously. Release the switch to turn off the trimmer.

Trimmer showing safety lock and pole adjustment options
Figure 4: Safety Lock and Pole Adjustment for Comfort and Flexibility.

2. Adjusting the Pole Length and Angle

  • The telescopic rod allows for adjustable length, typically from 50 inches to 60 inches, to suit user height and comfort.
  • The trimmer head features an adjustable design, allowing for a 180-degree angle adjustment. Press the button to adjust the angle for effective weed control on edges and various terrains.
Trimmer showing 180-degree adjustable head for edge trimming
Figure 5: Adjustable Design for Effective Weed Control on Edges.

3. Operation Demonstration

Watch the video below for a demonstration of the KYS Electric Brushless Motor Cordless Cutter in action, effectively trimming grass.

Video 1: Demonstration of the KYS Cordless Cutter trimming grass.

Maintenance

  • Regularly inspect the equipment for any signs of damage or wear, especially the blades and trimming head. Replace worn-out parts immediately.
  • Keep the equipment clean and free from grass clippings and debris. Disconnect the power supply before cleaning.
  • Store the trimmer in a dry place, away from moisture, to prevent damage to the battery and motor.
  • Ensure the battery is charged according to the manufacturer's recommendations.

Troubleshooting

Problem Possible Cause Solution
Trimmer does not start Battery not charged or improperly installed; Safety button not pressed simultaneously with main switch. Ensure battery is fully charged and correctly inserted. Press the safety button and main switch at the same time.
Reduced cutting performance Dull or damaged blade/string; Excessive grass/debris buildup. Replace blade/string. Clean the trimming head and guard.
Excessive vibration Damaged or unbalanced blade/string; Loose components. Inspect and replace blade/string if necessary. Tighten all fasteners. If vibration persists, discontinue use and seek professional assistance.

Specifications

Feature Detail
Model LT1025A
Brand Name Kysplosion
Motor Type Brushless
Power Source Electricity (Cordless, Battery-powered)
Battery Included No
Compatible Battery Milwaukee M18 18V series (e.g., 48-11-1811, 48-11-1850)
Battery Voltage 24V (no-load)
Charging Time 1-2 hours
Run Time (approx.) 0.5-3 hours (depending on load and battery capacity)
Idle Speed 25000 rpm
Material Steel pipe/aluminium pipe, ABS engineering plastics
Certification CE
Package Dimensions (L x W x H) 60 cm x 26 cm x 12 cm
Package Weight 3.04 kg
Diagram of the upgraded brushless motor highlighting its features
Figure 6: Upgraded Brushless Motor Features: Super Cutting Torque, More Efficient and Powerful, Long Lifetime, Reduced Noise.

User Tips

  • This trimmer is highly recommended for small to medium-sized garden projects due to its effective performance.
  • Users have noted that the tool is more powerful than expected, making it efficient for various trimming tasks.
  • The construction is reported to be sturdy, providing a reliable user experience.
  • Ensure you have a compatible Milwaukee M18 18V battery for operation, as it is not included.

Warranty and Support

For detailed warranty information and customer support, please refer to the official product page or contact the seller directly. A user manual in PDF format is also available for download from the product page for comprehensive guidance.

For additional information and documents, please refer to the User Manual (PDF).

© 2023 KYSplosion. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.