PowMr POW-SunSmart SP5.2K

Contents

PowMr 5.2KW Split-Phase Hybrid Solar Inverter

Model: POW-SunSmart SP5.2K

1. Introduction

The PowMr POW-SunSmart SP5.2K is a 5.2KW split-phase hybrid solar inverter designed to convert 48VDC battery power to 120/110VAC. It features a 100A MPPT solar charger, making it suitable for various solar power systems. This inverter supports both lead-acid and lithium batteries and can operate in a batteryless mode, powering loads directly from the PV/AC grid. It is capable of parallel operation with up to 6 units for increased power output and flexibility.

PowMr 5.2KW Hybrid Solar Inverter with display showing power output and battery status.
Figure 1: PowMr 5.2KW Hybrid Solar Inverter front view, highlighting key features like 5200W output, 6000W Max PV Input, 100A MPPT, and 48VDC battery voltage.

2. Safety Information

Please read all instructions and cautionary markings on the unit and in this manual before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury. Keep this manual for future reference.

  • Only qualified personnel should install and maintain this device.
  • Ensure all wiring is performed by a certified electrician and complies with local and national electrical codes.
  • Do not disassemble the unit. There are no user-serviceable parts inside.
  • Ensure proper grounding of the inverter.
  • Disconnect all power sources (PV, battery, AC input) before performing any maintenance or wiring.
  • Avoid contact with live terminals.
  • Install the inverter in a well-ventilated area, away from flammable materials and corrosive gases.

3. Setup and Installation

3.1 Unpacking and Inspection

Upon receiving the inverter, carefully unpack it and inspect for any damage that may have occurred during transit. Ensure all components listed in the packing list are present. If any damage or missing parts are found, contact your dealer immediately.

3.2 Mounting the Inverter

Mount the inverter vertically on a sturdy wall or suitable surface. Ensure adequate clearance around the unit for proper ventilation. Avoid direct sunlight, high temperatures, and high humidity environments.

3.3 Wiring Connections

All wiring must be done in accordance with local and national electrical codes. Refer to the wiring diagram below for correct connections. Professional guidance is required for actual connections.

Detailed wiring diagram for the PowMr Hybrid Solar Inverter, showing connections for solar panels, battery, AC input (utility/generator), AC output (loads), and an electric box with circuit breakers.
Figure 2: Wiring Diagram for the PowMr Hybrid Solar Inverter. This diagram illustrates the connections for solar panels (in series), battery, AC input from utility or generator, and AC loads. It also shows the integration with an external electric box containing various circuit breakers and surge protection devices.

Key components and their specifications in the Electric Box-A (as per diagram):

  • PV Input Circuit Breaker: 1000V-2P-25A
  • PV Input Surge Protection Device: 600V-2P-40kA
  • Battery Power Circuit Breaker: 600V-2P-125A
  • AC Input/Output Circuit Breaker: 400V-2P-63A
  • AC Input Surge Protection Device: 275V-2P-40kA

3.4 Battery Connection

The inverter is compatible with 48V battery types, including AGM, GEL, Flooded, and Lithium batteries. Ensure the battery bank voltage is 48VDC (minimum starting voltage 44V).

Diagram showing compatibility with AGM, GEL, Flooded, and Lithium 48V battery types.
Figure 3: Battery Compatibility. The inverter supports various 48V battery chemistries including AGM, GEL, Flooded, and Lithium.

For lithium batteries, the inverter features a dual activation function to wake up sleeping lithium-ion batteries. This means that access to mains/PV power can activate the lithium-ion battery.

Illustration of the inverter connected to multiple 48V LiFePO4 batteries, emphasizing compatibility and the dual activation feature.
Figure 4: Inverter connected to a bank of 48V LiFePO4 batteries, demonstrating the system's ability to power loads from PV/AC without a connected battery (batteryless mode) and the dual activation function for lithium batteries.

3.5 Parallel Connection

The PowMr POW-SunSmart SP5.2K supports parallel operation of up to 6 units. This allows for increased power capacity and flexibility in system design. For split-phase 240V or 3-phase 208V setups, you can stack 2 units for 240V split-phase or 3 units for 208V 3-phase. An optional 6-in-1 parallel kit can expand the total capacity up to 31.2KW.

Diagram showing three inverters connected in parallel to a 48V battery bank, with parallel communication and power cables indicated.
Figure 5: Parallel Connection Setup. This diagram illustrates how multiple inverters can be connected in parallel to a shared 48V battery bank, using parallel communication cables and positive/negative power cables. Professional guidance is recommended for complex parallel installations.

4. Operating Instructions

4.1 Powering On/Off

  1. Ensure all wiring connections are secure and correct.
  2. Turn on the battery breaker first.
  3. Turn on the PV input breaker (if solar panels are connected).
  4. Turn on the AC input breaker (if utility/generator is connected).
  5. Press and hold the power button on the inverter for a few seconds to turn it on.
  6. To power off, reverse the sequence: turn off AC input, then PV input, then battery breaker, and finally the inverter.

4.2 Display and Settings

The inverter features an intuitive display that shows real-time operational data such as power output, battery status, PV input, and AC input/output. Use the buttons adjacent to the display to navigate through menus and adjust settings. Refer to the detailed settings menu in the full product manual for advanced configurations.

4.3 Operating Modes

The inverter supports various operating modes, including a batteryless mode. In batteryless mode, the inverter can power connected loads directly from the PV array or the AC grid without requiring a battery connection. This is useful for grid-tied systems or for reducing battery dependency.

Diagram illustrating the inverter's batteryless mode, powering loads from PV/AC grid without a battery.
Figure 6: Batteryless Mode. The inverter can power loads directly from the PV array or AC grid, even without a battery connected.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your inverter. Always disconnect all power sources before performing any maintenance.

  • Cleaning: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris.
  • Connections: Check all electrical connections regularly for tightness and signs of corrosion.
  • Environment: Ensure the installation environment remains within the specified temperature and humidity ranges.
  • Battery Inspection: If using batteries, follow the battery manufacturer's maintenance guidelines.

6. Troubleshooting

If the inverter is not functioning as expected, refer to the following basic troubleshooting steps. For complex issues, contact technical support.

  • No Power Output: Check all circuit breakers (PV, battery, AC input/output). Ensure battery voltage is within the operating range.
  • Error Codes: Note any error codes displayed on the LCD screen and consult the full manual for their meaning.
  • Overload: If an overload warning appears, reduce the connected load.
  • Overheating: Ensure proper ventilation and that the ambient temperature is within the operating limits.

7. Specifications

Feature Specification
Model NumberPOW-SunSmart SP5.2K
Brand NamePowMr
Item5.2KW split-phase inversor
TypeMPPT solar inverter
Output TypeSINGLE
Rated Input Voltage110/120Vac
Rated Output Voltage120Vac (100/105/110Vac Settable)
Output Frequency50Hz/ 60Hz
WaveformPure sine wave
Rated Battery Input Voltage48V (Minimum starting voltage 44V)
Battery TypeLead acid or lithium battery
Maximum PV Open Circuit Voltage500Vdc
Maximum PV Input Power6000W
Is Smart DeviceYes
Operating Temperature-35°C ~ 45°C
Enclosure Dimensions (Including Terminal Height)385 × 300 × 170mm
Net Weight4kg
Package Dimensions (L x W x H)48cm x 35cm x 23cm
Package Weight15.0kg
CertificationCE

8. User Tips

  • Battery Compatibility: This inverter is confirmed to support LiFePo4 batteries, in addition to AGM, GEL, and Flooded types.
  • Expandability: For higher power requirements, the inverter supports parallel connection of up to 6 units. This is ideal for expanding your solar system's capacity.
  • Lithium Battery Activation: If using lithium batteries, utilize the dual activation function via mains or PV power to wake up sleeping batteries.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your authorized dealer or the manufacturer directly. Keep your purchase receipt and product serial number handy when contacting support.

For the most up-to-date information and detailed troubleshooting guides, please refer to the official product page or contact customer service.

10. Applications

The PowMr 5.2KW Hybrid Solar Inverter is versatile and suitable for a variety of applications, including:

  • RV (Recreational Vehicle) Systems: Providing reliable power on the go.
  • Home Storage: Integrating with residential solar setups for energy independence.
  • Camping: Powering essential devices in off-grid camping scenarios.
  • General Solar Power Systems: A core component for various solar energy installations.
Four images showing the inverter used in different applications: RV, Home Storage, Camping, and a general Solar Power System.
Figure 7: Diverse Applications of the PowMr Hybrid Solar Inverter, including RVs, home energy storage, camping, and comprehensive solar power systems.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.