KEVANLY H1, H7, H11, H8, H9, 9006, HB4

Contents

KEVANLY LED Car Headlight Instruction Manual

Model Compatibility: H1, H7, H11, H8, H9, 9006, HB4

Brand: KEVANLY

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your KEVANLY LED Car Headlights. Please read this manual thoroughly before use and retain it for future reference.

Two LED car headlight bulbs illuminating a dark road.
Two LED car headlight bulbs illuminating a dark road, demonstrating their powerful light output.

2. Safety Warnings

2.1 General Safety Warning

  • This product contains small parts. Keep out of reach of children under three years old to prevent accidental ingestion/choking hazards.
  • Read the manual carefully before installation/use. Non-professionals should have a technician perform the operation.
  • Compatible only with specified vehicle models/voltage specifications. Illegal modifications or mixing of parts are strictly prohibited.
  • Product contains electrical/metal components. Avoid exposure to water or direct sunlight to prevent short circuits/corrosion.
  • Do not forcibly disassemble or drop the product. Disassembly voids warranty and creates safety hazards.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture (though product is IP68 rated, avoid unnecessary exposure).
  • Handle with care to avoid cuts or injuries.

2.2 Operational Safety Warning

  • Install/remove only after the vehicle engine is off and power is disconnected to prevent electrical shorts and burns.
  • Verify all accessories are securely fastened before driving to avoid detachment during motion causing accidents.
  • Do not touch hot components (lights/metal parts) after operation to prevent burns.
  • Keep fragrance/liquid accessories away from children. If accidentally contacted with skin or eyes, rinse immediately with clean water.

3. Product Specifications

Feature Specification
PurposeLED Headlight / LED Fog Lamp
VoltageDC 12-16V
Working Temperature-40°C to +80°C
Waterproof RatingIP67
Color Temperature6000K (White)
Interface ReferenceH1, H7, H11, H8, H9, 9006, HB4
MaterialElectroplated Aviation Aluminum Lamp Body + Red Copper
FeaturesDouble-sided large wick, wireless direct plug, intelligent constant current, heat dissipation breakthrough
Luminous Flux32800LM
Peak Power90W
Lamp CoreCSP LED
Lifespan100,000 hours
Car Brand CompatibilityGeneral Motors (excluding BMW, Audi, Mercedes Benz series)
Car Model CompatibilityUniversal
CertificationCE
OriginMainland China
Product parameters table for LED headlights, showing luminous flux, power, lamp core type, color temperature, and lifespan, with a diagram of an H11 H8 H9 bulb.
Detailed product parameters and an illustration of an H11 H8 H9 bulb type.
Detailed diagram of LED headlight features including lamp beads, decoding chip, aluminum body, wireless plug-and-play, and a table of dimensions for H1, H4, H7, H11, 9005/9006, 880/881 models.
Comprehensive overview of LED headlight features and a table with dimensions for various compatible models (H1, H4, H7, H11, 9005/9006, 880/881).

4. Package Contents

Your package should contain the following items:

  • 2 x KEVANLY LED Headlight Bulbs (specified model type)
  • 1 x Instruction Manual

Please inspect all components upon receipt. If any items are missing or damaged, contact customer support immediately.

5. Installation

Important: Ensure the vehicle engine is off and the power is disconnected before beginning installation to prevent electrical shorts and burns. Non-professionals should seek assistance from a qualified technician.

  1. Identify the correct headlight bulb type for your vehicle (e.g., H1, H7, H11, 9006, HB4). Refer to your vehicle's owner's manual or the product specifications.
  2. Locate the existing headlight assembly in your vehicle.
  3. Carefully remove the old halogen bulb. This may involve twisting or unclipping a retaining mechanism.
  4. Insert the KEVANLY LED headlight bulb into the housing. Ensure it is seated correctly and securely. The wireless direct plug design allows for easy, plug-and-play installation without needing to change lines.
  5. Secure the LED bulb with any retaining clips or mechanisms that were present for the original bulb.
  6. Connect the LED bulb's connector to the vehicle's wiring harness.
  7. Repeat the process for the other headlight.
  8. After installation, verify all accessories are securely fastened before driving to avoid detachment during motion.
LED headlight bulb on a circuit board, emphasizing stable decoding and no fault lights after installation.
The intelligent decoding chip ensures stable operation and prevents fault lights after installation.
Diagram showing 360-degree light self-adjustment capability of the LED headlight.
The 360° light self-adjustment feature allows for optimal beam pattern alignment.

6. Operation

Once installed, your KEVANLY LED headlights operate like your vehicle's original headlights. Turn on your vehicle's lights to activate the LED headlights. The 6000K white light provides a bright and clear illumination for improved visibility.

The headlights feature a 20 times brighter boost with 32800 lumens, ensuring excellent visibility during nighttime driving. The advanced design provides a strong focus and wide field of view for high beam, and a strong spotlight with good paving effect for low beam.

Video demonstrating the powerful illumination and beam patterns (low and high beam) of the LED car headlights during nighttime driving.

7. Maintenance

  • Regularly check the headlights for any dirt or debris accumulation. Clean the lens with a soft, damp cloth. Avoid abrasive cleaners.
  • Periodically inspect the wiring connections to ensure they remain secure.
  • The LED bulbs are designed for a long lifespan (up to 100,000 hours) and generally do not require frequent replacement.
  • Do not attempt to disassemble the LED bulbs, as this will void the warranty and may cause damage.
LED headlight bulb submerged in ice, demonstrating its IP68 waterproof and dustproof rating.
The IP68 waterproof and dustproof rating ensures durability in various weather conditions.
Diagram illustrating the efficient heat conduction and fin cooling technology of the LED headlight.
Efficient heat conduction and fin cooling technology help maintain optimal operating temperature and extend lifespan.

8. Troubleshooting

If you encounter issues with your LED headlights, consider the following:

  • Lights not turning on: Check all connections to ensure they are secure. Verify that the vehicle's power supply is functioning correctly.
  • Flickering lights: This could indicate an unstable power supply or a compatibility issue. Ensure the voltage is within the specified DC 12-16V range.
  • Fault light on dashboard: While the product features stable decoding, some sensitive vehicle systems might still trigger a warning. Ensure the bulb type is correctly matched to your vehicle.
  • Dimming or inconsistent brightness: Check for proper seating of the bulb and secure electrical connections.

If problems persist after checking these points, please contact customer support for further assistance.

9. User Tips

  • Always double-check your vehicle's bulb type before purchasing to ensure compatibility.
  • For optimal beam pattern, ensure the LED chip faces horizontally (left and right) when installed in the housing.
  • Consider testing the lights before fully reassembling the headlight housing to confirm proper function.

10. Compliance Information

This product complies with EU RoHS and REACH environmental directives. The LED light source and materials meet EU road traffic safety warning product standards, making it suitable for road use scenarios in the EU market.

Installation and use must comply with local EU traffic regulations. Illegal modifications that compromise driving safety are prohibited.

This product is an auxiliary accessory and cannot replace the vehicle's original core safety components.

The manufacturer assumes no liability for vehicle damage or traffic accidents resulting from improper installation or misuse.

LED bulb with '20 Times Brighter Boost' and 'Wireless and Easy to Install' text.

The product is designed for wireless and easy installation.

11. Manufacturer & EU Representative Information

  • Manufacturer: Guangzhou Kejie Trading Co. Room 302, No.10, Ou Gang North Street, Ke Mu Long West Road, Tianhe District, Guangzhou City, Guangdong Province, China, kejiezy@163.com
  • EU Authorized Representative: SUCCESS COURIER SL, Calle de RIO TORMES 13A, office 1, Fuenlabrada, Madrid, 28947 Spain, successservice2@hotmail.com
  • Importer: Guangzhou Kejie Trading Co. Room 302, No.10, Ou Gang North Street, Ke Mu Long West Road, Tianhe District, Guangzhou City, Guangdong Province, China

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.