1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your KAIRUIANG Luxury Crystal Ceiling Light. Please read this manual thoroughly before installation and keep it for future reference.
2. Safety Instructions
- Installation, inspection, and maintenance must be performed by professional electricians to ensure safety and prevent damage or hazards.
- Use the lamp only within its rated voltage range (220V).
- Clean the fixture with a clean, soft, dry cotton cloth only. Do not use liquids, as they may cause discoloration or damage.
- Do not modify or replace any electronic components inside the lamp; doing so may damage the lamp.
- WARNING: Risk of electric shock. Do not use in wet locations.
- WARNING: Risk of fire. Do not cover the lamp or use non-compliant power adapters. Do not overload the socket.
- Not suitable for children under 3 years. Small parts (e.g., bulbs) may cause a choking hazard. Keep out of reach of children.
- This lamp is for indoor use only. Do not expose to rain or moisture.
- Do not use with dimmers not specified in this manual.
- Always disconnect the power supply before attempting any installation, maintenance, or bulb replacement.
3. Package Contents
Please check that all components are present and undamaged:
- Crystal Ceiling Light Fixture
- Hanging Plate / Mounting Bracket
- Gasket and Self-tapping Screws
- Flathead Screws
- User Manual (this document)
4. Setup and Installation
Before installation, ensure the power supply is turned off at the main circuit breaker.
Fixture Connection Steps (Example)
- Remove the small screw on the top and bottom of the fixture to separate the lamp body from the hanging plate.
- Align the screw hole on the hanging plate with the hole made in the wall/ceiling. Fix it securely using the gasket and self-tapping screws.
- Connect the electrical wires (note: positive to positive, negative to negative). Ensure connections are secure.
- Align the lamp body with the hanging plate and fix it with flathead screws.
- (If applicable) Insert the plug into the socket and turn on the switch to light up the lamps.
- Tear off any protective film from the fixture.
- Finally, install the lampshade (if separate) and light source (if not integrated).

Figure 1: Internal view of the high-quality LED light source. Ensure proper wiring during installation.
5. Operating Instructions
This ceiling light features multiple color temperature settings to suit various moods and activities.
Switching Light Effects
The light fixture supports different color temperatures (White, Neutral, Warm) which can typically be cycled through using your standard wall switch (on/off/on sequence). Refer to the diagram below for visual representation of the light effects.

Figure 2: Three distinct light effects can be switched to meet various scene requirements: 6000K Warm Light, 4500K Warm Light, and 3000K Warm Light.
6. Maintenance
To ensure the longevity and appearance of your crystal ceiling light:
- Cleaning: Use only a clean, soft, dry cotton cloth to wipe the fixture. Do not use any liquids, abrasive cleaners, or chemical solvents, as these can damage the finish and crystal components.
- Crystal Care: The premium K9 crystal is designed for high light transmittance and is easy to clean. Gently wipe crystals with a dry cloth to remove dust.
- Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
7. Troubleshooting
If you encounter issues with your ceiling light, try the following:
- Light does not turn on:
- Check if the power switch is in the "ON" position.
- Verify that the circuit breaker for the light fixture is not tripped.
- Ensure all wiring connections are secure and correct (consult a qualified electrician if unsure).
- Confirm the lamp is receiving the correct voltage.
- Light flickers:
- Check for loose wiring connections.
- Ensure the voltage supply is stable.
- Avoid using incompatible dimmers.
If problems persist, please contact customer support.
8. Specifications

Figure 3: Dimensional diagram showing Height: 6cm, Diameter: 40cm.
| Feature | Specification |
|---|---|
| Brand Name | KAIRUIANG |
| Item Type | Ceiling Lights |
| Style | Modern Style |
| Body Material | CRYSTAL (K9 Crystal) & Stainless Steel |
| Light Source | LED bulbs (Integrated) |
| Wattage | 48W |
| Luminous Flux | 2000-82000 Lumens |
| Voltage | 220 V |
| Power Source | AC |
| Installation Method | Surface mounted, self-contained |
| Is Dimmable | No (Refers to continuous dimming; color temperature is switchable) |
| Is Smart Device | No |
| Applicable Area | 10~13 m² |
| Dimensions | Diameter: 40cm, Height: 6cm |
| Use | Daily Lighting (Bedroom, Study, Living Room, Balcony) |
| Certification | CE |
| Origin | Mainland China |
9. User Tips
No specific user tips are available at this time due to the absence of buyer reviews or Q&A data.
10. Warranty and Support
For any warranty claims, technical support, or inquiries regarding your KAIRUIANG Luxury Crystal Ceiling Light, please contact the seller directly through your purchase platform. Please have your order details ready when contacting support.
Applicable Regulations and Harmonized Standards References:
- Low Voltage Directive 2014/35/EU
- Electromagnetic Compatibility Directive 2014/30/EU
- Restriction of the use of certain hazardous substances (RoHS) Directive 2011/65/EU