1. Introduction
Thank you for purchasing a GODOX product. The TT600 camera flash utilizes the Godox wireless X system and 2.4G ratio transmission, making it compatible with various Godox wireless control systems such as AD360II-C/AD360II-N, TT685C/TT685N, and X1T-C/X1T-N triggers. It is designed to fit most DSLR camera brands with a standard hot shoe, including Canon, Nikon, Pentax, Olympus, Fujifilm, and Sony.
Key Features:
- High Guide Number: GN60 (m ISO 100, @200mm) with power adjustable from 1/1 to 1/128 in 1/3rd stop increments.
- Built-in 2.4G Wireless Transmission: Supports both transmitting and receiving functions for stable output and creative lighting effects over distances up to 100 meters.
- Advanced Functions: Includes high-speed sync (HSS), wireless remote control, multi-flash (stroboscopic) mode, and manual focus assist.
- Consistent Performance: Offers stable consistency and color temperature (5600K ± 200K) for even lighting.
- User-Friendly Interface: Features a large LCD display and a clear control panel for convenient operation.
2. Safety Information
Please read and understand all safety precautions before using this product.
- Always keep this product dry. Do not use in rain or damp conditions.
- Do not disassemble the unit. Repairs should only be performed by an authorized maintenance center.
- Keep out of reach of children.
- Stop using the product if it breaks open due to extrusion, falling, or strong impact. Electric shock may occur if internal electronic parts are touched.
- Do not fire the flash directly into the eyes (especially those of babies) within short distances, as this may cause visual impairment.
- Do not use the flash unit in the presence of flammable gases, chemicals, or other similar materials. These materials may be sensitive to strong light, potentially causing fire or electromagnetic interference.
- Do not leave or store the flash unit if the ambient temperature exceeds 50°C, as this may damage electronic parts.
- Turn off the flash unit immediately in the event of malfunction.
3. Name of Parts
3.1. Body
- Catchlight Panel
- Built-In Wide Panel (Retracted)
- Flash Head
- Optic Control Sensor
- Focus Assist Beam
- Wireless Control Port
- Sync Cord Jack
- Hotshoe
- Lock Ring
- Battery Compartment
3.2. Control Panel
- MODE Mode Selection Button / Wireless Mode Selection (Long Keypress)
- ZOOM/Fn Zoom / Function Custom Button (Long Keypress)
- GR/CH Group / Channel Setting (Long Keypress)
- Select Dial
- SET Set Button
- ON/OFF Power Switch
- Test Button / Flash Ready Indicator
- Focus Assist Beam / High Speed Sync Button (Long Keypress)
3.3. LCD Panel Indications
- M: Manual Flash Mode
- S1: S1 Slave Flash Triggering
- S2: S2 Slave Flash Triggering
- Multi: Multi/Stroboscopic Flash Mode
- H: High Speed Sync Triggering
- Battery Level Indication
- Sound Beep Indication
- Zz: Sleep Status
- Overtemperature Indication
- Wireless Signal Transmission
- Focus Assist Beam Indicator
- Channel
- Group

4. What's in the Box
- Flash unit (TT600) x1
- Mini stand x1
- Protection bag x1
- Instruction manual x1
- Packing box x1

5. Setup
5.1. Battery Installation
The TT600 flash unit requires four AA batteries for operation. Ni-MH batteries are recommended for optimal performance and recycle times. Alkaline batteries can also be used.
- Open the battery compartment cover located on the side of the flash unit.
- Insert four AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.

Video: Battery Installation and Basic Operation
This video demonstrates how to install batteries and perform basic operations like power on/off and mode selection.
5.2. Attaching to a Camera
- Slip the camera flash's mounting foot into the camera's hotshoe all the way.
- Rotate the locking screw on the mounting foot until it locks up, securing the flash.
- To detach, rotate the locking screw on the mounting foot until it is loosened, then slide the flash off.

6. Operating the Flash
6.1. Power Management
Use the ON/OFF Power Switch (16) to turn the flash unit on or off. If the flash unit will not be used for an extended period, turn it off to conserve battery life. The TT600 features a Sleep Function to automatically enter sleep status after a period of inactivity. Refer to the 'Custom Function - Sleep Function' section for details on setting the idle time.
6.2. Flash Output (Power Selection)
The flash output can be adjusted from 1/128th power to 1/1 full power in 1/3 stop increments. Rotate the Select Dial (14) to change the power output. A hand-held flash meter can be used to determine the required flash output for correct exposure.
6.3. ZOOM: Setting the Flash Coverage
The flash coverage can be set to match the lens focal length, ranging from 24mm to 200mm. Press the ZOOM/Fn button (12) and rotate the Select Dial (14) to adjust the flash coverage. Ensure the flash coverage matches or exceeds your lens focal length to avoid dark peripheries in your photos.
6.4. M Mode (Manual Flash Mode)
Press the MODE button (11) to enter M mode. In this mode, you can set the flash unit onto your camera's hot shoe or a trigger's hot shoe. Adjust the flash power output before shooting. The flash will fire synchronously when the camera's shutter is pressed. Slave triggering mode is not available in M mode.
6.5. Multi Mode (Stroboscopic Flash)
Press the MODE button (11) to enter Multi mode. This mode fires a rapid series of flashes to capture multiple images of a moving subject in a single photograph. You can set the firing frequency (Hz), the number of flashes, and the flash output. During stroboscopic flash, the shutter remains open until the firing stops. The required shutter speed can be calculated as: Number of flashes / Firing frequency = Shutter speed.
Note:
- Stroboscopic flash is most effective with a highly reflective subject against a dark background.
- Using a tripod and a remote switch is recommended.
- A flash output of 1/1 or 1/2 cannot be set for stroboscopic flash.
- Stroboscopic flash can be used with "buLb" mode.
- To prevent overheating, do not use stroboscopic flash more than 10 times in succession.
6.6. S1 Mode (S1 Slave Triggering Mode)
Long press the ZOOM/Fn button (12) for 2 seconds to enter the custom menu, then press the SET button (15) to choose OS. Rotate the Select Dial (14) to select S1. In S1 mode, the flash unit functions as a slave flash in a manual flash environment, firing synchronously with the master flash's first flash.
6.7. S2 Mode (S2 Slave Triggering Mode)
Similar to S1 mode, long press the ZOOM/Fn button (12) for 2 seconds, then press SET (15) to choose OS, and rotate the Select Dial (14) to select S2. In S2 mode, the flash unit functions as a slave flash in a TTL flash environment. It ignores the master flash's single preflash and fires only in response to the second, actual flash from the master.
6.8. Hi-Speed Sync Triggering (HSS)
Long press the Focus Assist Beam / High Speed Sync Button (18) for 2 seconds to enter HSS mode. This mode allows the flash unit to synchronize with all camera shutter speeds, up to 1/8000s (depending on the camera). This is useful for fill-flash portraits with wide apertures.
Note:
- HSS is effective only when the flash unit is used with specific flash triggers, such as Godox Cells II transceiver or X1C/X1N TTL wireless triggers (sold separately).
- HSS is NOT available when the TT600 is mounted directly onto the camera's hot shoe.
- To avoid overheating during continuous HSS, the over-temperature protection function will activate after 10 continuous high-speed flashes, increasing the recycling time to 10 seconds.
6.9. Custom Function - Focus Assist Lamp
In low-light or low-contrast conditions, press the Focus Assist Beam / High Speed Sync Button (18) to turn on the focus assist beam, aiding autofocus. The beam will automatically turn off after a set period (No-Flash Time) after the last flash. You can adjust the No-Flash Time (10, 20, or 30 seconds) via the custom function menu (long press ZOOM/Fn button, then SET, rotate Select Dial).
6.10. Buzz Function
To turn the beep sound on or off, long press the ZOOM/Fn button (12) for 2 seconds to enter the custom function menu, then press SET (15) to enter "bp" mode. Rotate the Select Dial (14) to choose ON or OF. When ON, the sound beep icon will be shown on the LCD display.
6.11. Wireless Flash Shooting (2.4G Transmission)
The TT600 features built-in 2.4G wireless transmission, allowing it to function as both a master and slave unit. It is compatible with Godox AD360II-C/N, TT685C/N, and X1T-C/N wireless control systems.
- Wireless Mode Setting: Long press the MODE button (11) for 2 seconds until the wireless icon blinks. Rotate the Select Dial (14) to set OFF/Master(M)/Slave(S) mode.
- Channel Setting: Long press the GR/CH button (13) for 2 seconds until the channel figure blinks. Rotate the Select Dial (14) to choose a channel from 1 to 32.
- Group Setting: Short press the GR/CH button (13) to select a group. In Master mode, groups M/A/B/C/D/E can be selected. In Slave mode, groups A/B/C/D/E can be selected.

6.12. Wireless Control Function
The flash unit has a Wireless Control Port (6). By inserting the receive end of a Godox FT series remote control set into this port and the transmit end into your camera's hot shoe, you can wirelessly adjust power levels, control the focus assist beam and buzzer, and trigger the flash. Settings made on the hotshoe-mounted transmit unit will be communicated to the flash.
6.13. Sync Triggering
The Sync Cord Jack (7) is a 3.5mm plug. Insert a trigger plug here to fire the flash synchronously with the camera shutter.
6.14. Custom Function - Sleep Function
The flash unit is equipped with a Sleep Function to prevent battery drain during idle periods. Long press the ZOOM/Fn button (12) for 2 seconds to enter the sleep function mode. The LCD panel will display "SL" (Sleep) and "Sleeping Time". The idle time before entering sleep mode can be set to 3, 10, 30, or 60 minutes, or turned OFF. To wake up the flash unit, press any button on the flash, the camera release button, or the trigger TEST button.
Note: It is recommended to set a short idle time for the Sleep Function to ensure longer battery life.
6.15. C.Fn Setting Custom Functions
The TT600 allows customization of various functions. To access the custom function settings, long press the ZOOM/Fn button (12) for 2 seconds. Use the SET button (15) to navigate through the functions and the Select Dial (14) to adjust values. Press the ZOOM/Fn button (12) again to exit.
| Symbol | Function | Settings & Description |
|---|---|---|
| SL | Sleeping Time Setting | 3, 10, 30, 60 minutes, OFF |
| FC | Focus Assist Lamp Auto Power OFF Time | 10, 20, 30 seconds |
| bp | Buzz Setting | ON / OFF |
| bL | Backlight Setting | ON (Always lighting), 12 (Off in 12 sec.), OFF (Off) |
| OS | Optic Slave Mode | OFF, S1 Mode, S2 Mode |
6.16. Bounce Flash
By pointing the flash head toward a wall or ceiling, the flash will bounce off the surface before illuminating the subject. This softens shadows for a more natural-looking shot. The flash head can be rotated vertically from -7° to 90° and horizontally from 0° to 360°.
Note:
- If the wall or ceiling is too far away, the bounced flash might be too weak, resulting in underexposure.
- The bounce surface should be plain and white for high reflectance. If the surface is not white, a color cast may appear in the picture.

6.17. Creating a Catchlight
The built-in catchlight panel can be used to create a catchlight in the subject's eyes, adding life to facial expressions.
- Point the flash head upward by 90°.
- Pull out the wide panel. The catchlight panel will come out at the same time.
- Push the wide panel back in, ensuring only the wide panel is pushed in.
Note:
- Point the flash head straight ahead and then upward by 90°. The catchlight will not appear if you swing the flash head left or right.
- For the best catchlight effect, maintain a distance of 1.5m/4.9ft from the subject.

6.18. Using the Wide Panel
Pull out the built-in wide panel to enlarge the flash lighting range, providing a more softened and natural lighting effect. When pulled out, the flash coverage will be extended to 14mm. The catchlight panel will also come out at the same time; push it back in if not needed.

7. Troubleshooting (Protection Function)
The system provides real-time protection to secure the device and your safety. The following lists prompts for your reference:
7.1. Over-Temperature Protection
To prevent overheating and damage to the flash head, do not fire more than 30 continuous flashes at 1/1 full power. After 30 continuous flashes, allow a rest time of at least 10 minutes. If you exceed this, the internal over-temperature protection function may activate, increasing the recycling time to 10-15 seconds. If this occurs, allow a rest time of about 10 minutes for the flash unit to return to normal. When activated, the over-temperature icon will be shown on the LCD display.
Number of Flashes that will activate over-temperature protection:
| Power Output Level | Number of Flashes (Normal Mode) | Number of Flashes (High-Speed Sync Mode) |
|---|---|---|
| 1/1 | 30 | 15 |
| 1/2 +0.7 | 40 | 20 |
| 1/2 +0.3 | 50 | |
| 1/2 | 60 | |
| 1/4 (+0.3,+0.7) | 100 | 30 |
| 1/8 (+0.3,+0.7) | 200 | |
| 1/16 (+0.3,+0.7) | 300 | 40 |
| 1/32 (+0.3,+0.7) | 500 | |
| 1/64 (+0.3,+0.7) | 1000 | 50 |
| 1/128 (+0.3,+0.7) |
7.2. Other Protections (Error Codes)
| Prompts on LCD Panel | Meaning |
|---|---|
| E0 | A failure occurs on the temperature sensor. Send to maintenance center. |
| E1 | A failure occurs on the recycling system, preventing the flash from firing. Restart the flash unit. If the problem persists, send to maintenance center. |
| E2 | The system is experiencing excessive heat. Allow a rest time of 10 minutes. |
| E3 | The voltage on two outlets of the flash tube is too high. Send to maintenance center. |
8. Specifications (Technical Data)
| Feature | Specification |
|---|---|
| Product Model | TT600 |
| Guide No. (1/1 power @ 200mm) | GN 60 (m ISO 100) |
| Vertical Rotation Angle | -7° to 90° |
| Horizontal Rotation Angle | 0° to 360° |
| Power Supply | Ni-MH batteries (recommended) or 4*LR6 alkaline batteries |
| Full Power Flashes | Approx. 230 (2500mA Ni-MH batteries) |
| Recycle Time | Approx. 0.1-2.6 seconds (eneloop Ni-MH batteries of Panasonic). Red LED indicator lights when flash is ready. |
| Flash Duration | 1/300s – 1/20000s |
| Color Temperature | 5600K ± 200K |
| Wireless Flash Function | Master, Slave, Off |
| Controllable Slave Groups | 5 (A, B, C, D, E) |
| Transmission Range (approx.) | 100m |
| Channel | 1-32 |
| Dimension | 64mm * 76mm * 190mm |
| Weight without Battery | 400g |
| Weight with Battery | 500g |
| 2.4G Frequency Range | 2413.0MHz-2465.0MHz |
| Max. Transmitting Power | 5dbm |

9. Maintenance
- If abnormal operation is detected, immediately shut down the device and identify the cause.
- Avoid sudden impacts and regularly dedust the lamp.
- It is normal for the flash tube to become warm during use. Avoid continuous flashes if unnecessary.
- Maintenance of the flash must be performed by our authorized maintenance department, which can provide original accessories.
- This product, excluding consumables like the flash tube, is supported with a one-year warranty.
- Unauthorized service will void the warranty.
- If the product has failures or was wetted, do not use it until it is repaired by professionals.
- Changes made to the specifications or designs may not be reflected in this manual.
10. User Tips
- For battery usage, alkaline batteries are generally recommended for best fit, as some rechargeable AA batteries might be too thick and get stuck.
- The Godox TT600 offers great value for money and is ideal for beginners in photography looking for an external flash.
11. Frequently Asked Questions (FAQ)
Q: Is the Godox TT600 universal, meaning compatible with Canon and Nikon, or do I need to select a specific option?
A: The Godox TT600 is designed to be universal and compatible with most DSLR cameras that have a standard hot shoe, including Canon, Nikon, Pentax, Olympus, Fujifilm, and Panasonic. You do not need to select a specific option for basic compatibility. However, for advanced features like High-Speed Sync (HSS) or TTL functionality, you would need a compatible Godox wireless trigger (e.g., X1T-C for Canon, X1T-N for Nikon) specific to your camera brand.
Q: Is it compatible with the Canon T7?
A: Yes, the Godox TT600 is compatible with the Canon T7, as the Canon T7 features a standard hot shoe.
Q: Does it come with a transmitter to use the flash off-camera?
A: The Godox TT600 itself does not come with a separate transmitter. It has a built-in 2.4G wireless receiver, allowing it to be triggered wirelessly. To use it off-camera with remote control and advanced features like HSS, you would need to purchase a separate Godox wireless trigger (e.g., Godox X1T-C/N or Cells II) compatible with your camera system.