1. Safety Instructions
Please read this user manual carefully and save it for future reference. Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.
- Avoid dropping the device.
- Do not disassemble the device.
- Do not submerge the device in water.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Use original or certified cables.
- Do not place dangerous items on top of this device (e.g., liquid filled objects, lit candles).
- Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
- To avoid hearing damage, do not listen for extended periods at high volume.
- Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
- The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
- The adapter should be installed near the device and should be easily accessible.
- Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.
2. Accessories List
Ensure all the following items are included in your package:
- Power Adaptor (x1)
- Subwoofer Power Cable (x1)
- Stereo 3.5mm to RCA Audio Cable (x1)
- Front Left Surround Cable (3m) (x1)
- Front Right Surround Cable (3m) (x1)
- Rear Left Surround Cable (6m) (x1)
- Rear Right Surround Cable (6m) (x1)
- HDMI Cable (x1)
- Digital Optical Cable (x1)
- Remote Control (x1)
- Wall Mounted Kit (x1)
- Wall Bracket (x1)
- Mounting Screw on Speakers (x6)
- User Manual (x1)
3. Setup and Installation
3.1 Soundbar Controls
The soundbar features a control panel for basic operations:
- Power Button: Press to power on/off.
- Source Button: Press to switch input channels (ARC-OPT(OPTICAL)-BT-AUX-USB).
- Bluetooth Button: Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually.
- Volume Down (-): Decrease volume.
- Volume Up (+): Increase volume.
3.2 Remote Control Functions
The remote control provides comprehensive control over the soundbar system:
| Button | Function |
|---|---|
| Power | Power on/off. |
| Source | Switch channels: ARC-OPT(OPTICAL)-BT-AUX-USB. |
| ARC | Switch to HDMI ARC channel. |
| OPT | Switch to OPTICAL channel. |
| AUX | Switch to AUX channel. |
| BT | Switch to BLUETOOTH channel. |
| USB | Switch to USB channel. |
| SUB PAIR | Hold for 3 seconds to put the Soundbar in pairing mode with the subwoofer. |
| USB REPEAT | USB Mode: Switch between single loop playback and list loop playback. |
| Volume Up (+) | Increase volume. |
| Volume Down (-) | Decrease volume. |
| Previous (<) | For BT and USB mode only: Skip to previous track. |
| Next (>) | For BT and USB mode only: Skip to next track. |
| Play / Pause (▶▶) | For BT and USB mode only. |
| MUTE | Mute/unmute audio. |
| LED DIMMER | Adjust display brightness in 5 levels. Hold for 3s to turn off the LED display. |
| BASS MX | Adjust bass level (display shows 'B5-6' to 'B5 6'). |
| MIDRANGE | Adjust alto level (display shows 'MR-6' to 'MR 6'). |
| TREBLE | Adjust treble level (display shows 'TB-6' to 'TB 6'). |
| MOVIE | Switch to MOVIE mode (display shows 'MOVI'). |
| MUSIC | Switch to MUSIC mode (display shows 'MUSC'). |
| VOICE | Switch to VOICE mode (display shows 'VOIC'). |
| SPORT | Switch to SPORT mode (display shows 'SPRT'). |
| GAME | Switch to GAME mode (display shows 'GAME'). |
| NIGHT | Switch to NIGHT mode (display shows 'NIGT'). |
| SURROUND | Adjust surround sound level (display shows 'SR-6' to 'SR 6'). |
| PROMPT TONE | Adjust prompt tone level (display shows 'PT 0' to 'PT 3'). |
3.3 Connecting to TV via HDMI ARC
- Connect one end of the HDMI cable to the eARC/ARC port on your TV.
- Connect the other end to the ARC port of the soundbar.
- Press the "ARC" button on the remote control to select "ARC" input.
Note: Please turn on the "CEC" function on your TV. When ARC is connected, your TV remote control can control the soundbar and TV simultaneously (turn on/off, adjust volume). If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM.
3.4 Connecting to TV via Optical / AUX
Option 1: Optical
- Make sure the TV's port is OPTICAL OUT, connect both sides of the cable to OPTICAL, for both the TV and the soundbar.
- Make sure the optical plug is inserted correctly as shown in the picture. Do not insert the plug upside down and break the optical.
Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume. In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM.
Option 2: AUX
- Connect the 3.5mm to RCA audio cable to connect to your TV's RCA AUDIO OUT port.
- Make sure the color of the cable ends matches the color of the TV ports.
Note: Please remember to unplug the AUX cable from TV and Soundbar when you want to switch other mode.
3.5 Connecting to Bluetooth®
- Press the "BT" button on the soundbar or remote control to enter Bluetooth pairing mode.
- Open your phone's Bluetooth settings, find and select "Poseidon D70" to connect the soundbar.
Note: If it's already in the Bluetooth mode and connected, press and hold the "BT" button for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone/PC/TV.
3.6 Connecting Surround Speakers to Soundbar and Subwoofer
- Use the Front Surround Cables (FL & FR) to connect the soundbar and surround speakers. Match the same color interfaces and place speakers accordingly.
- Use the Rear Surround Cables (SL & SR) to connect the subwoofer and surround speakers. Match the same color interfaces and place speakers accordingly.
Note: When facing the front of the soundbar, the two right surround satellite speakers will have red interfaces, while the two left surround satellite speakers will have white interfaces. Ensure correct positioning for optimal audio experience.
3.7 Pairing Subwoofer
The subwoofer is factory-paired with the soundbar. If there is no sound from the subwoofer, re-pairing is required:
- Press and hold the "SUB PAIR" button on the remote control for 3 seconds. The display will show "SUB" flashing.
- Press and hold the ON/OFF button on the subwoofer for 5 seconds. The white LED will flash fast. The white LED will be continuously on when the subwoofer is successfully paired.
3.8 Placement Recommendation
For a better listening experience, lay out the entire system for full 360° surround sound as shown in the diagram below:
Diagram illustrating the optimal placement of the soundbar, subwoofer, and four surround speakers around a listening area for an immersive audio experience.
3.9 Wall Mount Installation
The wall mount bracket used for the surround speakers is identical to that of the soundbar, so the vertical hole spacing and installation method are the same.
Illustrations showing the steps for wall mounting the soundbar and individual surround speakers, including measurements for screw placement.
4. Operating the System
Once the system is set up, you can operate it using the soundbar controls, the remote control, or the ULTIMEA app.
4.1 App Control
The ULTIMEA app allows for intelligent control, including 121 preset EQ matrices, power on/off, input source selection, and OTA support.
A smartphone displaying the ULTIMEA app, which provides comprehensive control over the Poseidon D70 sound system, including equalization, power, and input source selection.
You can download the "ULTIMEA" app from Google Play or Apple Store.
4.2 Sound Modes and Adjustments
Use the remote control to select various listening modes and fine-tune your audio experience:
- Listening Modes (EQ): Movie, Music, Voice, Sport, Game, Night.
- Sound Adjustments: Independently adjust Bass (BASS MX), Midrange, Treble, and Surround sound levels.
- LED Dimmer: Adjust the display brightness in 5 levels or turn it off.
- Prompt Tone: Adjust the level of system prompt tones.
5. Maintenance
To ensure the longevity and optimal performance of your ULTIMEA Poseidon D70 system, follow these simple maintenance guidelines:
- Cleaning: Clean the device with a dry, soft, lint-free cloth. Do not use any corrosive cleaner or oil, as these can damage the finish or internal components.
- Storage: When not in use for extended periods, store the system in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Ensure all cables are connected properly and are not bent or pinched, which can cause damage over time.
6. Troubleshooting
If you encounter issues with your ULTIMEA Poseidon D70, refer to the following common solutions:
- No Sound from TV (HDMI ARC/Optical): Ensure the TV's "CEC" function is enabled (for HDMI ARC) and try setting the TV's audio output to PCM. Check all cable connections.
- No Sound from Subwoofer: Re-pair the subwoofer with the soundbar as described in section 3.7.
- Bluetooth Connection Issues: Ensure the soundbar is in pairing mode. If already connected to a device, hold the Bluetooth button for 3 seconds to disconnect and allow new pairing.
- Remote Control Not Responding: Check the batteries in the remote control. Ensure there are no obstructions between the remote and the soundbar.
7. User Tips
- Easy Connection: Many users find the connection process straightforward, often taking around half an hour for initial setup.
- Optimal TV Audio Settings: If you experience no sound when connected via HDMI ARC or Optical, remember to check your TV's audio settings and ensure the output is set to 'PCM'.
- Subwoofer Re-pairing: If your subwoofer loses connection or produces no sound, a quick re-pairing procedure (holding the 'SUB PAIR' button on the remote and the ON/OFF button on the subwoofer) usually resolves the issue.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | U2600 |
| Power Supply | AC 100-240V, ~50/60Hz |
| Drivers | 2.25" x 3 (Soundbar) + 2.25" x 4 (Surround speaker) + 6.5" (Subwoofer) |
| Frequency Response | 35Hz - 18kHz |
| Standby Power | <0.5W |
| Operating Temperature | -10°C - 45°C / 14°F - 113°F |
| Dimensions and Weight | |
| Soundbar (W x H x D) | 400 x 70 x 90 mm (15.7" x 2.8" x 3.5") |
| Subwoofer (W x H x D) | 185 x 288 x 260 mm (7.3" x 11.3" x 10.2") |
| Surround Speaker (W x H x D) | 135 x 70 x 90 mm (5.3" x 2.8" x 3.5") |
| Packaging (W x H x D) | 476 x 338 x 346 mm (18.7" x 13.3" x 13.6") |
| Net Weight | 7.8kg / 17.2lbs |
| Gross Weight | 10kg / 22lbs |
9. Warranty and Support
If you need support, kindly reach out to our service team. We are always glad to help.
- Email Support: support@ultimea.com
- US Phone Support: +1 888-598-8875 (Mon-Fri 9am-5pm PST)
- EU Phone Support: +49 89-628-25828 (Mon-Fri 9am-5pm CET)
For the full Declaration of Conformity, please refer to the official document provided with your product or available on the manufacturer's website. This product conforms to essential requirements of RED Directive (2014/53/EU) & RoHS (2011/65/EU).
Trade Marks: Bluetooth® and HDMI™ are registered trademarks of their respective owners.
10. Regulatory Compliance
10.1 Proper Disposal Instructions
This mark on the product or its packaging indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
10.2 FCC Regulatory Compliance
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
10.3 ISED Warnings (Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.