YOSOO 4G0915519

Contents

YOSOO Car Battery Fuse Overload Protection Trip User Manual

Model: 4G0915519

1. Introduction

This manual provides instructions for the installation, function, and maintenance of the YOSOO Car Battery Fuse Overload Protection Trip, model 4G0915519. This product is designed as a direct aftermarket replacement part for specific Audi vehicles, ensuring stable characteristics and reliable performance in protecting your vehicle's electrical system from overload.

YOSOO Car Battery Fuse Overload Protection Trip
Figure 1: YOSOO Car Battery Fuse Overload Protection Trip (Model 4G0915519)

2. Compatibility

This Car Battery Fuse Overload Protection Trip (OE Part Number: 4G0915519) is compatible with the following vehicle models:

  • Audi A6 S6 C7 (Model Years: 2011-2014)
  • Audi Q5 SUV (Model Years: 2011-2016)
Audi A6 with the fuse trip
Figure 2: Illustrative image of the product's application in an Audi vehicle.

3. Installation Instructions

This product is a direct aftermarket replacement. Installation should be performed by a qualified technician or an individual with experience in automotive electrical systems. Always disconnect the vehicle's battery before performing any electrical work.

  1. Safety First: Ensure the vehicle's ignition is off and the battery's negative terminal is disconnected to prevent electrical shock or damage to the vehicle's electrical system.
  2. Locate the Existing Fuse Trip: Identify the current battery fuse overload protection trip in your vehicle. Refer to your vehicle's service manual for the exact location.
  3. Remove the Old Unit: Carefully disconnect any wiring harnesses and unbolt the old fuse overload protection trip from its mounting point.
  4. Install the New Unit: Position the YOSOO 4G0915519 replacement unit in the same location. Secure it with the appropriate fasteners.
  5. Connect Wiring: Reconnect the wiring harnesses to the new fuse trip, ensuring all connections are secure and correctly oriented.
  6. Reconnect Battery: Reconnect the vehicle's negative battery terminal.
  7. Test Functionality: Start the vehicle and check for any warning lights or abnormal behavior. Ensure all electrical systems are functioning correctly.

For detailed, vehicle-specific installation procedures, please consult your vehicle's official service manual or a professional automotive technician. A general user manual (PDF) for this product may also be available for reference: View User Manual (PDF).

4. Operation and Function

The YOSOO Car Battery Fuse Overload Protection Trip (4G0915519) is a passive safety device designed to protect your vehicle's electrical system from damage caused by excessive current flow or short circuits. It functions by automatically interrupting the electrical circuit when an overload condition is detected, preventing potential damage to sensitive electronic components and reducing the risk of fire.

Once an overload event occurs and the device trips, it will cut off power to the affected circuit. After the fault condition is resolved, the device may need to be reset or replaced, depending on the specific design and severity of the overload. This particular model is designed for replacement after a trip, ensuring optimal protection.

5. Maintenance

This fuse overload protection trip is a sealed unit and does not require routine maintenance. However, regular inspection of your vehicle's battery and electrical system is recommended to ensure optimal performance and identify any potential issues before they lead to an overload event.

  • Periodically check battery terminals for corrosion and ensure they are clean and tight.
  • Inspect all visible wiring for signs of wear, fraying, or damage.
  • If the fuse trip activates, it indicates a significant electrical issue. Have the vehicle's electrical system diagnosed by a professional to identify and rectify the root cause of the overload.

6. Troubleshooting

If your vehicle experiences electrical issues after installing this component, consider the following troubleshooting steps:

ProblemPossible CauseSolution
Vehicle electrical system not functioning (e.g., no power, car won't start)Fuse trip has activated due to an overload or short circuit.
  1. Inspect the fuse trip for visible signs of activation (e.g., a tripped indicator, if present, or physical damage).
  2. Identify and resolve the underlying electrical fault causing the overload.
  3. Replace the fuse overload protection trip with a new unit (as this model is designed for replacement after a trip).
Intermittent electrical issuesLoose connection, faulty installation, or another electrical component issue.
  1. Check all connections to the fuse trip for tightness and proper seating.
  2. Verify correct installation according to Section 3.
  3. If issues persist, consult a professional automotive electrician.

Important: Never attempt to bypass or repair a tripped fuse overload protection device. Always replace it with a new, compatible unit after resolving the underlying electrical fault.

7. Specifications

FeatureDetail
Product TypeProtective Device Accessories
Brand NameYOSOO
Model Number (OE)4G0915519
MaterialABS
OriginMainland China
Package Quantity1 unit
Package Length7 cm
Package Width5 cm
Package Height2 cm
Package Weight0.036 kg
Close-up of the fuse trip showing details
Figure 3: Detailed view of the fuse trip component.

8. Warranty and Support

As an aftermarket replacement part, specific warranty terms may vary. Please retain your proof of purchase. For any questions regarding installation, compatibility, or product performance, please contact the seller or manufacturer directly. It is recommended to consult a professional automotive technician for diagnosis and installation to ensure proper function and safety.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.