G21 G21

Contents

G21 GPS Head Up Display (HUD) Instruction Manual

Digital Speedometer with Compass, Time, and Alarm Functions

1. Product Overview

The G21 GPS Head Up Display (HUD) is a versatile digital speedometer designed to enhance driving safety by projecting essential driving data directly into the driver's line of sight. It is compatible with all vehicle models and utilizes GPS for accurate speed, time, and other metrics.

G21 GPS Head Up Display product shot
Figure 1: G21 GPS Head Up Display
G21 HUD displaying driving data on a car dashboard
Figure 2: G21 HUD displaying driving data on a car dashboard, improving driving safety.

Product Components

Product list showing included components
Figure 3: Included components: G21-HUD unit, Rotary Suction Cup Holder, Type-C USB line, Non-slip mat, and Instructions.

2. Setup and Installation

Important Reminder

The operating voltage of this product is 5V. It is forbidden to use a voltage higher than 5V or change the installation line.

First Installation

  1. Plug the power line (USB line) into the car's USB port.
  2. After the product is powered on, the satellite icon will flash.
  3. Wait for the device to search for satellite signals.
  4. When '---' shows '00', it means the HUD has successfully connected to satellites.

Mounting Options

The G21 HUD can be placed on the dashboard using the non-slip mat or mounted on the windshield using the rotary suction cup holder for optimal viewing.

Video 1: Demonstration of G21 HUD features and installation methods, including dashboard placement and suction cup mounting.

3. Operating Instructions

Display Function Introduction

Diagram of G21 Display Functions
Figure 4: Detailed diagram of the G21 HUD display functions.
  • Speed Display Area: Shows current speed in MPH or KM/H.
  • Multi-function Display Area: Displays Miles/Total mileage, KM/Acceleration time, Altitude, Driving distance, Driving time, Time.
  • Compass: Indicates cardinal directions (N, S, W, E).
  • Satellite Icon: Indicates GPS signal status.
  • Fatigue Driving Icon: Alerts for prolonged driving.
  • Speed Alarm Icon: Activates when overspeed limit is exceeded.
  • Ambient Lighting: Decorative lights on the sides of the unit.

Dial Button Function Introduction

The G21 HUD features a multi-directional dial button for navigation and settings adjustment.

  • Short press vertically:
    1. Switch the multi-function display.
    2. Go to and exit the parameter value adjustment interface in the setting menu.
  • Long press vertically for 2 seconds:
    1. Go to the settings menu.
    2. After adjusting a parameter value, long press to save and exit.
  • Dial left:
    1. Turn on or off the ambient light.
    2. Adjust the parameter value in the settings menu.
  • Dial right:
    1. Turn on or off the driving direction.
    2. Adjust the parameter value in the settings menu.

Setting Mode

To enter the setting menu, long press the dial button vertically. Use the dial right to choose a menu item, short press vertically to enter parameter adjustment, and long press vertically to save and exit.

Setting Menu Options
Menu ItemFunctionAdjustment RangeInstructionsDefault Value
1Speed fine-tuning50-150Adjust HUD speed if inconsistent with car's speedometer (e.g., if car shows 100 Km/H and HUD shows 105 Km/H, adjust HUD parameter to 102).107
2Level 1 overspeed alarm setting0-400Alarm when vehicle speed exceeds the set value.150
3Level 2 overspeed alarm setting0-400Alarm when vehicle speed exceeds the set value.180
4Level 3 overspeed alarm setting0-400Alarm when vehicle speed exceeds the set value.200
5Fatigue driving reminder0-80 means off, 1-8 hours for reminder interval.0
6Brightness adjustment0-11"AUTO" for automatic adjustment, "1-11" for manual adjustment range.0
7Speed Unit0-10 is kilometers (Km/H), 1 is miles (MPH).0
8Altitude unit0-10 is meters, 1 is feet.0
9Total mileage adjust0-99999Right dial to switch; Short press vertically to adjust.0
10Time12H/24HDefault is 24-hour format. Dial right or left to switch.24H
11Time calibration-12:00-12:00Time zone adjustment. Choose your area's time zone. HUD automatically adjusts to local time after satellite search.0
12Restore factory settings0-1Default value is "0". Adjust to "1", short dial vertically to restore.0
Image illustrating overspeed and fatigue driving reminders
Figure 5: Multiple speeding alarms and fatigue driving time reminders can be set up.

4. Maintenance

To ensure optimal performance and longevity of your G21 GPS HUD, keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Avoid exposing the device to extreme temperatures or direct sunlight for extended periods. Do not use abrasive cleaners or solvents.

5. Troubleshooting (FAQ)

The screen has no display and there is no power.

Check if the USB cable is damaged or replace it with a new one for testing. Do not use a voltage higher than 5V for power supply.

No speed display.

After the product is powered on, move the car to an open road to receive the satellite signal. Wait for the satellite signal search. When '---' shows '00', it means the HUD has successfully connected to satellites.

The speed is still displayed after the car stops.

When driving in underground parking lots, tunnels, under overpasses, and other places where the signal is unstable, the data displayed by the product may have deviation. Driving the car to an open road will restore it to normal.

Inaccurate vehicle speed.

  1. Please check if the speed unit is correct (KM/H or MPH). Refer to the speed unit setting in Menu Item 7.
  2. If the speed unit is correct, fine-tune the speed. For example, if the car displays 100 Km/H and the HUD displays 105 Km/H, adjust the HUD parameter value to 102 in Menu Item 1.

Driving direction display error.

Without vehicle speed, the satellite cannot identify the direction of the vehicle. The product can only display normally after the vehicle speed exceeds 5 Km/H.

Time calibration.

  1. Adjust time zone: If the satellite icon flashes, it indicates no satellite has been found. The default time zone is East 8 (8:00). If you need to adjust to other time zones, go to Setting Menu Item 11.
  2. Adjust time: When the satellite icon stops flashing, the device will automatically switch to the correct time. If needed, go to Setting Menu Item 11, adjust the local time zone, save, and exit.

6. Specifications

  • Model: G21
  • Dimensions: 83 x 56 x 18 mm
  • Power Input: 5V (USB line)
  • Display Type: HD Digital Display
  • Features: GPS Speedometer, Compass, Time, Total Mileage, Altitude, Driving Distance, Driving Time, Overspeed Alarm, Fatigue Driving Reminder, Ambient Lighting.
  • Speed Units: MPH, Km/H
  • Altitude Units: Meters, Feet

7. User Tips

  • For best GPS signal reception, ensure the vehicle is in an open area during initial setup.
  • Regularly verify that the speed unit (MPH/Km/H) matches your preference to avoid misinterpretation.
  • If speed readings are consistently inaccurate, use the 'Speed fine-tuning' setting (Menu Item 1) to calibrate the device.
  • Utilize the overspeed and fatigue driving alarms to promote safer driving habits.
  • If experiencing time discrepancies, check and adjust the time zone setting (Menu Item 11).

8. Warranty and Support

For any issues or support inquiries regarding your G21 GPS Head Up Display, please contact the seller or retailer from whom you purchased the product. They will be able to provide assistance with troubleshooting, returns, or warranty claims in accordance with their policies.

A user manual in PDF format is also available for download: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.