1. Introduction
Thank you for purchasing the Nitecore EDC37 8000 Lumens Flashlight. This manual provides detailed instructions for the safe and effective use of your new flashlight. Please read it carefully before operation and retain it for future reference.

Figure 1: Nitecore EDC37 8000 Lumens Flashlight
2. Features
- Utilizes 2 x UHi 20 MAX LEDs with a maximum output of 8,000 lumens.
- Peak beam intensity of 44,010cd and max throw of 420 meters.
- 4 brightness levels to cycle through: SEARCH, LUMIN SHIELD™, and STROBE available.
- One button customizable access to SEARCH / LUMIN SHIELD™ / STROBE READY™.
- Multifunctional OLED real-time display for brightness level, lumens, battery level, and runtime.
- Built-in 8,000mAh Li-ion battery.
- Uses a precision metal orange peel reflector, offering both long range and wide angle illumination.
- Advanced Power Cut-Off (APC) technology for an ultra-low standby power consumption.
- Highly efficient constant current circuit provides a stable output up to 190 hours.
- Dual tail switches enable intuitive operations.
- Level preset function available for setting the desired level in advance.
- Built-in Li-ion battery fast charging circuit with a USB-C port.
- Lockout Switch (Rapid Lock™) available (Patent No. CN202322748377.2).
- Designed with detachable high-hardness silicon nitride ceramic tips, capable of breaking glass quickly.
- Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6).
- High strength stainless steel body with PVD (Physical Vapor Deposition) coating.
- Waterproof and dustproof rating in accordance with IP54.
- Impact resistant to 2 meters.

Figure 2: Key Features Overview
3. Package Contents
- Nitecore EDC37 Flashlight
- USB-C Charging Cable
- Lanyard
- Wrench
- Screw x 8 (for replacing glass-breaking tips)

Figure 3: Items included in the package
4. Specifications
4.1. General Specifications
- Length: 108.0mm (4.25")
- Width: 39.3mm (1.55")
- Height: 31.0mm (1.22")
- Weight: 199g (7.02 oz) (Accessories Not Included)
- Impact Resistance: 2 meters
- Waterproof Rating: IP54

Figure 4: EDC37 Dimensions
4.2. Performance Data (FL1 Standard)
| Mode | Lumens | Runtime | Throw Distance | Peak Beam Intensity |
|---|---|---|---|---|
| LUMIN SHIELD™ (Floodlight) | *8,000 | — | *380m | *37,550cd |
| SEARCH (Spotlight) | *3,000 | — | *420m | *44,010cd |
| HIGH | *1,500 | 7h 30min | *230m | *13,740cd |
| MID | 400 | 8h 30min | 115m | 3,310cd |
| LOW | 100 | 30h | 80m | 1,637cd |
| ULTRALOW | 15 | 190h | 30m | 230cd |
| STROBE | *8,000 | — | — | — |
Note: The stated data is measured using the built-in Li-ion battery (8,000mAh), in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, at an ambient temperature of 26°C (79°F) from the NITECORE Lab. The data may vary in real-world use due to different environmental conditions. The data is tested without temperature regulation.

Figure 5: Detailed Technical Data
5. Setup
5.1. Initial Use
Before first use, please remove the white stopper from the Lockout Switch (Rapid Lock™).
5.2. Installing Screws (Replacing Glass-Breaking Tips)
The EDC37 is factory-installed with four glass-breaking tips. These can be replaced with screws (included in the package) by following these steps:
- Slide the Lockout Switch (Rapid Lock™) up to access Lockout Mode to prevent accidental activation.
- Loosen the four glass-breaking tips counterclockwise with the included wrench and remove them.
- Insert the four screws and tighten them clockwise.

Figure 6: Detachable Glass-Breaking Tips
5.3. Lanyard Installation
Attach the lanyard to the designated lanyard hole on the flashlight for secure carrying and quick access.

Figure 7: EDC37 Ready for Everyday Carry with Lanyard
6. Operating Instructions
6.1. Multifunctional OLED Display
The EDC37 is equipped with a multifunctional OLED display. (Please remove the screen protector before first use). When the light is turned on, the screen will show the current info (Brightness Level, Lumens, Battery Level, and Runtime Remaining) before it goes out. After the screen goes out, half pressing the Tail Button can reactivate the screen.
- When SEARCH/LUMIN SHIELD™ is activated, the screen will display a progress bar going backward. Releasing the Customizable Button will return the flashlight to its previous status, and the progress bar will appear and gradually return to full.
- The recovery time of the progress bar depends on the temperature of the flashlight. If the temperature of the flashlight is too high, the progress bar may pause its recovery. During the recovery process, half pressing the Tail Button will exit the progress bar display.

Figure 8: Multifunctional OLED Real-Time Display
6.2. Tactical Momentary Illumination
- ULTRALOW: When the light is off, half press and hold the Tail Button to access ULTRALOW. Release to turn it off.
- SEARCH/LUMIN SHIELD™/STROBE (Customizable Button - Half Press): When the light is off, half press and hold the Customizable Button to access the configured mode. Release to turn it off.
- SEARCH/LUMIN SHIELD™/STROBE (Customizable Button - Full Press): When the light is off, full press and hold the Customizable Button to access the configured mode. Release to turn it off.
6.3. On/Off
- On: When the light is off, full press the Tail Button to turn it on.
- Off: When the light is on, full press the Tail Button to turn it off.
6.4. Brightness Levels Adjusting
When the light is on, half press the Tail Button to cycle through the following brightness levels: ULTRALOW → LOW → MID → HIGH. The flashlight is designed with a memory function; when reactivated, it will automatically access the previous memorized brightness level.
6.5. Level Preset Function
The EDC37 features a preset brightness level function. When the light is off, half press the Tail Button to activate the screen. Additional half presses of the Tail Button will sequentially display the brightness level and lumens of ULTRALOW, LOW, MID, and HIGH. Once the desired brightness level is displayed, full press the Tail Button to activate it.
6.6. Customizable Function
The EDC37 features a Customizable Button, allowing both half and full-press-and-hold of the Customizable Button to be configured independently to directly access SEARCH, LUMIN SHIELD™, or STROBE.
Customize Settings:
- Half-press-and-hold Configuration: When the light is on or off, while half pressing and holding the Customizable Button, full press the Tail Button to cycle through the following sequence: SEARCH (Default Setting) / LUMIN SHIELD™ / STROBE. Once the desirable output is selected, release the Customizable Button. The light will memorize this setting for half-press-and-hold.
- Full-press-and-hold Configuration: When the light is on or off, while full pressing and holding the Customizable Button, full press the Tail Button to cycle through the following sequence: SEARCH (Default Setting) / LUMIN SHIELD™ / STROBE. Once the desirable output is selected, release the Customizable Button. The light will memorize this setting for full-press-and-hold.
- Activation: When the light is on or off, half or full press and hold the Customizable Button to activate the customized setting configured above. Release to return to the previous status.
Reset to Factory Default:
While in Lockout Mode, half or full press and hold the Customizable Button without releasing. Then, quickly half press the Tail Button three times or more. The flashlight will flash three times, and the display will show "FACTORY RESET SUCCESSFUL" to confirm that the reset has been successfully completed.
6.7. Lockout/Unlock (Rapid Lock™)

Figure 9: Rapid Lock™ Lockout Switch
- Lockout (Default Setting): When the light is on/off, slide the Lockout Switch (Rapid Lock™) up to access Lockout Mode. The lock icon can be seen below the Lockout Switch (Rapid Lock™). Both buttons are unavailable to activate the flashlight in Lockout Mode.
- Unlock: In Lockout Mode, slide down the Lockout Switch (Rapid Lock™) to exit Lockout Mode.
7. Charging Function
The EDC37 is equipped with an intelligent charging system. Please charge the flashlight before first use.
- Power Connection: Use the USB cable to connect an external power supply (e.g., an adapter, a power bank, or other charging devices) to the USB-C charging port to begin the charging process.
- During the charging process, the screen will show the battery charging process and go out automatically after 30 seconds.
- When the battery is fully charged, the screen will automatically display a full battery level icon and "100%" for 30 seconds.
- SEARCH/LUMIN SHIELD™/STROBE are unavailable during the charging process.
- The charging time is approximately 2 hours (charged via a PD/QC adapter).
- When fully charged, the standby time is approximately 12 months.

Figure 10: USB-C 18W Intelligent Fast Charging
8. Maintenance
8.1. General Care
Keep the flashlight clean and dry. Wipe with a soft cloth if needed. Avoid dropping the flashlight or subjecting it to strong impacts.
8.2. Advanced Temperature Regulation (ATR)
The integrated ATR technology regulates the output of the EDC37 according to the working condition and ambient environment to maintain optimal performance. This helps prevent overheating and prolong the lifespan of the flashlight.

Figure 11: Triple Temperature Control System
9. Troubleshooting
- Flashlight not turning on: Ensure the Lockout Switch (Rapid Lock™) is in the unlocked position. Check battery level on the OLED display and charge if necessary.
- Reduced brightness during high output: This is normal behavior due to the Advanced Temperature Regulation (ATR) module preventing overheating. To restore previous brightness, reactivate SEARCH/LUMIN SHIELD™/STROBE mode.
- Display issues: If the OLED display is not functioning correctly, try resetting the flashlight to factory defaults (see section 6.6).
10. User Tips
- The 1500 lumens brightness level is often sufficient for general night use, conserving battery life while still providing ample illumination.
- Despite its high power, the EDC37 is compact and fits well in a pocket, making it convenient for everyday carry.
- The built-in 8000mAh battery offers impressive runtime, with users reporting significant battery remaining even after extended use.
- The flashlight may heat up quickly at maximum output, which is expected due to its high lumen rating and the ATR system managing temperature.
11. Warranty and Support
NITECORE products are warranted for quality. Any DOA/defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective/malfunctioning NITECORE products can be repaired free of charge within 24 months from the date of purchase. Beyond 24 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
11.1. Warranty Exclusions
The warranty will be nullified if:
- The product(s) is/are broken down, reconstructed, and/or modified by unauthorized parties.
- The product(s) is/are damaged due to improper use.
11.2. Contact Information
For the latest information on NITECORE products and services, please contact a local NITECORE distributor or send an email to service@nitecore.com.
SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Unit 6355, 5/F, No. 1021 Gaopu Road, Tianhe District, Guangzhou, 510653, Guangdong, China
12. Video Demonstration
Watch this official video for a visual guide on the Nitecore EDC37's features and operation.
Video 1: Nitecore EDC37 Product Overview and Demonstration
13. PDF User Manual
For a complete, printable version of the user manual, please refer to the official PDF document: Nitecore EDC37 User Manual (PDF).