NEWBOLER BAG220

Contents

NEWBOLER 10L Large Capacity Bicycle Bag Instruction Manual

Model: BAG220

Product Overview

The NEWBOLER 10L Large Capacity Bicycle Bag (Model BAG220) is a fully waterproof wheel bag designed for various bicycle types, including mountain bikes, off-road/road bikes, e-scooters, and touring bikes. It features a quick-release bracket system for easy attachment and removal, and a roll-top closure to ensure contents remain dry. The bag can also be used as a shoulder bag with the included strap.

NEWBOLER 10L Fully Waterproof Bicycle Bag with Quick Release Bracket Design
The NEWBOLER 10L bicycle bag attached to a bike fork, highlighting its waterproof and quick-release features.
NEWBOLER 10L bicycle bag showing its capacity for daily necessities and dimensions.
An illustration of the 10L capacity bag holding various items like an iPad, mobile phone, pump, and glasses, with dimensions of approximately 36cm (14.2in) height, 14cm (5.5in) width, and 19cm (7.48in) length.
Demonstration of the NEWBOLER bicycle bag's quick-release installation, waterproofing, and capacity.

Setup Instructions

The bag utilizes a quick-lock system with a mounting bracket and adapter for attachment to the bike's front fork or tube. It supports both 3-point adjustable band-clamps and M5 screw holes for eyelets forks.

  1. Prepare the Bracket: Ensure all components of the quick-release bracket are present.
  2. Choose Mounting Method:
    • For Forks without Eyelets: Use the three adjustable band-clamps. Position the bracket on the fork and secure it tightly with the clamps, ensuring they are locked by screws for stability.
    • For Forks with M5 Eyelets: Align the bracket's M5 screw holes with your fork's eyelets and secure it using appropriate M5 screws (not always included, check package contents).
  3. Attach the Bag: Once the bracket is securely installed, align the buckle on the bag with the quick-release mechanism on the bracket. Insert the bag until it snaps into place with a click.
  4. Verify Security: Gently pull on the bag to ensure it is firmly attached and does not wobble.
Step-by-step guide for installing the NEWBOLER bicycle bag bracket on a bike fork.
Detailed visual instructions for mounting the quick-release bracket to the bicycle fork using adjustable band-clamps and M5 screw holes.
Steps for attaching the NEWBOLER waterproof bag to its installed quick-release bracket.
Visual guide demonstrating how to properly roll the bag closure and attach it to the pre-installed quick-release bracket on the bike.
Close-up of the NEWBOLER bag's quick disassembly bracket with one-touch removal mechanism.
Detail of the quick-release bracket, showing the one-touch removal button for easy detachment.

Operating Instructions

Using the Bag on Your Bike:

  1. Loading Contents: Place your items inside the 10L main compartment. The bag features internal compartment pockets for better organization.
  2. Sealing for Waterproofing: To ensure full waterproofing, fold the top edge of the bag down three or four times. Then, fasten the buckles on both sides of the roll closure.
  3. Attaching to Bike: Align the bag with the installed quick-release bracket on your bike's front fork or tube and push it down until it clicks securely into place.
  4. Detaching from Bike: To remove the bag, simply move the red release lever on the bracket and pull the bag upwards. This allows for quick disassembly.

Using as a Shoulder Bag:

The bag comes with a supplied shoulder belt. Fasten the shoulder strap to the D-rings located on both sides of the bag's roll closure. This allows you to carry the bag comfortably off the bike.

NEWBOLER bicycle bag demonstrating various ways to use the shoulder strap, including single-shoulder and hand-carry.
Product display showing the versatility of the bag with its shoulder strap, allowing it to be carried as a single-shoulder bag or by hand.

Maintenance

  • Cleaning: Wipe the bag clean with a damp cloth and mild soap. Avoid harsh chemicals or abrasive materials that could damage the PVC material.
  • Drying: Ensure the bag is completely dry before storing to prevent mold or mildew.
  • Waterproofing: Always ensure the roll closure is properly folded and buckled to maintain the bag's waterproof integrity.
  • Storage: Store the bag in a cool, dry place away from direct sunlight when not in use.
NEWBOLER bicycle bag being sprayed with water to demonstrate its waterproof capabilities.
The bag undergoing a water spray test, showing water beading off its surface, confirming its rainproof function.

Troubleshooting

  • Bag feels loose on bracket: Recheck the installation of the mounting bracket. Ensure all band-clamps are tightened securely or M5 screws are firmly fastened. Make sure the bag is fully clicked into the quick-release mechanism.
  • Water leakage: Verify that the roll-top closure is folded down at least three to four times and that both side buckles are securely fastened. Inspect the PVC material for any punctures or tears.
  • Difficulty with quick release: Ensure the red release lever is fully depressed when attempting to remove the bag. If the mechanism feels stiff, ensure it is clean and free of debris.

Specifications

Feature Detail
Brand Name NEWBOLER
Model Number BAG220
Type Wheel bag
Capacity 10 Liters
Material PVC
Function Rainproof
Product Size (approx.) 19 x 10.3 x 9.2 cm (7.5 x 4.1 x 3.6 inches)
Product Weight (approx.) 1.334 kg
Package Dimensions (approx.) 38 x 32 x 9 cm
Mounting System Quick-release bracket with 3-point adjustable band-clamps or M5 screw holes
Color Options Black, Orange, Yellow
Diagram showing NEWBOLER bicycle bag compatibility with Mountain Bikes, Off-Road/Road Bikes, E-Scooters, and Touring Bikes.
Diagram illustrating compatible bike types and the 3-point fixing system.

User Tips

  • The 10L capacity is suitable for carrying daily necessities and can even accommodate a small tent or sleeping bag for overnight trips.
  • The quick-release mechanism is highly praised for its ease of use, making it convenient to detach the bag when you reach your destination.
  • Users appreciate the sturdy installation, whether using the band-clamps or eyelet screws, ensuring the bag remains stable during rides.
  • The material is noted for its high quality and durable feel, contributing to the bag's overall reliability.

Warranty and Support

For detailed warranty information and customer support, please refer to the official user manual PDF provided by the manufacturer. You can access the user manual here.

If you encounter any issues not covered in this manual or the PDF, please contact the NEWBOLER Official Store customer service for assistance.

© 2024 NEWBOLER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.