Introduction
This manual provides essential information for the installation, operation, and maintenance of your Otilli Motorcycle Fly Screen. Designed for the 1290 Super Duke R and RR models from 2021 to 2023, this accessory enhances your motorcycle's aesthetics and provides protection from road debris.
Safety & Warnings
Important Safety Information:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
Package Contents
Please verify that all items are present in your package:
- 1x Motorcycle Fly Screen (Black, ABS Plastic)
- Mounting Screws (quantity as required for installation)
Specifications
| Attribute | Value |
|---|---|
| Brand Name | Otilli |
| Model Name | For 1290 Super Duke R / RR |
| Fitment | For 1290 Super Duke R / RR 2021-2023 |
| Item Type | Windscreens/Wind Deflectors |
| Material | ABS Plastic |
| Color | Black |
| Condition | 100% brand new |
| Quantity | 1 pc |
| Item Weight | 0.15kg |
| Item Height | 0inch |
| Item Width | 17.8cm |
| Item Length | 19.5cm |
| Origin | Mainland China |
| High-concerned chemical | None |
Setup & Installation
While professional installation is highly recommended, the following general steps can guide you. Installation is typically straightforward, estimated to take one person approximately 10 minutes.
- Preparation: Ensure your motorcycle is turned off and stable. Gather necessary tools (e.g., screwdriver, as indicated by the screw type).
- Identify Mounting Points: Locate the existing mounting points on your motorcycle's front fairing or headlight area where the fly screen is intended to attach. Refer to Figure 1 for the installed appearance.
- Position the Fly Screen: Carefully align the fly screen with the mounting points on your motorcycle. The back design (Figure 2 and Figure 3) shows the integrated brackets and screw holes.
- Secure with Screws: Use the provided mounting screws to attach the fly screen. Ensure screws are tightened securely but do not overtighten to avoid damaging the plastic or motorcycle components.
- Final Check: Verify that the fly screen is firmly attached and does not wobble. Ensure it does not obstruct any controls or lighting.
Operating Instructions
The Otilli Motorcycle Fly Screen operates passively once installed. Its primary functions are:
- Protection: Helps keep your motorcycle's fairing and cowl free from dirt, road debris, and stone chips.
- Reduced Spray: Minimizes spray on your headlight during wet conditions.
- Aesthetic Enhancement: Contributes to the overall look and style of your motorcycle.
Maintenance
To ensure the longevity and appearance of your fly screen:
- Cleaning: Clean regularly with a soft cloth and mild soap solution. Avoid abrasive cleaners or solvents that could damage the ABS plastic.
- Inspection: Periodically check all mounting screws for tightness. Re-tighten if necessary.
- Damage: If the fly screen becomes damaged, replace it to maintain optimal protection and appearance.
Troubleshooting
Product Does Not Fit
If you encounter issues with the fly screen not fitting your motorcycle:
- Verify Model and Year: Double-check that your motorcycle is a 1290 Super Duke R or RR and falls within the 2021-2023 model years.
- Check for Obstructions: Ensure no existing motorcycle components are preventing proper alignment.
- Contact Support: If the issue persists, please contact the seller or manufacturer for assistance.
User Tips
- Users have reported good quality and finish, noting a "plug and play" installation without modifications.
- The product is considered a good alternative to more expensive branded options.
Warranty & Support
For detailed warranty information and further support, please refer to the official user manual PDF provided by the manufacturer. A digital copy of the user manual is available at: User Manual (PDF).
Manufacturer Information:
Foshan Xinhongmian Trading Co., Ltd.
Address: 901A1, 9th Floor, Fengxiu Building, No. 18, Fengxiu Gang Industrial Zone, Bichong, Huangqi, Dali Town, Nanhai District, Foshan City, Guangdong Province, China
Tel: +86-13632806159
Email: 243226686@qq.com
EU Authorized Representative:
VAT SPEED SL
Address: Calle Antonio Salvador N99.1, 28026 Madrid, Spain
Tel: +34-916321624
Email: services@vatspeed-eu.com
For any questions or assistance, you may contact the seller directly.