INSE S10

Contents

INSE S10 Cordless Stick Vacuum Cleaner User Manual

Model: S10

1. Important Safety Instructions

Please read all instructions and cautionary markings in this manual and on the machine before use. Failure to follow warnings and instructions may result in electric shock, fire, and/or serious injury.

General Precautions:

  • Do not use near open flames or heat sources.
  • Do not pick up water, liquids, sharp objects (glass, screws), flammable liquids, matches, cigarette ends, hot ashes, or any hot, burning, or smoking objects.
  • Do not use if any openings are blocked.
  • Do not store in direct sunlight or high humidity. This appliance is for indoor domestic use only.
  • Do not use any damaged accessories or adaptors other than those supplied with this appliance.
  • Do not use the appliance for anything other than its intended use.
  • Do not use if it has been dropped or shows visible signs of damage.
  • Do not expose the appliance to rain or operate with wet hands. Do not immerse in water or any other liquid.
  • Only use with the provided power adapter.
  • Always ensure the appliance has cooled fully after use before cleaning or maintenance.
  • Switch off and disconnect from the mains power supply before changing or fitting accessories.
  • Take care when equipping accessories with rotating parts as this could cause entrapment.
  • Children aged 8 and above, and individuals with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, may use this appliance only if supervised or instructed on safe use and understanding of hazards.
  • Check the voltage on the rating plate matches your power supply.

Battery Safety:

  • If the battery pack becomes exhausted, remove it from the product to avoid leakage.
  • If battery liquid leaks, avoid contact with skin or eyes. If contact occurs, wash the affected area with copious water and seek medical advice.
  • Keep the battery pack out of reach of children.
  • Secondary battery packs need to be charged before use. After extended storage, charge and discharge several times for maximum performance.
  • Do not leave battery packs on charge for prolonged periods.
  • Use only the charger specifically provided for the product.
  • Do not short-circuit the supply terminals.
  • Do not store above 60°C (140°F). Avoid direct sunlight.
  • Do not use battery packs not designed for this product.
  • Do not dispose of the battery pack in a fire.
  • Do not crush, puncture, dismantle, or otherwise damage the battery pack.
  • Do not expose the battery pack to heat or fire as it may explode.
  • Do not subject the battery pack to mechanical shock.
  • Do not dispose of exhausted battery packs in household waste. Take them to a local recycling station.
  • This appliance is fitted with a 25.2V 2200mAh Li-ion rechargeable battery.

2. Product Overview and Parts List

Familiarize yourself with the components of your INSE S10 Cordless Stick Vacuum Cleaner.

Product Diagram:

Diagram of INSE S10 Cordless Vacuum Cleaner with numbered parts and key function board.

Figure 1: Product Overview with Key Function Board and Labeled Parts.

  1. Handle
  2. Main Motor
  3. Main Motor Release Button
  4. Retractable Metal Tube
  5. Metal Tube Release Button
  6. LED Lights
  7. Motorized Cleaner Head
  8. Push Button
  9. Dust Cup Open Button
  10. Dust Cup Release Button
  11. Battery Pack
  12. Battery Locking Button
  13. Power Switch

Key Function Board:

  • Lock key
  • Gear indicator lamp
  • Speed regulation key

Included Parts and Accessories:

Image showing all included parts and accessories for the INSE S10 vacuum cleaner.

Figure 2: All components and accessories.

  • Main Motor
  • Metal Filter
  • Wall Bracket
  • Power Adaptor
  • Retractable Metal Tube
  • Stiff Roller Brush
  • Motorized Cleaner Head
  • HEPA
  • Battery Pack
  • 2-in-1 Brush
  • Pre-Filter (2, 1 installed in dustbin)
  • LED Long Crevice
  • 2-in-1 Cleaning Gadget
  • Quick Start Guide
  • User Manual

3. Assembly and Storage

Assembly:

The INSE S10 can be assembled in various configurations for different cleaning needs.

Diagram showing how to assemble the vacuum cleaner and mount it on the wall.

Figure 3: Assembly steps and wall mount.

  1. Attach Cleaner Head: Insert the tube end into the cleaner head port until you hear a click. Ensure the connection is tight. To remove, press the metal tube release button with one hand, hold the tube with the other hand, and pull it out.
  2. Attach Main Motor: Insert the metal tube end into the suction port of the main motor until you hear a click. Ensure the connection is tight. To remove, press the main motor release button with one hand, hold the main motor with the other hand, and pull the handle to remove the main motor from the tube.

Storage:

The vacuum cleaner comes with a wall bracket for convenient storage.

  • Hang the entire machine onto the wall bracket when not in use.

4. Operating Instructions

Preparation:

  • Ensure the battery power is sufficient. It is recommended to charge for 5-6 hours before the first use to ensure optimal performance.
  • Choose the appropriate attachment based on the cleaning area or surface.

Starting and Using the Vacuum:

  • Press the power switch once to turn on the vacuum. Press a second time to turn it off.
  • Press the mode button to switch between MIN, MID, and MAX power modes.
  • For continuous cleaning without holding the trigger, press the power switch to turn on, then push the lock button and release the power switch. The vacuum will continue to work. Push the lock button again to turn off the vacuum.

Accessory Usage:

  • Motorized Cleaner Head: Connects to the metal tube for daily floor/carpet cleaning, or directly to the main motor for trunk cleaning.
  • Stiff Roller Brush: Installs into the cleaner head, ideal for hard floors and carpets.
  • Retractable Metal Tube: Installs into the cleaner head, performs better for hard-to-reach corners.
  • LED Long Crevice: For corners and hard-to-reach places, can connect to the metal tube for ceiling spider webs.
  • 2-in-1 Brush: Switches between a brush and a wide crevice, suitable for fabric surfaces and corners.
  • 2-in-1 Cleaning Gadget: The blade end cuts tangled hair from the roller brush. The brush end cleans dirt inside the dustbin, strainer, or cleaner head.

Demonstration Video:

Video: Demonstrates the INSE S10 vacuum cleaner in use, highlighting its powerful suction, LED lights, anti-tangle brushroll, and easy dustbin emptying.

5. Charging the Battery

For safety, the battery is partially charged (up to 30%) before shipping. Please fully charge the battery before first use. A full charge from a flat state takes approximately 4.5 hours.

Charging Methods:

  1. Charging via Main Motor: Insert the battery pack into the main motor. Insert the power plug into the battery pack. Connect the power adapter to the power supply.
  2. Charging Separate Battery: Charge the separate battery directly by connecting the power adapter to the battery pack.

Battery Indicators:

  • On Work:
    • Three solid white lights: Full power
    • Two solid white lights: Medium power
    • One solid white light: Low power
    • One blinking white light: Lower than 10% of total power (needs recharge)
  • During Charging:
    • Three white lights blinking successively: Charging
    • Three steady lights: Charging complete

Important Notes on Charging:

  • The machine cannot be turned on during charging.
  • Charge the battery only with the 30V adapter provided by the manufacturer.
  • If storing the battery for a long time, keep it in a cool, dry place and ensure it is half-charged (2 glowing indicator lights).
  • If you need an additional battery, purchase from an authorized distributor.
  • The machine has built-in protection mechanisms for overcurrent, short circuit, and motor blocking, which will cause it to stop and trigger indicator alarms.

6. Maintenance

Regular maintenance ensures maximum performance of your vacuum cleaner. Do not wash the dustbin or cleaner head with water, as this may damage the motor.

Cleaning the Handheld Part of the Main Motor:

  • Turn off the vacuum before cleaning.
  • Wipe the surface with a clean cloth, avoiding water entering the inner part of the vacuum.
  • Do not place the vacuum under direct sunlight or in wet places after cleaning.

Cleaning the Dust Cup:

  • The -MAX- sign indicates the dust capacity limit. Empty the dust cup when dust approaches this sign.
  • Use the 2-in-1 cleaning gadget to clean the inside of the dust cup.

Cleaning the Detachable Roller Brush:

  1. Unlock the side lock on the underside of the cleaner head, remove the side cover, and take out the roller brush.
  2. Use the blade end of the 2-in-1 cleaning gadget to cut and remove any tangled hair.

Cleaning the Strainer and High-Efficiency Filter (HEPA):

It is crucial to regularly check and clean the High-efficiency filter/HEPA. Clean the filter if suction performance declines, and replace it if broken or unable to maintain suction. Do not bend or squeeze the HEPA.

Diagram showing the steps to remove and clean the strainer and HEPA filter.

Figure 4: Steps for cleaning the strainer and HEPA filter.

  1. Hold the main motor, press the button to open the dust bin cover, then rotate the strainer and filter one by one to take them out.
  2. If the metal filter and black mesh are too dirty, wash them with cool water. Clean the HEPA with the cleaning brush.
  3. Ensure the strainer and black mesh are completely dry before refitting.

7. Troubleshooting

Refer to the table below for common issues and their solutions. If the problem persists or is not listed, please contact customer support.

ProblemPossible CausesSolutions
Machine stops working or doesn't work1. Low battery or no battery power
2. There is blockage
3. Roller brush is tangled by hair
1. Charge the battery
2. Remove the blockage (check metal tube and filters)
3. Clean the roller and remove side covers to clear tangled hair
Roller brush stops spinningRoller brush is tangled by hairClean the roller and remove side covers to clear tangled hair
Weak suction power1. Dustbin, strainer or filter is full of dust
2. The strainer or filter is not installed
3. There is blockage
4. Roller brush is tangled by hair
1. Clean dustbin, strainer or filter; replace filter if necessary
2. Install strainer and filter
3. Remove the blockage (check metal tube and filters)
Abnormal motor soundThere is blockageRemove the blockage (check metal tube and filters)
Battery cannot be charged1. Wrong adaptor is used
2. Connection between power cord and battery is loose
1. Use the correct adaptor offered by manufacturer
2. Make sure the power cord is plugged tightly

8. Specifications

AttributeValue
Product ModelS10
Net Weight (Main Motor with Battery)1.6kg / 3.5lb
Rated Power350W
Dust Cup Capacity1.2L
Rated Voltage25.9V
Charging Time4.5 hours
Power Adapter Input100-240V~50/60Hz
Battery Capacity2200mAh
Power Adapter Output30V 500mA
Weight3 - 6 KG (overall package weight is 3.9kg)
Number of nozzles1-3 nozzles
Number of operating modes3-4
Battery TypeLi-ion
Liquid tank volume<3L
Filter TypeHEPA
Size (mm)435*330*195
LCDNo
Cleaning RouteRandom Type
Bag Or BaglessBagless
Cord Length (m)Wireless
Timing ReservationNo
Special Suction NozzleCorner Folding Brush
Dust Storage TypeDust Box/Dust Bucket
InstallationHand Held
CertificationROHS, CE
FunctionDry
Brand NameINSE
Voltage110V-240V
OriginMainland China
Remote ControlNo
Battery Life30-59 min (up to 50 mins max)

Power Mode and Runtime:

Any runtime posted on the website is the time when the machine runs without attaching to any surface and debris. Actual runtime will vary based on the power mode, battery capacity, attachment, debris amount, and cleaning area/surface.

Image showing the three suction modes (Eco, Comfortable, Deep) and their corresponding runtimes.

Figure 5: Suction Modes and Runtimes.

9. User Tips

  • Optimal Performance: For best results, ensure the battery is fully charged before each use. Regularly clean the filters and roller brush to maintain strong suction.
  • Value for Money: Users have noted this product offers great efficiency and competes well with more expensive alternatives.
  • Ease of Use: The vacuum is designed for straightforward operation, making cleaning tasks simple and effective.

10. Warranty and Support

For more product information or after-sales consultation, you can scan the QR code provided on the product packaging or in the Quick Start Guide.

If solutions in this manual do not resolve your issue, please contact customer support via email:

Email: help@vacservice.vip

A detailed user manual in PDF format is also available for download: INSE S10 User Manual (PDF)

© 2023 INSE. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.