SUPERIDE MTB/Road Bicycle Helmet with Rechargeable Rearlight

Contents

SUPERIDE Bicycle Helmet with Rechargeable Rearlight

Model: MTB/Road Bicycle Helmet with Rechargeable Rearlight

Introduction

Thank you for choosing the SUPERIDE Bicycle Helmet. This helmet is designed to provide protection and comfort for both mountain biking (MTB) and road cycling. It features an in-mold construction for durability, an ultralight design, and an integrated rechargeable rearlight for enhanced visibility. Please read this manual carefully before use to ensure proper fit, operation, and maintenance.

Important Safety Warnings

  • Warning: It is forbidden to disassemble or modify helmet parts without authorization when wearing them. Do not drill holes or attach heavy objects to the helmet, as this can damage its structural integrity. Removing the lining buffer layer will compromise impact absorption, leading to protection failure.
  • Caution: This product is a protective helmet for tactical training. It is not bulletproof and cannot withstand direct impacts from high-speed warheads. It is designed to protect against head impact, sharp object penetration, and debris damage in applicable scenarios.
  • If the helmet has endured a significant impact, even if there is no visible damage, it must be replaced immediately. The internal buffer layer may be compromised and unable to cope with secondary impacts. Regularly inspect the inner buffer layer and replace it if it shows signs of aging, hardening, or cracking.
  • The chin strap must be securely fastened throughout use to ensure the helmet remains firmly in place. Wearing overly thick headwear under the helmet is prohibited, as it can affect the helmet's fixing and impact absorption performance.

Specifications

SUPERIDE Specifications Header

Image: SUPERIDE logo with 'SPECIFICATIONS:' text, indicating the start of the product specifications section.

FeatureDescription
TypeIntegrally-molded Helmet
MaterialOuter Shell: In-mold polycarbonate; Inner Shell: EPS (Expanded Polystyrene)
WeightM: 360g, L: 380g
SizesM (54-58cm), L (58-62cm)
Air Vents15 Wind Tunnel vents with internal channeling
Comfort FeaturesRemovable and washable inner padding (Coolmax material), Comfort Liner and Chin Padding
VisibilityIntegrated Rechargeable Rearlight (non-reflective rear sticker)
CertificationCE EN 1078

Package Contents

Your SUPERIDE Bicycle Helmet package should include:

  • 1 x SUPERIDE Bicycle Helmet with integrated rechargeable rearlight

Setup and Wearing Instructions

Interior view of SUPERIDE helmet showing padding and adjustment dial.

Image: Interior view of the SUPERIDE helmet, highlighting the internal padding and the rear adjustment dial for head circumference.

1. Preparation for Wearing

  1. Check Integrity: Before each use, inspect the helmet shell, lining buffer layer, fixing system, and vent holes for any damage, loosening, or accumulation of stains. Ensure the lining is firmly installed.
  2. Adjust Head Circumference: Use the lightweight fit system's easy-to-turn dial at the back of the helmet to adjust the head circumference to your size.

2. Wearing the Helmet Correctly

  1. Positioning: Aim the helmet at your head to ensure full coverage and proper alignment.
  2. Lining Adjustment: Adjust the lining position to fit your head comfortably.
  3. Fasten Chin Strap: Securely fasten the chin strap and fix the buckle firmly. The helmet should be stable and not shake, and your field of vision should be unobstructed.

Operation

SUPERIDE helmet, grey, side view with rearlight illuminated.

Image: Side view of the SUPERIDE helmet in grey, showing the integrated rearlight illuminated for visibility.

Rearlight Operation

  • The integrated rearlight typically features multiple modes (e.g., steady, flashing).
  • To cycle through modes or turn the light on/off, press the power button located on the rearlight unit.
  • Note: Some rearlight models may reset to a default mode when turned off and on again. You may need to re-select your preferred mode after each power cycle.
  • Ensure the rearlight is charged regularly using the provided charging method (e.g., USB cable).

General Usage Guidelines

  • Strictly use the helmet in applicable scenarios (MTB, road cycling). Avoid hitting hard objects, touching sharp objects, or exposing it to corrosive chemicals.
  • When pairing with other cycling equipment, ensure that interfaces are firmly fixed and do not exceed load-bearing limits.
  • Do not place debris on the helmet, as this can affect balance and safety.

How to Remove the Helmet

  • Untie the buckle of the chin strap.
  • Gently remove the helmet upward to avoid pulling the webbing and interface.

Maintenance and Storage

1. Cleaning

  1. After Use: Clean any stains, dust, and debris from the helmet surface.
  2. Lining: Remove the inner lining and wash it with water and a neutral detergent. Reinstall after drying.
  3. Inspection: After cleaning, check the integrity of all parts. Replace any damaged parts promptly.

2. Storage

  1. Store the helmet in its own storage bag to prevent squeezing by other hard objects.
  2. Use soft cloth support inside the helmet to prevent deformation of the lining.
  3. If you have tactical accessories, store them separately to avoid wear on the helmet's surface.

3. Accessing the Helmet

  • When handling the helmet, hold the edges of both sides to avoid touching the top and interface parts, which could cause structural damage.
  • Always check the helmet's condition for any abnormalities before wearing it again.

Troubleshooting

  • Helmet feels loose: Ensure the chin strap is securely fastened. Use the rear adjustment dial to tighten the fit system until the helmet is snug but comfortable.
  • Rearlight not working: Check if the rearlight is charged. Connect it to a power source using the appropriate charging cable. If it still doesn't work, ensure the power button is pressed correctly.
  • Rearlight mode resets: This is a known characteristic for some rearlight models. Simply press the power button to cycle to your desired mode after turning the light on.
  • Helmet damaged after impact: Even if damage is not visible, the helmet's protective capabilities may be compromised. Replace the helmet immediately.

User Tips

  • Achieving a Perfect Fit: The helmet features a smooth-operating dial for head size adjustment. Take your time to fine-tune this for optimal comfort and safety.
  • Rearlight Modes: While the rearlight offers multiple modes, be aware that it might reset to a default mode when powered off and on. Plan to quickly select your preferred mode.
  • Padding Care: The inner padding is removable and washable. Regular cleaning will help maintain hygiene and comfort. For replacement pads, contact the manufacturer or seller.
  • Size Selection: For optimal safety and comfort, ensure you select the correct helmet size (M: 54-58cm, L: 58-62cm). A well-fitting helmet meets European standards for protection.

Certification

This SUPERIDE Bicycle Helmet is certified to meet the CE EN 1078 safety standard, indicating compliance with European safety requirements for cycling helmets.

CE Mark on helmet

Image: Close-up of the CE mark, indicating compliance with European safety standards.

Warranty and Support

For warranty information, technical support, or inquiries about replacement parts, please refer to the official SUPERIDE website or contact your retailer. Keep your proof of purchase for any warranty claims.

Additional Resources

A comprehensive user manual in PDF format is available for download. This document may contain additional detailed instructions and diagrams.

Download Full User Manual (PDF)

© 2023 SUPERIDE. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.