Erilles JS13 PRO TMR-JS13

Contents

K-SILVER JS13 PRO Anti-Drift TMR Electromagnetic Joystick User Manual

Model: TMR-JS13 | Brand: Erilles

1. Introduction

The K-SILVER JS13 PRO is an advanced TMR (Tunneling Magneto Resistive) Electromagnetic Joystick designed for repairing and upgrading various gamepad controllers. It utilizes cutting-edge TMR technology to provide superior performance, precise control, and extended durability, effectively eliminating common issues like joystick drift.

K-SILVER JS13 PRO+ TMR Electromagnetic Joystick for PS4

Figure 1: K-SILVER JS13 PRO+ TMR Electromagnetic Joystick for PS4, illustrating the joystick component and its integration into a controller.

2. Product Specifications and Features

2.1 General Specifications

Attribute Detail
Product Name JS13 TMR Magnetic Resistance Joystick
Brand Name Erilles
Model TMR-JS13
Interface Type USB (for controller connection)
Language English Version
Compatible Controllers PS4, PS5, Switch Pro, Xbox One, Xbox Series S/X
Origin Mainland China

2.2 Key Features

  • TMR Technology: Utilizes advanced Tunneling Magneto Resistive technology for enhanced performance, lower power consumption, and precise control.
  • Ultra-low Power Consumption: Features a customized low-power TMR chip with a single-chip power consumption as low as 200μA, ensuring zero jitter and quicker response.
  • High Resolution: Guarantees accurate communication of every subtle operation.
  • Linear Response: Provides a linear output voltage response within the specified range for precise operation and true feedback.
  • High Durability: Rigorously tested for stability in various extreme conditions, boasting a 5 Million Rotation Lifespan and 100 Million press switch life.
  • Eliminates Drift: Contactless magnetic induction operating principle completely eliminates physical wear and the resulting output drift issues.
  • Temperature Stability: Excels in temperature stability and supports flexible software-based calibration of the center point, featuring a minimal dead zone.
JS13 PRO TMR Magnetic Resistance Joystick features

Figure 2: JS13 PRO All-New Upgrade TMR Magnetic Resistance Joystick, highlighting features like 5 Million Rotation Lifespan, eliminates jitter, rock-solid stability, high response rate, and high resolution.

TMR Magnetic Sensing Principle Diagram

Figure 3: Diagram illustrating the High Precision Non-contact Magnetic Sensing Principle of the TMR joystick, showing a magnet and two TMR sensors with 12-bit high-precision digital processing.

2.3 TMR vs. Hall Sensor Comparison

JS13 PRO TMR vs JH13 Hall Sensor Comparison

Figure 4: Comparison table between JS13 PRO (TMR New generation sensor) and JH13 (Hall sensor), detailing service life, switch life, single-chip power consumption, and calibration methods.

3. Installation Instructions

Professional installation is recommended. Use anti-static equipment to avoid damaging the motherboard or other components. For detailed visual guidance, refer to the official user manual PDF available at this link.

Two K-SILVER JS13 PRO+ TMR Electromagnetic Joysticks

Figure 5: Two K-SILVER JS13 PRO+ TMR Electromagnetic Joysticks for PS4, as they appear out of the package.

  1. Open Packaging: Carefully open the product packaging and remove the new joystick.
  2. Disassemble Controller: Disassemble your gamepad controller according to its specific service manual. Locate the original joystick module.
  3. Remove Original Joystick: Carefully desolder and remove the original joystick from the controller's circuit board.
  4. Install New Joystick: Position the new K-SILVER JS13 PRO joystick in place and securely solder it to the circuit board.
  5. Reassemble Controller: Carefully reassemble your controller, ensuring all connections are secure.
  6. Verify and Calibrate: After reassembly, verify normal controller functionality. Calibration is essential for optimal performance (see Section 5.2 for calibration details).

4. Operating Instructions

Once installed and calibrated, the K-SILVER JS13 PRO joystick provides enhanced responsiveness and accuracy for your gaming experience. Its non-contact magnetic sensing principle ensures smooth, drift-free operation.

Person playing video game with controller

Figure 6: Image showing a person playing a video game with a controller, demonstrating the application of the joystick in gameplay.

5. Maintenance and Precautions

5.1 General Precautions

  • Confirm compatibility with your specific controller model before attempting installation.
  • Avoid applying excessive physical pressure to the joystick, as this may cause damage to the internal components or the controller itself.
  • Do not immerse the joystick or the controller in water or expose it to prolonged direct sunlight.

5.2 Calibration

Calibration is crucial for optimal performance and to prevent issues like drift or inaccurate centering. Always calibrate after installation or if you notice abnormal behavior.

  • For PS4/PS5: Open a dedicated calibration tool website in a computer browser (e.g., dualshock-tools.github.io or nagashock.com/calibrate) and follow the on-screen instructions.
  • For Switch Pro: After replacing the joystick, calibration is required through the Nintendo Switch console's system settings.
  • For Xbox One/Xbox Series S/X: Calibration can be performed directly on an Xbox console or a Windows PC with the official Xbox Accessories app installed.

6. Troubleshooting

Q: My controller does not recognize the joystick after installation.
A: First, verify that the joystick was installed correctly, ensuring all solder points are solid and connections are secure. If the installation appears correct, try restarting your console or PC.
Q: The joystick operates abnormally (e.g., drifting or inaccurate center point).
A: After successful installation, calibration is mandatory. If you experience drifting or an inaccurate center, perform the calibration steps outlined in Section 5.2 for your specific controller model.

7. Warnings & Safety Information

  • ATTENTION: Do not disassemble or modify the product beyond the intended installation process, as this may cause safety hazards and void any warranty.
  • ATTENTION: Always follow the installation and operation guidelines provided to avoid injury to yourself or damage to the product/controller.
  • ATTENTION: This product is specifically designed for the compatible controllers listed. Do not use it with other products.
  • ATTENTION: Installation and use should be performed under the direct supervision of an adult, especially when dealing with soldering and small components.
  • ATTENTION: The product contains small parts and must be kept out of the reach of children to prevent choking hazards.

8. User Tips

Tip 1: Double-Check Compatibility: Before purchasing and installing, always confirm that the JS13 PRO is compatible with your exact controller model. Refer to the product name, color, and product image, and if unsure, contact the seller for verification.

Tip 2: Anti-Static Precautions: When performing installation, especially during disassembly and soldering, use anti-static equipment (e.g., wrist strap, mat) to protect sensitive electronic components from electrostatic discharge.

Tip 3: Post-Installation Calibration: Remember that calibration is a critical step after installing the new joystick. Skipping this can lead to performance issues like drift. Follow the specific calibration instructions for your console.

General tips and pre-purchase information

Figure 7: Important tips for installation and usage, emphasizing professional handling.

9. Warranty and Support

For any questions, concerns, or assistance regarding the K-SILVER JS13 PRO Anti-Drift TMR Electromagnetic Joystick, please send an online message to the seller or contact the manufacturer directly.

9.1 Manufacturer Information

  • Company Name: Shenzhen Yinjie Technology Development Co., Ltd.
  • Address: 309B, Building C, No. 17 Yongxiang East Road, Ma'antang Community, Bantian Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China
  • Email: 3808939441@qq.com
  • Telephone: 86-15814653068

9.2 EU Authorized Representative

  • Company Name: MJCM SARL
  • Address: 78 avenue des Champs Elysees Bureau 326, PARIS, FR

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.