Introduction
The Eletechsup SMFSE24 is a versatile Schumann Generator designed to simulate Schumann resonance frequencies, ranging from 0.01Hz to 100000Hz. The primary Schumann resonance frequency, 7.83 Hz, is believed by some researchers to positively influence human health and well-being, potentially affecting cognitive functions, stress levels, and sleep. This device aims to provide these beneficial frequencies for various applications, including rehabilitation therapy and promoting relaxation.
Schumann resonances are natural electromagnetic frequencies occurring in the Earth-ionosphere cavity, primarily generated by lightning strikes. These frequencies are considered a fundamental electromagnetic rhythm of the Earth, often referred to as the 'Earth's heartbeat'.
The SMFSE24 offers advanced features such as adjustable frequency cycle outputs, a timing output function, and multiple audio outputs for enhanced versatility.
Safety & Warnings
Please read all instructions carefully before using this device. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
Specifications
| Feature | Description |
|---|---|
| Working Voltage | DC 5V |
| Working Power | 10W |
| Power Interface | Dual TYPE-C (use either one) |
| Default Frequency | 7.83Hz |
| Adjustment Range | 0.01Hz ~ 100000Hz Pure Sine Wave |
| Loop Output Frequencies | 1-10 settable cycles |
| Timer ON Range | 0-10000 seconds (0 = continuously on) |
| Timer OFF Range | 0-10000 seconds |
| Signal Voltage Amplitude | 3V |
| Audio Output | 4x 3.5MM AUX audio outputs with independent dedicated amplifiers |
| Onboard Antenna | 100MM Size onboard antenna |
| Dimensions (with shell) | 150mm * 108mm * 26mm |
| Weight (with shell) | 210g |
| Output Current | 0-20MA |
| Output Type | Quad |
Setup
- Power Connection: Connect the device to a DC 5V power supply using one of the dual TYPE-C charging ports. A standard mobile phone charger with a TYPE-C cable can be used.
- Placement: Place the generator in a suitable position where you intend to experience the Schumann Resonance signal.
- External Antennas (Optional): The mainboard has four 3.5mm audio interfaces, each with an independent signal amplifier. These can be used to connect up to four external 150MM antennas (e.g., ANTSC03) to create multiple signal transmission sources at the same frequency.
Operating Instructions
The SMFSE24 features encoder adjustments for setting parameters and an LCD display for real-time feedback.
- Frequency Adjustment: Use the 'Adj Frequency' encoder to set the desired output frequency within the 0.01Hz to 100000Hz range. The current frequency will be displayed on the LCD.
- Timing Function: The device includes a cyclic timing output function for users who do not require continuous signal output.
- Use the 'Adj Timer' encoder to adjust the 'ON Time' (output enable time) and 'OFF Time' (output disable time).
- Both 'ON Time' and 'OFF Time' are adjustable from 0 to 10000 seconds. Setting a value to 0 means continuous operation for that phase.
- The signal will enable or disable in a continuous cycle according to the times set.
- Multiple Outputs: The four 3.5mm AUX audio outputs allow for simultaneous output of the Schumann wave signal to multiple locations or devices, each with independent amplification.
Maintenance
- Before First Use: Remove all protective films from the device.
- After Each Use: Turn off the device and store it in a dry place.
- Regular Inspection: Inspect the product before each use. Do not use if any damage is observed.
- Cleaning: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive materials.
Troubleshooting
- Device not powering on: Ensure the TYPE-C power cable is securely connected to both the device and a functional 5V power source. Try a different TYPE-C cable or power adapter.
- No signal output: Check that the frequency is set correctly and that any connected external antennas or audio devices are properly plugged into the 3.5mm AUX ports. Verify that the 'ON Time' is not set to 0 if using the timing function, or that the device is currently in its 'ON' cycle.
- Unusual sounds or behavior: Disconnect the power immediately and inspect the device for any visible damage. If issues persist, contact customer support.
User Tips
- Sensitivity Considerations: Some individuals may be sensitive to Schumann resonance waves. The SMFSE24's adjustable timer function allows for personalized exposure.
- For extremely sensitive users, try setting the timer to: ON: 10 seconds, OFF: 50 seconds.
- For light-sensitive users, a setting of ON: 40 seconds, OFF: 20 seconds may be suitable.
- Exploring Healing Frequencies: This generator can be set to various frequencies known for their potential beneficial effects, such as the Solfeggio frequencies (174 Hz, 285 Hz, 396 Hz, 417 Hz, 432 Hz, 528 Hz, 639 Hz, 741 Hz, 852 Hz, and 963 Hz), often used in meditations and healing sessions.
- Water Resonance: The Schumann resonance can positively affect water, making it more resonant and potentially absorbed into cells faster, which may enhance self-healing capacity.
- Benefits for Living Organisms: Beyond humans, the Schumann resonance is believed to benefit animals and plants by improving cellular energy conversion, leading to better health and growth.
Warranty & Support
For detailed instructions, video tutorials, or any support inquiries, please contact the seller directly. A PDF user manual is also available for download:
Manufacturer: Guangzhou Keshen Electronic Technology Co., Ltd
EU Authorized Representative: TOCYA TRADING