BOJECHER D50 / D30-II / D10C Amplifier Board

Contents

DC 12V Bluetooth 5.0 Digital Audio Amplifier Board Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your new Digital Audio Amplifier Board. This amplifier board is designed for home theater, karaoke, and DIY audio projects, offering versatile connectivity options including Bluetooth 5.0, USB, TF card, AUX, and optical input. It features independent control for bass, treble, and master volume, along with dual microphone inputs for karaoke functionality. Please read this manual thoroughly before use to ensure proper operation and to maximize the performance of your device.

The amplifier board is available in several models (D50, D30-II, D10C) with varying features and power outputs. Refer to the specifications table for detailed differences between models.

2. Safety Information

  • Ensure the power supply voltage matches the requirements of the amplifier board (DC 12V-24V or AC 110V-240V, depending on the model).
  • Do not expose the device to water, moisture, or extreme temperatures.
  • Avoid opening the casing or attempting repairs yourself, as this may void the warranty and pose electrical hazards.
  • Keep out of reach of children.
  • Disconnect power before making any connections or disconnections.
  • The remote control does not contain batteries; please purchase them separately.

3. Package Contents

Please check the contents of your package. The exact items may vary slightly depending on the model purchased (D50 or D30-II).

D50 Amplifier Board Package Contents

D50 Amplifier Board Packing List

Image: D50 Amplifier Board Packing List

  • 1 x D50 Amplifier Board
  • 1 x Power Cable (EU/US plug, depending on region)
  • 1 x Speaker Wire
  • 1 x DC Line
  • 1 x Remote Control

D30-II Amplifier Board Package Contents

D30-II Amplifier Board Packing List

Image: D30-II Amplifier Board Packing List

  • 1 x D30-II Amplifier Board
  • 1 x Power Cable (EU/US plug, depending on region)
  • 1 x Speaker Wire
  • 1 x DC Line
  • 1 x Remote Control

4. Product Overview

Familiarize yourself with the various inputs, outputs, and controls on your amplifier board.

D50 Amplifier Board Layout

D50 Amplifier Board Front Panel Layout with Labeled Controls

Image: D50 Amplifier Board Front Panel Layout with Labeled Controls

  • MIC1/MIC2: Microphone inputs
  • ECHO: Microphone reverb adjustment
  • MIC VOL: Microphone volume adjustment
  • INPUT L/R: Audio input (AUX)
  • USB: USB drive input
  • TF: TF card slot
  • VOL: Overall volume adjustment
  • TREBLE: Treble adjustment
  • BASS: Bass adjustment
  • DIGITAL IN (OPTICAL): Optical fiber input
  • FMT +/-: Previous/Next song, Play/Pause
  • IR: Infrared receiver for remote control
  • LED: Power indicator light
  • DC POWER (ON/OFF): DC power switch (12V-24V)
  • AC POWER (ON/OFF): AC power switch (110V-240V)

D30-II Amplifier Board Layout

D30-II Amplifier Board Front Panel Layout with Labeled Controls

Image: D30-II Amplifier Board Front Panel Layout with Labeled Controls

  • MIC1/MIC2: Microphone inputs
  • ECHO: Microphone echo adjustment
  • MIC VOL: Microphone volume adjustment
  • INPUT L/R: Audio input (AUX)
  • USB/TF Input: USB drive and TF card slot
  • Display Screen: Digital display
  • VOL: Music volume adjustment
  • TREBLE: Treble adjustment
  • BASS: Bass adjustment
  • Last song/Vol-, Stop/Play, Next Song/Vol+: Playback controls
  • LED On/Off: LED indicator switch
  • AC Input: AC power input (110V-240V)
  • DC12V Input: DC power input (12V)
  • Power ON/OFF: Main power switch

5. Specifications

Parameter D50 D30-II D10C
Name Amplifier Board Amplifier Board Amplifier Board
Material Plastic + Metal Not specified Not specified
Working Voltage EU Plug: DC12V-24V AC 220V/50Hz; US Plug: DC12V-24V AC 110V/60Hz AC 110-220V or DC 12V 110V/220V/12V/24V
Rated Power 100W 30W (max 120W available) 30W (30W-120W available)
Output Power 100W-300W Not specified (matches rated power range) 30-120W
Size 17.5 * 8 cm 17.5 * 8 cm 175 x 80 x 50 mm
Colour Black Not specified Not specified
Speaker Opening Size 5 * 15.6 cm Not specified Not specified
Bluetooth Built-in (version not specified) Supported (version not specified) Supported (Version 5.0)
FM Radio Supported Not specified Supported
Audio Input AUX, TF Card, U Disk Bluetooth in/AUX in/USB/TF Card Bluetooth in/AUX in/USB/TF Card
Audio Output Not specified (matches speaker compatibility) 1 Bass and 1 Treble 1 Bass and 1 Treble
Microphone Dual input, adjustable reverb; supports Wireless Microphone Board (not included) Dual input Supported (dual input not specified)
Sound Adjustment Independent adjustment of treble, bass and master volume Independent adjustment of bass and treble Independent adjustment of bass and treble; heavy bass adjustment supported
Remote Control Not specified Not specified Supported
Battery Use Not specified Not specified Suitable for 12V lithium batteries (only 12V); chargeable with DC 12V
Speaker Compatibility 4-8 Ohm, power < 200W Not specified Not specified

Note: Due to manual measurements and slight color variations, please allow 1-3 cm (0.4-1.18 inches) difference. Item's color may be slightly different from pictures due to light and screen differences.

6. Functional Overview

All three amplifier board models support reading MP3 songs from TF cards and U disks, and have basic audio adjustment functions. The D50 model features higher rated power and output power, with adjustable master volume and built-in FM radio. The D30-II is compact with basic input/output functions. The D10C model supports multiple voltage inputs, Bluetooth 5.0 and remote control, and is compatible with 12V lithium batteries. Please refer to the parameter table for detailed differences.

Multipurpose Scenarios for Amplifier Board Connectivity

Image: Multipurpose Scenarios for Amplifier Board Connectivity

7. Setup Instructions

Follow these steps to set up your amplifier board:

  1. Speaker Connection

    Connect your speakers to the appropriate terminals on the amplifier board. For models with separate tweeter and subwoofer interfaces (e.g., D50), ensure correct connection.

    Internal Wiring Diagram for D50 Amplifier Board showing Tweeter and Subwoofer Interfaces

    Image: D50 Internal Wiring Diagram showing Tweeter and Subwoofer Interfaces. The blue socket is for the subwoofer, and the one next to it is for the tweeter.

    Internal Wiring Diagram for D30-II Amplifier Board showing Speaker and LED Connections

    Image: D30-II Internal Wiring Diagram showing connections to Bass Speaker, Treble Speaker, and LED Light.

  2. Power Connection

    Connect the appropriate power cable (DC 12V-24V or AC 110V-240V) to the amplifier board. Ensure the power switch is in the OFF position before connecting. The D10C model supports multiple voltage inputs.

  3. Microphone Connection

    If using microphones, plug them into the MIC1 or MIC2 jacks.

  4. Audio Input Connection

    Choose your desired audio source:

    • Bluetooth: Turn on the amplifier board, enable Bluetooth on your mobile device, search for the device name (e.g., "DA102"), and pair.
    • USB/TF Card: Insert a USB drive or TF card with MP3 songs into the respective slot. The amplifier will automatically switch to USB/TF mode.
    • AUX Input: Connect an external audio device (e.g., phone, computer, CD player) to the L/R AUX input jacks using an RCA to 3.5mm cable.
    • Optical Input (D50): Connect an optical cable from your audio source to the DIGITAL IN (OPTICAL) port. Use the remote control to switch to optical mode.

Setup Demonstration Video

Video: This video demonstrates the setup and basic operation of the amplifier board, including connecting speakers, power, testing microphones, pairing via Bluetooth, and adjusting controls.

8. Operating Instructions

  1. Power On/Off

    After all connections are made, switch the DC POWER or AC POWER button to the ON position. The LED indicator will light up.

  2. Volume Control

    Adjust the VOL knob to control the main audio volume. For microphone volume, use the MIC VOL knob.

  3. Tone Adjustment

    Use the TREBLE knob to adjust high frequencies and the BASS knob to adjust low frequencies to your preference.

  4. Microphone Echo (Reverb)

    Adjust the ECHO knob to add or reduce reverb effect for the microphones.

  5. Mode Switching

    Press the MODE button on the remote control or the corresponding button on the board (if available) to cycle through input modes (Bluetooth, USB, TF Card, AUX, Optical, FM).

  6. Playback Controls

    Use the FMT +/- buttons (or corresponding buttons on the remote) for previous/next track and play/pause functions when using USB, TF card, or Bluetooth modes.

  7. Remote Control Usage

    Point the remote control towards the IR receiver on the amplifier board to control functions such as power, mode, volume, and playback. Remember to install batteries in the remote control (not included).

9. Maintenance

  • Keep the amplifier board clean by wiping it with a soft, dry cloth.
  • Avoid using harsh chemicals or abrasive cleaners.
  • Ensure proper ventilation to prevent overheating.
  • Store in a cool, dry place when not in use for extended periods.

10. Troubleshooting

  • No Power: Check if the power cable is securely connected and if the power switch is ON. Verify the power source is active.
  • No Sound:
    • Ensure speakers are correctly connected and functional.
    • Check all volume controls (master, bass, treble) are not set to minimum.
    • Verify the correct input mode is selected (Bluetooth, AUX, USB, TF, Optical).
    • If using AUX, ensure the cable is fully inserted into both the amplifier and the source device.
  • Bluetooth Connection Issues:
    • Make sure the amplifier is in Bluetooth mode.
    • Ensure your device's Bluetooth is enabled and searching for devices.
    • Try unpairing and re-pairing the device.
    • Move your device closer to the amplifier.
  • Microphone Not Working:
    • Check if the microphone is properly plugged into MIC1 or MIC2.
    • Adjust the MIC VOL and ECHO knobs.
    • Ensure the microphone itself is functional.
  • Audio Comes and Goes / Intermittent Audio: Check all cable connections (power, speakers, audio input) for looseness or damage. Ensure the power supply is stable.

11. User Tips

  • For the D10C model, you can use 12V lithium batteries for portable operation, which can also be charged via the DC 12V input.
  • If you experience intermittent audio or volume issues, double-check all physical connections and ensure they are secure.
  • When using the remote control, remember that batteries are not included and need to be purchased separately.
  • This amplifier board is excellent for DIY projects, such as building a custom guitar amplifier or integrating into a home audio system.

12. Warranty and Support

This product comes with a standard manufacturer's warranty. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.