1. Introduction
The Diymore ESP32-S3 Development Board is a versatile module equipped with a powerful ESP32-S3 dual-core processor, offering robust performance for various applications. It features a 2.8-inch color screen, supporting either TFT or capacitive touch, and integrates Wi-Fi and Bluetooth connectivity. Designed for ease of development, it provides comprehensive interfaces and resources for both beginners and experienced users.
Key Features:
- Equipped with ESP32-S3 dual-core processor, clocked up to 240MHz for strong performance.
- 2.8-inch color screen with 240x320 resolution, supporting up to 262K colors (RGB666) for rich display.
- Supports capacitive touch (ES3C28P model) and standard TYPE-C interface for convenient interaction and stable power supply.
- Built-in microphone and support for external speakers for audio playback and voice capture.
- Multiple peripheral interfaces (IIC, UART, etc.) and a Micro TF card slot for expanded storage and flexible development.
- Includes RGB three-color indicator lights for comprehensive status indications.
- Supports external lithium batteries with built-in battery charge management circuitry for safe charging and discharging.
- Provides rich example programs, low-level driver technical support, and online Wiki updates.
- Module aging testing meets military-grade standards, ensuring long-term stable operation.
- Supports Xiaozhi AI voice chat functionality.
2. Package Contents
Please check the package contents upon receipt to ensure all items are present and undamaged. The package typically includes:
- 1x ESP32-S3 Development Board (ES3C28P with Touchscreen or ES3N28P without Touchscreen)
- 1x Terminal Wire (1.25mm to DuPont 2.54 Terminal Wire 4P 20cm)
- 1x USB-TypeC Cable (Power Cord)
- 1x Speaker (Optional, included with most kits)
- 1x Packing Box

3. Components Overview
Familiarize yourself with the various components and interfaces of the ESP32-S3 Development Board:

- ESP32-S3 Chip: The main processor.
- RGB LED: Multi-color indicator light.
- Speaker Port: Connector for external speaker.
- I2C Peripheral Port: Interface for I2C communication.
- Expansion Pins: General purpose input/output (GPIO) pins for connecting other modules.
- Microphone: Built-in microphone for audio input.
- RESET Button: Resets the ESP32-S3 module.
- TYPE-C Port: For power supply and program downloads.
- BOOT Button: Used for entering bootloader mode for flashing firmware.
- Battery Port: JST connector for external lithium battery.
- Serial Port: UART interface for serial communication.
- MicroSD Card Slot: For expanded storage.
- 2.8" LCD Display: 240x320 resolution screen, with capacitive touch on ES3C28P model.
4. Technical Specifications
4.1. General Module Specifications
| Feature | Description |
|---|---|
| Module | ESP32-S3 |
| CPU | Xtensa LX7 32-bit dual-core processor |
| Frequency | 240MHz (maximum) |
| Storage | 384KB ROM + 512KB SRAM + 16KB RTC SRAM + 16MB external QSPI Flash |
| Wi-Fi | 2.4GHz band, supporting 20MHz and 40MHz bandwidths |
| Bluetooth | Bluetooth V4.2 BR/EDR and Bluetooth LE standards |
| Power Interface | USB (Type-C) |
| Operating Voltage | 3.0-3.6V (Module), 5.0V (Electrical) |
| Working Temperature | -30°C to 80°C |
| Storage Temperature | -30°C to 80°C |

4.2. LCD Screen Specifications
| Feature | Description |
|---|---|
| Screen Size | 2.8 inches |
| Screen Type | IPS TFT |
| Resolution | 240xRGBx320 pixels |
| Active Display Area | 43.20 (W) x 57.60 (H) mm |
| Colors | Maximum: 262K (RGB666); Commonly used: 65K (RGB565) |
| Driver IC | ILI9341V |
| Display Interface | 4-Line SPI (connected to ESP32) |
| Pixel Size | 0.153 (H) x 0.153 (mm) |
| Viewing Angle | ALL 0'CLOCK |
| Backlight Type | 4 White LEDs |
| Backlight Brightness (Typical) | 280 cd/m2 |

4.3. Capacitive Touch Parameters (ES3C28P Model Only)
| Feature | Description |
|---|---|
| Active Area | 2.8 inches |
| Touch Screen Type | Capacitive Touch Screen |
| Touch Screen Resolution | 240 x 320 pixels |
| Driver IC | D-FT6336G |
| Visual Window Size | 45.20 (W) x 59.45 (H) mm |
| Communication Interface | IIC |
| Construction Material | ITO Film + ITO Glass |
| Backlight Brightness (with touchscreen) | 230 cd/m2 |

4.4. Battery Charging and Electrical Parameters
| Feature | Description |
|---|---|
| Charging Voltage Range | 4.2-6.5V (Typical: 5V) |
| Maximum Charging Current | 500mA |
| Module Actual Current | 290mA |
| Charging Saturation Voltage | 4.24V |
| Charging Temperature (Max) | 62°C |
| Rechargeable Battery Specification | 3.7V Lithium Polymer Battery |
| Backlight Current | 79mA |
| Backlight Brightness (No Touchscreen) | 270 cd/m2 |
| Total Current (ESP32 Reset) | 0 |
| Total Current (Display Only) | 140mA |
| Total Current (Display, Speaker, Battery Charging Active) | 560mA |
| Power Waste (Display Only) | 0.7W |
| Power Waste (Display, Speaker, Battery Charging Active) | 2.8W |

4.5. Product Dimensions
| Measurement | Value |
|---|---|
| LCD Screen Dimensions (excluding wiring and adhesive tape) | 50.00 ± 0.2 (W) x 69.20 ± 0.2 (H) x 2.3 ± 0.1 (D) mm |
| Touch Screen Dimensions (excluding wiring and adhesive tape) | 50.00 ± 0.2 (W) x 69.20 ± 0.2 (H) x 1.20 ± 0.1 (D) mm |
| Module Dimensions (with touchscreen) | 50.00 (W) x 86.00 (H) x 10.60 (D) mm |
| Module Dimensions (without touchscreen) | 50.00 (W) x 86.00 (H) x 9.10 (D) mm |


5. Setup Instructions
5.1. Initial Connection
- Power and Data: Connect the development board to your computer using the provided USB-TypeC cable. This will power the board and allow for program downloads.
- External Speaker: If using an external speaker, connect it to the designated speaker port on the board using the terminal wire.
- Battery (Optional): For portable applications, connect a 3.7V Lithium Polymer battery to the JST battery port. The board includes battery charge management.

5.2. Software Setup
To begin development, you will need to set up your development environment. This typically involves:
- Installing the ESP-IDF (Espressif IoT Development Framework) or Arduino IDE with ESP32 board support.
- Installing necessary drivers for the USB-to-Serial converter on your operating system.
- Referencing the official ESP32-S3 documentation and online WIKI materials for detailed programming guides and example programs.
6. Operation
6.1. Basic Operation
- Power On: Once connected via USB or battery, the board will power on.
- Display: The 2.8-inch LCD will activate, displaying your programmed interface.
- Touch Interaction (ES3C28P): If you have the capacitive touch model, interact with the screen by touching it.
- Audio: Use the built-in microphone for audio input and the external speaker for audio output as per your application.
- Status Indicators: Observe the RGB three-color indicator lights for various operational statuses.
6.2. AI Voice Chat (Xiaozhi AI)
The board supports Xiaozhi AI voice chat, enabling intelligent interaction:
- Connect to AI models for intelligent responses.
- Customize multiple roles for diverse interactions.
- Supports secondary development for advanced AI applications.
- Provides smart replies to various questions and multi-language support.



Video 6.1: Product Overview and Demonstration
7. User Tips
- The integrated microphone on the board opens up a whole new world of possibilities for voice-activated projects and audio processing.
- The battery implementation is convenient; simply attach a battery via the JST connection, and the board will automatically detect and operate from battery power when not connected to the USB port.
- Extensive documentation is available for this board. For programming and specific functionalities, refer to online resources and the provided user manual for detailed specifications.
- The included speaker is generally adequate for voice applications, such as creating a voice changer or simple audio playback.
8. Troubleshooting
8.1. Common Issues
- Touchscreen Not Responding (ES3C28P): If the touchscreen is not detected on the I2C lines or does not respond, verify all wiring connections, especially for the IIC interface. Check your software configuration and ensure the correct drivers are loaded. A persistent issue might indicate a faulty unit.
- Board Not Recognized by IDE / Display Issues: If your development environment (e.g., Arduino IDE, PlatformIO) cannot detect the board, or if the display shows artifacts like a red line, ensure the USB cable is functioning correctly and the board is properly powered. A red line through the screen often indicates a faulty display or a damaged unit.
- Incorrect Model Received: If you ordered a specific model (e.g., with touchscreen) and received a different one (e.g., no-touch), please contact your seller for assistance.
9. Maintenance
- Cleaning: Keep the module clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or abrasive cleaners.
- Environmental Conditions: Avoid exposing the board to extreme temperatures, high humidity, or corrosive environments outside its specified operating and storage ranges (-30°C to 80°C).
- Handling: Handle the board with care to prevent physical damage to components, connectors, or the screen. Avoid static discharge.
10. Warranty and Support
For detailed technical support, including underlying driver information, programming guides, and the latest updates, please refer to the official online WIKI materials provided by Diymore or the ESP32 community.
A comprehensive user manual in PDF format is also available for download. You can access it via the following link: Download User Manual (PDF)
For product-specific inquiries or issues not covered in this manual, please contact your retailer or the manufacturer's support channels.