YSRSAI YSR-CGD-RGB

Contents

YSRSAI Wall Touch COB LED Light Strip User Manual

Model: YSR-CGD-RGB

1. Introduction

Thank you for choosing the YSRSAI Wall Touch COB LED Light Strip. This product is designed to provide versatile and energy-efficient lighting for various indoor applications, featuring smart control options via Tuya WiFi, Amazon Alexa, and Google Home. This manual will guide you through the installation, operation, and maintenance of your LED light strip.

2. Safety Warnings

  • ATTENTION: Not suitable for children under three years of age.
  • Ensure the LED strip voltage matches the power supply voltage before connecting.
  • Do not expose the LED strip to water or moisture as it is not waterproof.
  • Avoid bending the strip sharply or applying excessive force, which may damage the internal circuitry.
  • Disconnect power before any installation, maintenance, or troubleshooting.

3. Package Contents

Please inspect the product for completeness upon unpacking. The standard package typically includes:

  • COB LED Light Strip (5M, 10M, or 20M depending on kit)
  • WT1 WiFi 2CH LED Controller
  • 24V LED Power Supply
  • Wall Touch Control Panel
  • Double-sided adhesive tape (pre-applied or separate)
Components of the 5M Strip Control Set
Figure 1: Typical components included in a 5M Full Kit, showing the COB LED strip, WT1 WiFi 2CH LED Controller, Wall Touch Control Panel, and 24V LED Power Supply.

4. Features

  • Smart Control: Compatible with Tuya WiFi, Amazon Alexa, and Google Home for APP and voice control.
  • High Brightness: Features COB LED technology for energy-efficient, high-brightness, and safe illumination.
  • Even Lighting: Provides soft and balanced lighting with no dark areas or light spots.
  • Flexible Design: Bendable and cuttable at designated marks for custom lengths and shapes.
  • Dimmable: Adjustable brightness and color temperature (Warm White, Natural White, Cold White).
  • Easy Installation: Equipped with double-sided tape for convenient mounting.
  • Long Lifespan: Average life of 50,000 hours.
Diagram illustrating bendable, soft, cuttable, and double-sided tape features of the LED strip
Figure 2: Key features of the COB LED strip, including its flexibility, uniform light output, ability to be cut, and double-sided adhesive for mounting.

5. Setup Guide

5.1 Physical Installation

  1. Prepare Surface: Ensure the installation surface is clean, dry, and smooth.
  2. Measure and Cut (if necessary): Measure the desired length for your LED strip. Cut only along the designated cutting marks on the strip.
  3. Attach Strip: Peel off the backing from the double-sided tape on the LED strip and firmly press the strip onto the prepared surface.
  4. Connect LED Strip to Controller: Connect the LED strip to the 'LED OUTPUT' terminals on the WT1 WiFi 2CH LED Controller, ensuring correct polarity (positive to positive, negative to negative).
  5. Connect Power Supply to Controller: Connect the 24V LED Power Supply to the 'DC IN' terminals on the WT1 WiFi 2CH LED Controller.
  6. Connect Wall Touch Panel: If using the wall touch panel, connect it to the appropriate terminals on the controller as per the wiring diagram.
  7. Plug in Power Supply: Plug the power supply into a suitable electrical outlet.

5.2 Smart Home Integration (Tuya App)

  1. Download App: Download the 'Tuya Smart' or 'Smart Life' app from your smartphone's app store.
  2. Register/Login: Create an account or log in to your existing account.
  3. Enter Pairing Mode: Power on the LED strip. The controller should enter pairing mode (often indicated by a rapidly blinking light). If not, press and hold the 'RUN/RESET' button on the controller for 5 seconds until it blinks rapidly.
  4. Add Device: In the Tuya app, tap '+' to add a new device. Select 'Lighting' > 'Strip Lights (Wi-Fi)'.
  5. Connect to Wi-Fi: Follow the in-app instructions to connect the device to your 2.4GHz Wi-Fi network. Ensure your phone is also connected to the same 2.4GHz network.
  6. Control: Once successfully added, you can control the LED strip via the Tuya app.

5.3 Voice Control Setup (Alexa/Google Home)

  1. Link Tuya Account: In your Amazon Alexa or Google Home app, navigate to 'Skills & Games' (Alexa) or 'Works with Google' (Google Home). Search for 'Tuya Smart' or 'Smart Life' and enable the skill/service.
  2. Link Accounts: Log in with your Tuya Smart/Smart Life account credentials to link the accounts.
  3. Discover Devices: Once linked, ask Alexa or Google Assistant to
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.