1. Important Safety Instructions
Thank you for purchasing the projector. Please read this manual thoroughly before using and keep it for future reference. If physical injury, loss of data, or damage is caused by failure to follow instructions, the warranty does not apply.
Set Up
- Do not install the projector in places without proper ventilation.
- Do not install the projector in hot and humid places.
- Do not install the projector in dusty or smokey places.
- Do not block the ventilation holes (intake or exhaust).
- Do not install the projector near temperature and smoke detectors. It may cause a sensor failure.
- Do not install the projector in areas where warm and cool air will blow directly onto the projector, otherwise it may cause projector failure due to moisture condensation or large temperature changes.
Power Supply
- Power off the device before removing the power supply from the socket.
- Use the power cord with caution to avoid unduly bending it. Damaged power cords may cause electric shock or fire.
- Unplug this device if there are lightning storms or when unused for a long period of time.
- Never touch the power cable or the power connection with wet hands.
- Unplug the power cord from the outlet after using the projector.
Repairs
- Never make any repairs to the projector yourself.
- No components in the projector can be repaired by customers.
- Please entrust qualified professional maintenance personnel for repair.
Caution
- Do not look at the lens or it may cause severe eye injury.
- During and after use, the temperature near the air outlet will rise, therefore, touching it may cause burns.
- Do not place projector in too warm or too cold room, because high temperature or low temperature will shorten the lifespan of the device. The working temperature would better be 5°C-35°C.
2. Packing List
Ensure all items are present in the package:
- Projector
- Remote Control (Batteries not included)
- HDMI Cable
- AV Cable
- Power Cable
- User Manual (this document)
Figure 2.1: Included accessories in the package.
3. Product Overview
Familiarize yourself with the projector's components and interfaces.
Figure 3.1: Front and rear view of the projector with labeled ports and features.
- Lens cap
- Camera
- IR receiver (front)
- IR receiver (rear)
- AV interface
- 3.5mm port for audio output
- HDMI port
- USB port
- WAN port
- Speaker
- Power interface
4. Remote Control
The remote control allows for convenient operation of the projector. Batteries are not included.
Figure 4.1: Layout of the remote control buttons.
- Power Switch
- Direction Button
- Confirm Button (OK)
- Menu Button
- Volume+
- Volume-
- Signal Source
- Home Button
- Back Button
- Mouse Mode
- Lens Forward (Focus adjustment)
- Lens Backward (Focus adjustment)
- Mute
Note: For some applications or websites, you may need to switch to mouse cursor input action.
5. Setup
5.1 Projector Placement
The projector can be installed in various configurations:
Figure 5.1: Projector placement options.
Ceiling Installation:
- Purchase a universal projector ceiling mount.
- Remove the four rubber pads on the bottom of the projector to reveal the screw holes.
- Use M4*10mm screws for installing the ceiling mount, then attach the projector.
Figure 5.2: Ceiling mount screw hole locations.
Note: During installation, do not operate with electricity. Maintain a gap of at least 30 cm from walls for ventilation. If ceiling-mounted with a screen, the projector cannot be higher than the upper edge of the screen to avoid image distortion.
5.2 Power On
- Plug the power cord into an outlet.
- Take off the lens cover.
- Press the power button on the projector or remote control to turn it on.
Figure 5.3: Powering on the projector.
5.3 Projector Distance & Size
The recommended projection screen size is around 100 inches with a projection distance of approximately 9.2 ft. Ambient darkness will improve the clarity of projected images.
Figure 5.4: Recommended projection distances for various screen sizes.
| Distance | Screen Size (Inches) |
|---|---|
| 4.55 ft (1.39 m) | 50 |
| 7.37 ft (2.25 m) | 80 |
| 9.2 ft (2.81 m) | 100 |
| 11.07 ft (3.38 m) | 120 |
| 13.82 ft (4.22 m) | 150 |
| 18.4 ft (5.63 m) | 200 |
5.4 Adjusting the Projected Image (Autofocus)
The projector features automatic image adjustment capabilities:
- Manual Focus Adjustment: If the image is unclear after adjusting size and distance, press the remote control's F+/F- buttons to fine-tune the focus until a clear image is obtained.
- Auto Obstacle Avoidance:
- Use the Direction button on the remote or projector to navigate to the settings icon and press OK.
- Select the projection method icon, press OK, then select "Automatic obstacle avoidance" in the "Projection" column. The projector will automatically avoid obstacles by refocusing (the display screen will shrink).
- Auto Access Screen:
- Enter the settings menu as described above.
- Select the projection method icon, press OK, then select "Auto access screen" in the "Projection" bar.
- Select "START". The screen size will be adjusted to fit the screen after the projector refocuses.
Attention: When using auto access screen, ensure all corners of the screen are within the projection area. After zoom setting, Auto Trapezoid will be turned off.
- Four-point Keystone Correction (Horizontal and Vertical):
- Enter the setting interface using the remote or projector buttons.
- Select the projected image settings, press OK, select "Auto Trapezoid" in the "Projection" column, and turn off "Auto Trapezoid" to enter manual adjustment mode.
- Select "Point Trapezoid" and press OK. Use the direction buttons to adjust the projected image corners. Press OK to move to the next corner.
- After adjusting all four points, press the return key to save the current state.
Figure 5.5: Automatic image adjustment features.
6. Operating Instructions
6.1 Input Source
Connect external devices using the available input ports:
- HDMI Mode:
- Connect the projector and equipment with an HDMI cable.
- Press and hold the <Source button> on the projector or remote control to enter the input source interface and select HDMI.
- Select the corresponding HDMI input (HDMI1 or HDMI2) and press OK. Press the return key to exit.
- AV Mode:
- Connect the projector and equipment with an AV cable.
- Press and hold the source button on the projector or remote control to enter the input source interface.
- Select AV and press OK. Press the return key to exit.
- USB Mode:
- Connect a USB disk to the projector. The USB disk will be highlighted on the main interface.
- Select the corresponding file type (Movie, Music, Picture, Office Suite) and press OK to access the files.
Figure 6.1: Input/Output ports and compatible devices.
6.2 WiFi Settings
- Use the remote control or projector button to enter the setting interface.
- Find <NETWORK> in the setting interface, press OK to enter the WIFI setting.
- Press OK to turn on WIFI. A list of available WIFI networks will appear.
- Select the desired WIFI network, press OK to display the virtual keyboard.
- Use the remote control to enter the password. Place the control cursor on [Finish] and press OK to complete the password input.
6.3 Screen Mirroring
The projector supports screen mirroring from various devices:
- For iOS Devices (Streaming using WiFi):
- Connect the projector to WiFi (refer to 6.2). Ensure your iPhone and projector are on the same WiFi network.
- On the projector's main menu, use the remote control to select the settings icon and then the WIFI option.
- On your iOS device, slide up to enter the options interface, click the Screen Mirroring icon, select the projector name (e.g., Eshare-xxxx), and click Connect.
Note: This enables screen mirroring over WiFi, not iOS device data.
- For Android Devices (Streaming with WiFi):
- Connect the projector to WiFi (refer to 6.2). Open the main menu of the projector and select the Eshare icon, then press OK.
- Scan the Eshare QR code displayed on the projector with your mobile device to download the Eshare app.
- After installation, open the Eshare app on your mobile device and use the one-click screen sharing function.
Note: The mobile device and the projector should be connected to the same WiFi network.
- For Windows PC (Wireless Miracast support Window 7/8/10 system):
- Connect the projector to WiFi (refer to 6.2). Ensure your PC and projector are on the same WiFi network.
- On your computer, open a web browser and go to http://h.eshare.app. Select the "Eshare for Windows" option to download.
- After the download is complete, open the EShare app, select one-click screen sharing.
6.4 Bluetooth Connection
The projector can connect to external speakers or a smartphone/tablet via Bluetooth.
- To External Speakers:
- Use the remote control or projector button to enter the setting interface.
- Find Bluetooth settings, press OK to enter, then select "Add accessory". A list of Bluetooth devices will be displayed.
- Select the Bluetooth speaker from the list to connect, then press OK to pair.
- After successful connection, it will show "Connected" on the Bluetooth device.
- To a Phone (as a Bluetooth Speaker):
- Use the remote control or projector button to move the cursor to "APPS" on the main interface.
- Move the cursor down to the Bluetooth icon under "My apps" and press OK to enter the Bluetooth connection interface.
- Turn on Bluetooth on your mobile phone, find the projector's Bluetooth name ("Projector"), and click to pair.
6.5 APP Download
You can download additional applications to your projector:
- Find the "APPS" icon on the projector's main menu page using the remote control direction keys.
- Move the cursor down to the "APP Store" icon and press OK to enter.
- Click the search icon to find and download the desired app.
Figure 6.2: Navigating the APP Store on the projector.
7. Specifications
Detailed technical specifications for the XIWBSY X06 Projector:
| Feature | Specification | Feature | Specification |
|---|---|---|---|
| Display Technology | LCD | Light Source | LED |
| Aspect Ratio | 16:9/4:3/Auto | Focus | Manual / TOF Focus |
| Keystone Correction | ±30° (Auto Correction) | Projection Mode | Front / Rear / Ceiling / Throwing |
| Built-in Speaker | 10W*2 (20W total, DTSX, DSP Tech) | Power Supply | AC100-240V, 50/60HZ |
| Unit Dimensions (L*W*H) | 246*207*169 mm | Unit Net Weight | 3.5kg |
| Photo Format Supported | JPG/JPEG/PNG/BMP | Audio Format Supported | MP3/AAC/FLAC/OGG/WAV/WMA/MID/DTS/M4A |
| Video Format Supported | 3GP/AVI/FLV/MP4/MPG/VOB/TS/M2TS/RMVB/MKV | Ports | HDMI *1 / USB 2.0 *1 / Audio in*1 / AV out*1 / WAN |
| Ansi Lumens | 3500 | Brightness | 50000 Lumens |
| Optical Resolution | 1920x1080dpi | Support | 4K, 8K decoding |
| System | Android 12.0 | CPU | A53*4 |
| Storage | 2 GB RAM + 128 GB ROM | Bluetooth | Bluetooth 5.4 |
| 3D Support | Red and Blue 3D MKV format | Life | >60,000 Hrs |
| Languages | 23 languages including Chinese, English, etc. | Home Theater Projector | Yes |
Figure 7.1: High-quality display features.
Figure 7.2: Integrated speaker system with DTSX and DSP technology.
8. Troubleshooting
Q1. Blurry Image
- Make sure the projection distance is farther than the minimum projection distance of 1.3 m.
- Adjust the focus ring (Lens Forward/Backward buttons on remote).
Q2. The projector image shows no signal
- Please make sure all cables are connected to the projector properly and stably.
- Check whether the projector input source mode has been selected as the corresponding format. For example, if connected via HDMI, the HDMI input channel must be selected.
Q3. Remote Unresponsive
- Make sure the remote points directly at the IR receiver.
- Do not cover the IR receiver.
- Try a new pair of AAA batteries.
Q4. The projector stops automatically after a period of time
- Check if the projector's air inlet and outlet are blocked by other objects.
- Please pay attention to whether the local mains voltage is too low or too high or fluctuates too much.
9. User Tips
Based on user experiences, here are some helpful tips:
- For optimal audio playback, consider installing a third-party media player like VLC, as the basic player might not support all audio formats.
- The projector features highly effective automatic setup functions, including auto-focus, keystone correction, and screen zoom, minimizing manual adjustments.
- While the projector offers excellent picture and video clarity, even in ambient light, please note that Netflix L1 certification is not supported, which may affect streaming quality for some content.
- The projector utilizes an LED light source, not an RGB laser.
10. Warranty and Support
Please refer to the "Important Safety Instructions" section (Section 1) for conditions that may affect your product warranty. Any internal repairs should only be performed by qualified professional maintenance personnel to avoid voiding the warranty and ensuring safe operation.
For comprehensive details and further assistance, you can refer to the full user manual PDF available here.