1. Introduction
Thank you for choosing the ZODOLAMP UFO LED High Bay Light. This industrial-grade lighting fixture is designed for high-performance illumination in large spaces such as warehouses, factories, stadiums, and garages. Featuring a robust die-cast aluminum body, IP65 waterproof rating, and efficient heat dissipation, this lamp provides super bright and reliable lighting. This manual provides essential information for the safe installation, operation, and maintenance of your new light.
2. Important Safety Instructions
DANGER:
- The edges of the product are sharp. Be careful not to scratch your hands during handling and installation.
ATTENTION:
- Do not scratch your hands.
- Please check if the magnetic attraction is normal during use to prevent the tool from slipping off. (Note: This instruction may be generic; ensure all mounting hardware is securely fastened for this light fixture).
- Please check if the screws and other accessories are tightened before and after installation.
- Ensure the power supply is disconnected before any installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
This product complies with CE, FC, and RoHS standards.
3. Setup and Installation
The ZODOLAMP UFO LED High Bay Light is designed for pendant mounting. Ensure the mounting surface or structure can safely support the weight of the fixture.
- Unpacking: Carefully remove the light fixture and all components from the packaging. Inspect for any damage.
- Power Disconnection: Ensure the main power supply to the installation area is turned off at the circuit breaker.
- Mounting:
- Attach the provided hanging chain to the integrated mounting ring on top of the fixture.
- Securely attach the other end of the chain to a suitable ceiling hook or mounting bracket capable of supporting the fixture's weight.
- Wiring:
- Connect the fixture's power cable to the main electrical supply (220V AC). Ensure proper polarity (Live, Neutral, Ground) according to local electrical codes.
- All electrical connections must be secure and insulated.
- Final Check: Verify all connections are secure and the fixture is safely suspended.


4. Operating Instructions
Once installed and wired correctly, operating the ZODOLAMP UFO LED High Bay Light is straightforward:
- Ensure all safety checks have been completed.
- Restore power to the circuit at the breaker.
- Turn on the light using the wall switch or control system connected to the fixture.
This fixture is not dimmable. It operates at full brightness when powered on.
5. Maintenance
The ZODOLAMP UFO LED High Bay Light is designed for durability and minimal maintenance. However, periodic checks and cleaning can ensure optimal performance and longevity.
- Cleaning:
- Before cleaning, always disconnect power to the fixture.
- Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or optical components.
- The integrated sealed lamp body is designed to be dust-proof, moisture-resistant, and insect-proof, reducing the need for internal cleaning.
- Inspection:
- Periodically inspect the hanging mechanism and electrical connections for any signs of wear, corrosion, or loosening.
- Ensure all screws and accessories remain tightened.

6. Troubleshooting
If you encounter issues with your ZODOLAMP UFO LED High Bay Light, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring; Faulty switch. | Check circuit breaker; Verify all electrical connections; Test the switch. |
| Light is flashing or flickering | Unstable power supply; Loose connection; Incompatible dimmer (though this unit is non-dimmable, external factors can cause flicker). | Ensure stable 220V AC supply; Check all wiring connections; Consult an electrician. |
| Fixture becomes excessively hot | Poor ventilation; Overvoltage; Internal component issue. | Ensure adequate airflow around the fixture; Verify input voltage; Discontinue use and contact support if overheating persists. |
| Power consumption seems lower than stated | Variations in manufacturing; Measurement discrepancies; Power regulation. | While some variation is normal, if performance is unsatisfactory, contact support. |
For issues not listed or if problems persist, please contact customer support.
7. Specifications
| General | |
|---|---|
| Brand | ZODOLAMP |
| Model | 004 |
| Product Name | High-power mining lamp / UFO LED High Bay Light |
| Batch/Serial Number | DS01 |
| Use | Industrial (Tunnels, construction sites, factories, gymnasiums, supermarkets, warehouses, stadiums, garages) |
| Origin | Mainland China |
| Certifications | RoHS, LVD, CE, FC |
| Electrical & Lighting | |
| Power Source | AC |
| Voltage | 220V |
| Power Options | 100W, 150W, 200W |
| Light Source | LED bulbs |
| Bulbs Included | Yes |
| Dimmable | No |
| Luminous Flux | 60-249 Lumens (varies by wattage) |
| Physical | |
| Material | Die Casting Aluminum |
| Waterproof Grade | IP65 |
| Dimensions (Approx. for 100W) | Diameter: 205mm |
| Package Dimensions | 28 cm (L) x 28 cm (W) x 6 cm (H) |
| Package Weight | 0.86 kg |


8. User Tips
- Power Consumption: Some users have noted that the actual power consumption may stabilize at a lower wattage than initially stated after a few minutes of operation. If precise power consumption is critical for your application, consider using an energy meter to verify the actual draw.
- Performance Monitoring: Pay attention to the light's performance. If you observe persistent flashing, flickering, or excessive heat, refer to the troubleshooting section and contact support if necessary.

9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your seller or the manufacturer directly. Please have your model number (004) and batch/serial number (DS01) ready when contacting support.
Manufacturer Information:
- Company: Zhongshan Kuzhimi Technology Co., Ltd
- Tel: 86-17728378089
- Mail: 2481653770@qq.com
- Address: A309, Building 1, Jiapule Technology Park, No. 8, Qianjin 2nd Floor, Tanzhou Town, Zhongshan City, Guangdong Province
Importer Information:
- Company: Yunfu Xingyu Trading Co., Ltd
- Address: A309, Building 1, Jiapule Technology Park, No. 8, Qianjin 2nd Floor, Tanzhou Town, Zhongshan City, Guangdong Province
An additional user manual in PDF format may be available for download from the seller's product page or directly from the manufacturer: View User Manual (PDF).