1. Setup
1.1 Charging Your Watch
Before initial use, fully charge the battery. It is recommended to use a conventional charger with an output of 5V or higher. Avoid using a computer's USB interface for charging.
- Place the magnetic charger onto the magnetic charging points located on the back of the watch.
- The watch screen will display charging progress.
- Once fully charged, remove the charger.

1.2 Install the Companion App
To unlock the full functionality of your R60 Smartwatch, you need to install the companion app on your smartphone. The app is named 'Dafit'.
- Download the app from the Apple App Store (for iOS devices) or Google Play Store (for Android devices).
- Alternatively, scan the QR code below to directly download the app.

1.3 Device Binding
After installing the app, follow these steps to bind your smartwatch:
- Open the Da Fit app on your smartphone.
- Navigate to the device binding section.
- The app should prompt you to connect to the watch. Click 'Pair' when prompted.
Important Hint for Message Push:
- APP-Device-Push Message: Open the app and enable push messages for desired applications.
- Ensure the app is running in the background. Refer to the 'APP-My-Background Running Protection Guide' within the app for detailed steps.
- Enable notification rights for the app. Refer to 'APP-Device-Message Push-Notification Rights-Allow app' for guidance.
Important Hint for Bluetooth Connection (iOS Users):
- For iPhone users, manually open Phone Settings > Bluetooth > Device Details and enable sharing system notifications.
- If the app does not prompt for Bluetooth pairing, go to your phone's Bluetooth settings, find the watch, and connect.
- If your iPhone was previously connected to this watch via Bluetooth and you are re-binding, go to 'Mobile Phone - Settings - Bluetooth', tap on the watch's Bluetooth device, and select 'Ignore Bluetooth' before attempting to bind again.
2. Operating Your Watch
2.1 Watch Controls
Function Button
- **Press:** Wake the screen, return to the home screen, or enter the menu interface.
- **Hold:** Enter the sport interface.
Power Button
- **Press:** Wake the screen, return to the previous interface, or turn off the screen on the main dial interface.
- **Hold:** Power on/off the watch.
Touch Screen
- **Hold the home screen:** Change the watch face.
- **Swipe:** Navigate to different interfaces.
- **Tap:** Enter a function.
- **Swipe right:** Return to the previous interface.

2.2 Watch Features and Settings
Display Settings
- **Brightness:** Adjust the watch's screen brightness.
- **Sleep:** Configure the screen-on duration to your preference.
- **Watch Face:** Customize the dial display. There are 6 built-in options, and more can be downloaded via the app.

Menu View
Choose your preferred display style for the master menu. There are 8 options available.
Wrist Raise
Enable this feature to automatically wake up the watch screen when you raise your wrist.
Vibrate & Ring
- **Mode:** Set the alarm mode for notifications to vibration only, vibration & ringing, or mute.
- **Intensity:** Adjust the vibration intensity (strong or soft).
DND Mode (Do Not Disturb)
Enable this mode to disable notifications for messages and incoming calls.
Screen Notification
Choose to turn on the screen when a new notification arrives.
Low Power Mode
Activate this mode to save battery. It will disable vibration and the 'turn wrist to bright screen' function, and reduce screen brightness.
Phone Call
Enable or disable the function of answering calls directly on the watch.

Language
Switch the language displayed on your watch.
Screen Clock
- **Screen Clock switch:** Turn on/off the screen display clock.
- **Analog clock:** Choose to display an analog clock.
- **Digital clock:** Choose to display a digital clock.
E-Card
Upload QR codes of social applications in the app to conveniently add friends.
Health Monitoring
- Heart Rate Monitor: Real-time monitoring of heart rate.
- Blood Oxygen Monitor: Real-time monitoring of blood oxygen levels.
- Sleep Monitor: Tracks deep sleep, light sleep, REM, and awake times.
- Blood Pressure Monitor: Carry-on blood pressure management.
- Stress Monitor: Helps track stress levels.



Activity Tracking
- Steps Tracker: Counts your daily steps.
- Distance Tracker: Measures distance covered.
- Calorie Tracker: Estimates calories burned.
- Activity Tracker: Monitors various activities.
Other Functions / Rich Gadgets
- Voice assistant built-in
- Built-in compass
- Alarm clock
- Calculator
- Find mobile phone
- Brightness adjustment
- Games
- Timer
- Remote camera control
- Music control
- Smart reminders
- Weather display
- Women's health tracking


3. Maintenance
3.1 Cleaning and Drying
- If your watch gets wet, clean and dry it thoroughly before putting it back on your wrist.
- Ensure your skin is dry before wearing the watch.
3.2 Wearing Instructions
- Do not wear your watch too tightly.
- Prolonged rubbing and pressure may irritate the skin. Give your wrist a break by removing the watch regularly.

4. Troubleshooting
4.1 Connectivity Issues
- Watch not connecting to phone: Ensure the watch is charged and within 10 meters of your phone. Refresh the app interface. For iOS, check Bluetooth settings and 'Ignore Bluetooth' if previously paired.
- Bluetooth call function not working: Ensure the watch is properly paired via the app and your phone's Bluetooth settings. For iOS, enable sharing system notifications in Bluetooth device details.
4.2 Notification Problems
- Not receiving notifications: Verify that the companion app is running in the background and has notification rights enabled for the desired applications. Check DND mode settings on the watch.
4.3 Watch Malfunction
- Watch unresponsive: Try restarting the watch via the 'System' settings in the app or by holding the power button.
- Persistent issues: Perform a factory reset. Note that this will delete all your data and settings.
5. Specifications
| Feature | Specification |
|---|---|
| Model | R60 |
| CPU Model | Realtek8763EWE-VP |
| FLASH | 640KB |
| Display Screen | 1.96-inch AMOLED, 410*502 HD Resolution |
| Screen Material | Amoled Glass |
| Dial Window Material Type | Coated Glass |
| Bluetooth Version | 5.3 |
| Appearance Size | Φ45.5*11.9 mm |
| G-Sensor | STK8325 |
| Battery Capacity | 800mAh (>450mAh) |
| Battery Life | 8 days (Usage time), 25 days (Standby time) |
| Charging Voltage | 5V |
| Charging Time | 2.5 hours |
| Waterproof Grade | Life Waterproof (10M) |
| Strap Width | 22mm |
| Band Length | 230mm |
| Weight | 26.5g |
| Operating Temperature | -10°C to 40°C |
| Compatibility | Android Wear, iOS (All Compatible) |
| Supported Languages | English, German, French, Italian, Spanish, Portuguese, Russian, Arabian, Indonesian, Malaysian, Thai, Simplified Chinese, Bulgarian, Hebrew, Turkish, Ukraine, Japanese, Persian, Serbian, Croatian, Slovenian, Greek |
| Certifications | CE, FCC, RoHS |
| Accessory Type | Strap*2, Charging Cable*1 |


6. Warranty & Support
6.1 Safety Information
Some individuals may experience skin reactions due to materials used in watches. This can be caused by allergies, environmental factors, or prolonged exposure to irritants like sweat and soap. If you have known skin allergies, exercise caution when wearing the watch.
6.2 Additional Resources
A detailed user manual in PDF format is available for download. Please refer to the product page or contact customer support for the link to the PDF manual.
7. User Tips
- The screen quality and overall build of the R60 smartwatch are highly praised for its price point.
- Users report good battery life, often meeting or exceeding expectations.
- The watch is noted for its attractive appearance and good quality feel.
- When setting up notifications, ensure all necessary permissions are granted to the companion app for optimal performance.
- If you have an iPhone 16 Pro Max, the watch should connect, but always ensure all app and phone settings for Bluetooth and notifications are correctly configured.