Introduction
Thank you for purchasing the Nordic Novelty Design Floor Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lamp. Please read these instructions carefully before use and retain them for future reference.
Important Safety Information
- Always disconnect the power supply before installation, cleaning, or maintenance.
- Do not install in damp or undried environments.
- Wear gloves during installation and operation to prevent injury.
- Ensure all connections are secure and properly insulated with electrical tape to prevent electric shock.
- This product is designed for indoor use only.
- Keep out of reach of children and pets.
Setup and Installation
Tools Required:
- Gloves
- Screwdriver
- Voltage Tester
- Wrench
- Electric Hammer
- Electrical Tape
- Wire Nuts
- Expansion Bolt
Installation Instructions:
- **Position Mounting Bracket:** First, correctly position the mounting bracket on the ceiling before drilling holes.
- **Secure Mounting Bracket:** Fix the mounting bracket to the ceiling in the appropriate position, then securely attach the base to the mounting bracket. Ensure the mounting bracket is installed securely.
- **Wiring:** Check that the power cord is intact and undamaged. Connect the lamp's wires to the main electrical wires. (Red = Live Wire, Blue = Neutral Wire). Use wire connectors and wrap securely with electrical tape to prevent electric shock.
- **Install Ceiling Plate/Base:** Install the ceiling plate/base, tightening the nuts and screws securely.
- **Install Remaining Parts:** Install the remaining parts according to the lamp body diagram.
- **Test Electricity:** Adjust the lamp body and test the electricity. Ensure the LED bulbs are fully installed before conducting the electrical test.
Operating Instructions
The Nordic Novelty Design Floor Lamp features a unique liftable and rotating design, allowing for versatile lighting adjustments.
- **Power On/Off:** Use the integrated button switch to turn the lamp on or off.
- **Adjust Height:** Gently slide the lamp body up or down along its suspension cable to adjust the height.
- **Rotate Light Disc:** The light-emitting disc can be rotated to direct light as desired, providing ambient or task lighting.
Maintenance
- **Cleaning:** Ensure the lamp is disconnected from the power supply before cleaning. Wipe the lamp body and shade with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- **Bulb Replacement:** This lamp uses integrated LED bulbs. Do not attempt to replace the bulbs yourself. If the light source fails, please contact customer support.
Troubleshooting
Common Issues and Solutions:
- **Lamp does not light up:**
- Check if the power cord is securely plugged into the outlet.
- Verify that the wall switch or circuit breaker is on.
- Ensure all wiring connections are correct and secure as per installation instructions.
- **Light flickers:**
- Check for loose wiring connections.
- Ensure the voltage supply is stable and within the specified range (90-260V).
If you encounter any issues not listed here or if problems persist, please contact customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | T-A-001 |
| Brand Name | TAONUANSHU |
| Item Type | Floor Lamps |
| Style | Modern Style |
| Material | Metal (Iron) |
| Finish | Plated |
| Shade Type | Iron |
| Light Source | LED bulbs (included) |
| Wattage | 6-10W |
| Voltage | 90-260V |
| Luminous Flux | 2000-82000 |
| Lighting Area | 3-5 square meters |
| Number of Light Sources | 1 |
| Installation Method | Assembly |
| Switch Type | BUTTON SWITCH |
| Shade Direction | Down |
| Is Dimmable | No |
| Is PCBA Included | Yes |
| Certifications | VDE, UL, SAA, RoHS, pse, LVD, GS, FCC, EMC, CQC, CE, CCC |
| Origin | Mainland China |
User Tips
- **Remote Control:** If your lamp includes a remote control and it's not functioning, check the battery. Some users have reported issues with specific remote buttons, but the lighting itself is generally well-received.
- **Power Cord Length:** The power supply is designed to provide sufficient power for a 5-meter length, offering flexibility in placement.
- **Lamp Warmth:** The lamp may become warm during operation, but it should not be excessively hot. This is considered normal.
Warranty and Support
This product comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use.
For any questions, technical support, or warranty claims, please refer to the official user manual PDF for detailed contact information or reach out to the seller directly.
A user manual in PDF format is available for download: View User Manual (PDF)