1. Product Introduction
The E27 Universal Plastic Screw Socket Lamp Holder is a versatile and user-friendly lighting accessory that allows you to easily install and use lightbulbs with an E27 screw base. This instruction manual provides guidance on how to effectively utilize the lamp holder for optimal lighting performance.

2. Safety Precautions
- Before installation, ensure that the power supply is turned off to avoid any electrical hazards.
- Use the lamp holder within the specified voltage and wattage ratings to prevent overheating or short circuits.
- Avoid touching the lamp holder with wet hands to reduce the risk of electric shock.
- Always handle the lamp holder by its base and avoid placing excessive pressure on the plastic components.
- Keep the lamp socket away from flammable materials.
- Do not use the lamp socket in wet or damp locations.
3. Installation & Operating Instructions
Follow these steps for proper installation and operation of your E27 Lamp Holder:
- Ensure the power is turned off before installation.
- Screw the lamp socket into the light fixture clockwise until it is secure.
- Connect the wires from the light fixture to the appropriate terminals on the lamp socket.
- Ensure the connections are tight and secure.
- Install the bulb into the lamp socket by twisting it clockwise until it is firmly in place.

4. Maintenance
- Regularly check the lamp socket for any signs of damage or wear.
- Clean the lamp socket and bulb regularly to remove any dust or dirt.
- Replace the bulb when it burns out or becomes damaged.
- If the lamp socket becomes damaged, discontinue use and replace it with a new one.
5. Troubleshooting
- If the lamp socket does not work, check the power source and ensure it is turned on.
- Ensure the bulb is properly seated in the lamp socket.
- Check the connections between the lamp socket and light fixture for any loose wires.
- If the issue persists, consult a qualified electrician for assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | CILIA |
| Item Type | Lamp Bases |
| Base Material | ABS |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Length | 19 cm |
| Package Width | 19 cm |
| Package Height | 5 cm |
| Package Weight | 0.087 kg |
7. User Tips
- Some units may have minor molding edges; these typically do not affect the functionality or appearance significantly.
- For an enhanced aesthetic, consider installing the lamp holder on a white or light-colored ceiling.
8. Warranty & Support
For detailed warranty information and further technical support, please refer to the official user manual PDF available at this link.
If you encounter persistent issues that cannot be resolved using the troubleshooting steps, it is recommended to consult a qualified electrician for assistance.