1. Introduction
Thank you for choosing the Ajazz AF82 Tri-Mode Mechanical Keyboard. This keyboard features a compact 75% layout, versatile tri-mode connectivity (Wired, 2.4G Wireless, Bluetooth), dynamic RGB lighting, a multimedia knob, and a long-lasting 4000mAh battery. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new keyboard.
Figure 1: Ajazz AF82 Series Keyboards (75% Layout, Tri-Mode, 4000mAh Battery)
2. Package Contents
- Ajazz AF82 Tri-Mode Mechanical Keyboard
- USB Type-C Cable (detachable)
- 2.4G USB Receiver
- User Manual (this document)
3. Setup
3.1 Initial Charging
Before first use, it is recommended to fully charge the keyboard. Connect the provided USB Type-C cable to the keyboard's Type-C port and the other end to a computer's USB port or a standard 5V USB charger.
Figure 2: Charging Instructions and Battery Capacity
Charging Instructions:
- It is recommended to charge the keyboard using a computer USB port.
- Do not charge the keyboard with a fast-charging mobile phone charger.
- Do not charge the keyboard with unqualified non-standard power adapters.
- Do not charge the keyboard with overvoltage/overcurrent power adapters.
- Keep the keyboard away from high-temperature devices while charging.
- The indicator light will turn on during charging and turn off when fully charged.
- Please turn off the power switch when the keyboard is not in use for a long time.
3.2 Connecting the Keyboard
The Ajazz AF82 supports three connection modes: Wired, 2.4G Wireless, and Bluetooth.
Figure 3: Tri-Mode Connectivity (Type-C, Bluetooth, 2.4G)
3.2.1 Wired Connection
- Ensure the keyboard's power switch (usually on the side or back) is in the OFF position or set to wired mode if available.
- Connect the USB Type-C cable to the keyboard and the USB-A end to your computer.
- The keyboard will be automatically recognized by your system.
Figure 4: Detachable Type-C Cable for Easy Connection and Storage
3.2.2 2.4G Wireless Connection
- Plug the 2.4G USB receiver into an available USB port on your computer.
- Turn on the keyboard and set the mode switch to 2.4G wireless mode (often indicated by a 2.4G icon).
- The keyboard should automatically connect. If not, press and hold the FN key + the 2.4G key (usually F1 or a dedicated key) for a few seconds to enter pairing mode. The indicator light will flash, then become solid once connected.
3.2.3 Bluetooth Connection
The keyboard supports multiple Bluetooth devices (BT1, BT2).
- Turn on the keyboard and set the mode switch to Bluetooth mode (indicated by a BT icon).
- Press and hold FN + BT1 (or BT2) for 3-5 seconds until the corresponding indicator light flashes rapidly, indicating pairing mode.
- On your device (computer, tablet, phone), search for Bluetooth devices and select