Digital Clock Digital Wall Clock with Remote Control

Contents

Large Digital Wall Clock with Remote Control

Model: Digital Wall Clock with Remote Control

1. Introduction

Thank you for choosing our Large Digital Wall Clock. This versatile electronic clock features a large LED display, remote control operation, dual alarm settings, and a built-in weather station that displays temperature, humidity, and a weather forecast. It is designed for both wall mounting and desktop use, making it a perfect addition to any living space.

2. Safety Information

  • Use only the specified DC5V power adapter. Using an incorrect power source may damage the device.
  • Keep the clock away from water and high humidity environments to prevent electric shock or damage.
  • Do not attempt to disassemble or repair the clock yourself. Contact qualified personnel for service.
  • Keep AAA batteries (for memory function) out of reach of children.

3. Package Contents

Please check the package for the following items:

  • Large Digital Wall Clock Unit
  • Remote Control
  • USB Power Cable (DC5V)
  • User Manual (PDF available online)

4. Product Overview

4.1. Front Display Features

The large LED display provides clear visibility of various information:

Front view of the digital clock with labels pointing to Date display, Weekly display, Time display, Temperature detection, Humidity detection, Alarm setting, and Weather display.

Image: Front view of the digital clock with labels indicating Date, Weekly, Time, Temperature, Humidity, Alarm, and Weather displays.

  • Time Display: Large digital display for hours and minutes, with AM/PM indicator.
  • Date Display: Shows month and day.
  • Weekly Display: Indicates the current day of the week (Sun, Mon, Tue, Wed, Thu, Fri, Sat).
  • Weather Display: Icon-based forecast (Sunny, Semi-sunny, Cloudy, Rainy).
  • Temperature Detection: Displays ambient temperature in Celsius or Fahrenheit.
  • Humidity Detection: Shows ambient humidity percentage.
  • Alarm Setting: Indicators for ALM1 and ALM2.

4.2. Rear Panel Features

The back of the clock includes essential ports and controls:

Back view of the digital clock showing the DC5V power jack, wall hanging hole, battery slot, and desk stand.

Image: Back view of the digital clock, highlighting the DC5V power jack, wall hanging hole, battery slot, and desk stand.

Close-up of the back panel buttons: SET, UP, DOWN, and the battery compartment.

Image: Close-up of the back panel buttons (SET, UP, DOWN) and the battery compartment, with a note that AAA batteries are for power-off memory only.

  • DC5V Power Jack: Connect the USB power cable here.
  • Wall Hanging Hole: For mounting the clock on a wall.
  • Battery Slot: For 2x AAA batteries (memory function only, not for primary power).
  • Desk Stand: Fold-out stand for tabletop placement.
  • SET Button: Used to enter and confirm settings.
  • UP Button: Used to increase values or navigate upwards in menus.
  • DOWN Button: Used to decrease values, navigate downwards, or adjust brightness (long press).

4.3. Remote Control

The remote control allows convenient adjustment of settings from a distance of up to 4 meters.

5. Setup

5.1. Powering the Clock

  1. Connect the provided USB power cable to the DC5V power jack on the back of the clock.
  2. Plug the other end of the USB cable into a compatible DC5V power adapter (not included) and then into a wall outlet. The clock will emit a "beep" sound and enter normal clock mode, defaulting to 12-hour PM12:00.
  3. Optional: Insert 2x AAA batteries into the battery slot. These batteries are for power-off memory only and will preserve time settings during a power outage. They do not power the clock for normal operation.

5.2. Placement

  • Desktop Use: Extend the built-in desk stand on the back of the clock to place it on a flat surface.
  • Wall Mounting: Use the wall hanging hole on the back of the clock to securely mount it on a wall.

5.3. Remote Control Preparation

Before using the remote control, remove the transparent insulation sheet from its battery compartment. Ensure the remote is pointed towards the clock for optimal functionality.

6. Operating Instructions

6.1. Basic Button Operations (on Clock)

  • SET: Press to cycle through setting modes (Clock -> Calendar -> Alarm). Long press to enter time/date setting.
  • UP/DOWN: In normal time mode, press DOWN to toggle between Fahrenheit and Celsius. In setting modes, use to adjust values.
  • Long Press DOWN: In normal time mode, long press DOWN to adjust display brightness levels (L-SL, L-01, L-02, L-03, OFF).

6.2. Time and Date Setting

  1. Long press the SET button for approximately 3 seconds to enter time setting mode.
  2. The hour display will flash. Use UP/DOWN to set the hour. Long press UP/DOWN for rapid adjustment.
  3. Press SET to move to minute setting. Use UP/DOWN to set the minutes.
  4. Press SET to move to 12/24 hour format selection. Use UP/DOWN to choose. (12-hour format will show PM indicator).
  5. Press SET to move to year setting. Use UP/DOWN to set the year (default 2023).
  6. Press SET to move to month setting. Use UP/DOWN to set the month.
  7. Press SET to move to day setting. Use UP/DOWN to set the day.
  8. Press SET again to exit the setting mode and save the current time.

6.3. Alarm Settings

The clock supports two independent alarms (ALM1 and ALM2).

  1. In normal time mode, press SET twice to enter alarm mode.
  2. Use UP to select ALM1 or ALM2. Use DOWN to toggle the selected alarm ON/OFF. An alarm icon will appear when the alarm is ON.
  3. With ALM1 or ALM2 selected, long press SET for approximately 3 seconds to enter alarm time setting.
  4. The hour display will flash. Use UP/DOWN to set the hour. Long press for rapid adjustment.
  5. Press SET to move to minute setting. Use UP/DOWN to set the minutes.
  6. Press SET to select alarm frequency: Daily, Single day, or Double day.
  7. Press SET again to exit and save alarm settings.

Note: When an alarm sounds, its icon will flash. Press any button to stop the alarm. If no button is pressed, the alarm will stop automatically after 15 seconds.

6.4. Brightness Adjustment

Digital clock displaying different brightness levels: L-01 (low), L-02 (medium), L-03 (high), and OFF.

Image: Digital clock displaying different brightness levels: L-01 (low), L-02 (medium), L-03 (high), and OFF.

  • Manual Adjustment: In normal time mode, long press the DOWN button to cycle through brightness levels: L-SL (default), L-01, L-02, L-03, and OFF.
  • Automatic Adjustment: The screen brightness automatically reduces to the lowest level (L-SL) between 18:00 and 07:00. During other times (07:00-18:00), it will display at the highest brightness.

6.5. Weather Forecast Function

The clock provides a weather forecast based on detected ambient temperature and humidity. The forecast is categorized into four grades: Sunny, Semi-sunny, Cloudy, and Rainy.

Weather Forecast Conditions
Temperature RangeHumidity RangeForecast
< 15°C (59°F)≤ 40%Sunny
41% - 65%Semi-sunny
66% - 71%Cloudy
≥ 72%Rainy
15°C - 24.9°C (59°F - 76.8°F)≤ 55%Sunny
56% - 70%Semi-sunny
71% - 79%Cloudy
≥ 80%Rainy
≥ 25°C (77°F)≤ 60%Sunny
61% - 75%Semi-sunny
76% - 86%Cloudy
≥ 87%Rainy

6.6. Temperature Unit Conversion

In normal time mode, press the DOWN button on the clock to toggle between Celsius (°C) and Fahrenheit (°F).

6.7. Remote Control Functions

Remote control with various buttons labeled for clock functions.

Image: Remote control with buttons for various clock functions.

The remote control provides the following functions:

  • ON/OFF Button: Turns the display ON or OFF.
  • TIME Button: Directly enters time mode.
  • ALARM Button: Directly enters alarm mode.
  • SET Button: Enters setting modes.
  • UP/DOWN Buttons: Adjust values in setting modes.
  • L-01, L-02, L-03, OFF Buttons: Directly select brightness levels.
  • °C/°F Button: Toggles temperature unit between Celsius and Fahrenheit.
  • DAILY/SINGLE/DOUBLE DAY Buttons: Select alarm frequency.
  • Number Buttons (0-9): For quick input of time/date/alarm values.

7. Maintenance

  • Cleaning: Wipe the clock surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement (Memory): If the clock loses time settings after a power outage, replace the 2x AAA batteries in the battery compartment. Ensure correct polarity.
  • Remote Control Battery: If the remote control stops responding, replace its internal battery (typically a button cell battery, refer to the remote's specific instructions if available).

8. Troubleshooting

  • Clock not turning on or displaying: Ensure the DC5V power cable is securely connected to both the clock and a working power adapter/outlet. The clock requires continuous external power to operate.
  • Clock not working with AAA batteries: Please note that the AAA batteries are for power-off memory function ONLY. They do not power the clock for normal operation. The clock must be plugged into a DC5V power source to function.
  • Remote control not responding: Check if the insulation sheet has been removed from the remote's battery compartment. Ensure the remote's battery is not depleted. Point the remote directly at the clock within the 4-meter range.
  • Incorrect time/date: Follow the "Time and Date Setting" instructions to reset the time and date.
  • Weather forecast seems inaccurate: The weather forecast is based on local temperature and humidity readings and is an estimation. It may not always perfectly match external weather conditions.

9. Specifications

Product Specifications
FeatureDetail
TypeWall Clocks
Display TypeDIGITAL
Motivity TypeDigital
MaterialPlastic
Body MaterialPlastic
StyleModern Style
ShapeGeometric
FormSingle Face
CombinationSeparates
Applicable PlacementLIVING ROOM
Length256mm
Width3cm
FeaturesCalendars, LUMINOVA, Loudspeaker Mute
Function 1Power-off Memory Function
Function 2Adjustable Brightness
Function 3Remote control
Function 4Dual alarms
Function 5Indoor Thermometer Hygrometer
Battery IncludedNo (for primary power)
Is Smart DeviceNo
Package Length29 cm
Package Width25 cm
Package Height5 cm
Package Weight0.627 kg

10. User Tips

  • Visibility: While the display is large, some users find the weekly display text to be small. Consider optimal placement for best readability, especially for seniors.
  • Power Source: Always ensure the clock is connected to a DC5V power source for continuous operation. The AAA batteries are strictly for maintaining time settings during power interruptions, not for powering the display.
  • Remote Control Range: For best performance, use the remote control within 4 meters of the clock and ensure a clear line of sight.

11. Warranty and Support

For any issues or further assistance, please contact the seller or retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.

For a detailed user manual, please refer to the PDF document available at User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.