1. Product Overview
The RACBOX Mini 2.5 inch Bi-xenon Projector Lens is an auxiliary accessory designed for automotive lighting. It is intended for the normal replacement and upgrade of original car lights, offering both low beam (wide and clear) and high beam (wide and focused) functions. This product is suitable for retrofitting headlights in cars and motorcycles, compatible with various bulb types including H1 Xenon and LED lamps.
Key features include a durable metal reflective cup for optimal light refraction, a clear glass lens for a sharp beam, a quality anti-lock motor tested for 50,000 cycles, and high-temperature resistant PC material to prevent imbalance during mounting.
Figure 1: Internal Components and Design Features
Figure 2: Bi-xenon Lens Design and H1 Bulb Compatibility
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Package Contents
Please verify that all components are present and undamaged upon opening the package:
- Mini 2.5 inch Bi-xenon Projector Lens (Quantity may vary based on order, typically 1 or 2 pieces)
- H4 Adapter Ring
- H7 Adapter Ring
- H4 Rubber Ring
- H7 Rubber Ring
- Lamp Clips / Fasteners
- Mounting Screws/Hardware
Figure 3: Projector Lens and Installation Accessories
4. Specifications
| Attribute | Value |
|---|---|
| Model Name | PRJWST25-L |
| Socket Type | H1 |
| Item Type | Lens |
| Compatibility | Universal for retrofit, specifically mentioned for Ford vehicles. Compatible with H4, H7, 9005, 9006 car headlights. |
| Lens Diameter | 65mm (2.5 inches) |
| Overall Length | 135mm (5.3 inches) |
| Front Bezel Diameter | 71mm (2.8 inches) |
| Rear Mounting Diameter | 68mm (2.6 inches) |
| Height | 50mm (1.9 inches) |
| Lens Hole Diameter (Internal) | 20mm (0.8 inches) |
| Package Weight | 0.82 kg |
| Package Dimensions (L x W x H) | 15cm x 10cm x 5cm |
Figure 4: Projector Lens Dimensions
5. Installation Instructions
Professional installation is recommended. Ensure all safety warnings are read and understood before proceeding.
- Turn off the vehicle engine and disconnect the vehicle battery to prevent short circuits.
- Remove the headlight assembly from the vehicle.
- Open the headlight housing carefully using appropriate professional tools.
- Remove the original reflector or bulb from the headlight.
- **Check Compatibility:** The hole of the lens measures 20mm in diameter. The hole of the headlight assembly needs to be larger than 20mm in diameter for proper fitment.
- Mount the projector lens into the headlight housing.
- Secure the projector lens using the provided brackets or screws. Adjust the lens position to ensure it is centered and stable.
- Connect the low beam and high beam wires correctly. The Bi-xenon design allows for seamless switching between these modes.
- Install the shrouds or lens covers if needed.
- Re-seal the headlight housing to ensure it is waterproof and airtight.
- Reinstall the headlight assembly back into the vehicle.
Visual Installation Guide
Video 1: Installation Guide of Bi-xenon Projector Lens. This video demonstrates the steps for installing the projector lens into a headlight assembly, including measuring the lens hole, inserting the lens, installing adapters and spacers, screwing, using fasteners, and inserting H1 Xenon or LED bulbs.
Step-by-Step Image Guide
Figure 5: Product Installation Steps
6. Operating Instructions
- After installation, adjust the light beam pattern to ensure proper alignment and optimal visibility.
- Test both the low beam and high beam functions to confirm correct operation. The Bi-xenon lens allows for seamless switching between these modes.
- Check all connections and ensure there are no abnormal shadows or glare in the light output.
Figure 6: Low Beam vs. High Beam Pattern
7. Maintenance
To ensure the longevity and optimal performance of your projector lenses:
- Periodically inspect the headlight assembly for any signs of moisture ingress or damage to the housing seal.
- Keep the outer lens surface clean from dirt and debris using a soft cloth and appropriate automotive lens cleaner.
- Avoid using abrasive materials or harsh chemicals that could scratch or damage the lens.
- If the light output appears diminished or uneven, check the bulb and its connections.
8. Troubleshooting
- **No Light Output:**
- Check all electrical connections to ensure they are secure.
- Verify the bulb is correctly seated and not damaged.
- Ensure the vehicle battery is properly connected and charged.
- **Poor Beam Pattern/Uneven Light:**
- Re-check the lens alignment and ensure it is centered and stable within the housing.
- Confirm the bulb is correctly installed and oriented.
- Ensure the headlight housing is properly sealed and free from condensation.
- **Bulb Fitment Issues (e.g., H1 LED bulbs):**
- Some H1 LED bulbs may have a slightly larger base than traditional H1 Xenon bulbs. Minor modification (e.g., filing) of the fitting area on the projector or using a different H1 LED bulb model might be necessary for a secure fit.
- **High/Low Beam Not Switching:**
- Check the wiring connections for the high/low beam solenoid.
- Ensure the solenoid is functioning correctly.
9. User Tips
- **Excellent Cutoff:** Users have noted the excellent cutoff line provided by these projector lenses, contributing to clear visibility without blinding oncoming traffic.
- **H1 LED Compatibility:** While designed for H1 bulbs, some H1 LED bulbs might require slight modification to the projector's fitting area due to variations in bulb base size. Always ensure a snug and secure fit.
- **Professional Installation:** For optimal performance and safety, especially when dealing with headlight disassembly and re-sealing, professional installation is highly recommended.
10. Warranty & Support
Compliance Information
This product is an auxiliary accessory for automotive lighting and is only used for the normal replacement and upgrade of the original car lights, not for illegal modification or illegal use. The products meet the relevant national automotive lighting industry standards, have undergone strict quality testing before leaving the factory, and are qualified to leave the factory.
Manufacturer Information
Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd
Address: C116, No. 1489, Fanghua Road Baiyun Guangzhou
Contact: tdlaccount@126.com
EU Authorized Representative
Representative: APEX CE SPECIALISTS LIMITED
Address: UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
Contact: info@apex-ce.com
For any product support or warranty inquiries, please contact the seller or manufacturer directly using the provided contact information.
A user manual in PDF format is also available for download: User Manual (PDF)