XTOOL D6

Contents

XTOOL D6 Smart Diagnostic System User Manual

Model: D6 | Brand: XTOOL

1. Introduction

The XTOOL D6 Diagnostic Tool interfaces with the Electronic Control Unit (ECU) of a vehicle to retrieve diagnostic trouble codes (DTCs), clear trouble codes, access data stream information, read freeze frame data, and read ECU information. It is designed to diagnose various vehicle control systems, including the engine, transmission, anti-lock brake system (ABS), SRS (Airbag) system, chassis, and body. The D6 also features full OBD II functions and supports CAN FD and FCA protocols.

This upgraded diagnostic tool is equipped with a dual-core 1.2GHz Processor, 128MB RAM, and 32GB ROM, a 5.45-inch display, and a 3150mAh 3.6V battery for extended use.

The XTOOL D6 offers 18 special functions, all with lifetime free upgrades, including Oil Light Reset, EPB, SAS, DPF, BMS Reset, Throttle Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Window Initialization, Headlight Adjustment, EGR Relearn, and Gear Learning. The Diagnostic Tool is capable of graphing up to four live data parameters on a single screen for detailed analysis.

XTOOL D6 Diagnostic Tool showing diagnostic menu
Figure 1.1: XTOOL D6 Diagnostic Tool with its main diagnostic menu.

2. Safety Information

For your safety, the safety of others, and to prevent damage to devices and vehicles, it is crucial to read and understand all safety instructions presented in this manual before operating or coming into contact with the device.

General Safety Instructions:

  • Read and Understand: Ensure that all operators and individuals in the vicinity of the device have read and understood the safety instructions.
  • Proper Use: Only use the device as described in this manual. Always adhere to the safety messages and test procedures provided by the vehicle or equipment manufacturer.
  • Knowledge and Skill: The automotive technician must be knowledgeable about the system being tested. Familiarize yourself with proper service methods and test procedures.
  • Acceptable Testing Practices: Perform tests in a manner that ensures your safety, the safety of others, and prevents damage to the device and the vehicle.

Specific Responsibilities:

  • Refer to Manufacturer Guidelines: Always consult and follow the safety messages and applicable test procedures from the vehicle or equipment manufacturer before using the device.
  • Use Appropriate Tools and Techniques: Due to the variety of test applications and product variations, it's important to use the correct tools and techniques for each specific task.
  • Anticipate Safety Requirements: While this manual provides comprehensive guidance, it cannot cover every potential situation. Technicians must be prepared to handle unforeseen circumstances safely.

By adhering to these guidelines and responsibilities, you can ensure a safe and effective working environment while using the device.

Safety Messages:

Danger: This signal word indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders.

Warning: This signal word indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders.

Important Safety Instructions:

  • Safe Environment: Always perform automotive testing in a safe environment.
  • Eye Protection: Wear safety eye protection that meets ANSI standards.
  • Avoid Hazards: Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
  • Ventilation: Operate the vehicle in a well-ventilated work area to avoid inhaling poisonous exhaust gases. Engines emit carbon monoxide, a colorless and poisonous gas that can impair reaction times and lead to serious injury or even death.
  • Transmission and Brakes: Put the transmission in PARK (for automatic) or NEUTRAL (for manual) and ensure the parking brake is engaged.
  • Wheel Blocks: Place blocks in front of the drive wheels and never leave the vehicle unattended while testing.
  • Ignition System Caution: Be extra cautious around the ignition coil, distributor cap, ignition wires, and spark plugs, as these components generate hazardous voltages when the engine is running.
  • Fire Extinguisher: Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
  • Test Equipment Connections: Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
  • Clean Equipment: Keep the test equipment dry, clean, and free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.
  • No Driving While Testing: Do not drive the vehicle and operate the test equipment simultaneously to avoid distractions that may cause an accident.
  • Service Manual Reference: Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.
  • Battery Check: Ensure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure to avoid damaging the test equipment or generating false data.
  • Avoid Electromagnetic Interference: Do not place the test device on the vehicle's distributor, as strong electromagnetic interference can damage the device.

3. Setup

3.1 Getting Started

Ensure that the Diagnostic Tool is adequately powered by either checking its battery status or connecting it to an external power supply.

3.2 Main Ports of the Tablet

The XTOOL D6 tablet features several ports and components for its operation:

  1. 5.45-Inch Touch Screen: Main interface for interaction.
  2. Power Button: Used to turn the device on/off and for emergency shutdown.
  3. VGA 15 PIN-Port: For connecting to the vehicle via the main diagnostic cable.
  4. Type-C Port: For charging the device.
  5. Memory Card Slot: For expanding storage up to 128GB.
Diagram of XTOOL D6 tablet showing ports and buttons
Figure 3.1: Main ports and components of the XTOOL D6 tablet.

3.3 Power Sources

The XTOOL D6 Diagnostic Tool can receive power from three methods:

  • Internal Battery Pack: A fully charged internal rechargeable battery provides approximately 3.5 hours of continuous operation.
  • AC Power Supply: Connect the tool to a standard AC outlet using the provided AC power supply. Ensure to use only the original AC power supply for proper and safe operation.
  • 12-Volt Vehicle Power: Connect the tool to the vehicle's OBDII port using the 16-pin OBDII cable. The OBDII port is typically found beneath the driver's seat, near the steering wheel.

3.4 Turning On/Off and Emergency Shutdown

  • Turning On: Press and hold the power button (top right) for approximately five seconds. The tool will power on if the battery is sufficiently charged or if connected to AC power. If the battery is completely drained, charge it for over 6 hours before attempting to turn it on.
  • Turning Off: Press and hold the power button for more than three seconds. The tool will automatically power off. Always terminate all vehicle communications before turning off the device.
  • Emergency Shutdown: If the tool is unresponsive, press and hold the power button for at least five seconds to force a shutdown. This should only be used in emergencies as it may cause issues with the vehicle's ECM if communication is active.

3.5 Vehicle Connection

To establish communication with the vehicle, the scan tool must be connected to the vehicle's OBD-II port.

  1. Turn on the tablet.
  2. Connect the vehicle and tablet using the main test cable (VGA to OBDII-16 Main Cable).
  3. Turn on the vehicle's ignition switch to start the diagnostic process.
Diagram showing connection of XTOOL D6 to a vehicle's OBDII port
Figure 3.2: Connecting the XTOOL D6 to a vehicle's OBDII port.

Note: If the OBD port is hard to reach, an OBD extension cable can be purchased separately.

4. Operation

4.1 Screen Layout & Icons

Upon powering on, the diagnostic screen will display various icons for different functions:

  • Auto Scan: Automatically detects and decodes the VIN, then comprehensively scans all available vehicle electronic control modules.
  • Diagnosis: Access the diagnostic menu to manually input vehicle information or use Auto VIN for diagnostics.
  • OBD II: Access standard On-Board Diagnostics functions like reading/clearing fault codes, monitoring real-time data, and detecting emission system issues.
  • Special Functions: Access commonly performed maintenance services.
  • Updates: Download diagnostic software programs.
  • More: Access settings, user account, workshop profile, firmware information, diagnostic reports, and language settings.
XTOOL D6 diagnostic screen showing main function icons
Figure 4.1: Main screen icons for the XTOOL D6 Diagnostic Tool.

4.2 How to Diagnose Vehicles

The Diagnostic Tool enables communication with a vehicle's electronic control systems to retrieve DTCs, view PID data, and perform advanced functions such as resets, relearns, matchings, adaptations, and initializations.

4.2.1 Vehicle Identification

To ensure proper communication, the vehicle must be correctly identified. Procedures may vary by region and manufacturer.

  • Auto Identification: Click "Auto Scan" > "Auto Identification" to automatically scan and decode the vehicle's VIN.
  • Manual Input: If auto identification fails, manually input the VIN.
  • Manual Selection: If VIN decoding fails, select "Diagnosis" > choose region, make, model, and year. This is the most reliable method.

Note: Auto Identification may not be compatible with all vehicles. If it fails, try manual input or manual selection. Some older vehicles may not have VIN stored in ECU, or the VIN might not be in the database.

4.2.2 Diagnostics Functions

Once the vehicle is identified, the tool can access its electronic control systems.

  • Read Codes: View current and historical Diagnostic Trouble Codes (DTCs). If "System is OK" or "No Trouble Code" is displayed, it means no related fault codes are stored or monitored by that specific ECU.
  • Clear Codes: Erases DTC records, freeze frame data, and other stored information from the ECM. A confirmation screen will appear to prevent accidental data loss.
  • DTC Erased While Fault Remains: If underlying issues are not resolved, fault codes will reappear after a few drive cycles.
  • DTC Erased and Fault Fixed - History Code: If a fault is fixed but a code remains, the ECU may clear it or reclassify it as historical.
  • DTC Erased and Fault Fixed - History Cleared: Clearing codes after a fix also erases fault history, which might remove valuable diagnostic information.
  • PID Data (Live Data): Displays real-time data from various sensors. You can view data in a list, individual graphing, analog dashboard, or combine up to 4 sensors for merged graphing.
XTOOL D6 displaying 4-in-1 live data streams
Figure 4.2: Monitoring and graphing up to 4 live data streams simultaneously.
  • Freeze Frame: Provides a snapshot of critical parameter values at the moment a DTC is set, helping analyze the root cause of the fault.
  • I/M Readiness (Smog Check): Checks the readiness of the monitoring system for emissions compliance.
  • O2S Monitoring Test: Checks the integrity of oxygen sensors.
  • On-Board Monitor Test: Views results of on-board monitor tests, useful after servicing or clearing ECM memory.
  • Component Test: Enables bidirectional control of the ECM to test components (e.g., EVAP leakage test).
  • Read ECU Information: Displays ECU names, supported protocols, and calibration information.

4.2.3 Exiting Diagnostics

To exit diagnostic programs, return to the main diagnostic screen. Diagnostics remain active as long as there's a communication link. Always exit all tests before disconnecting the main cable or turning off the tool to prevent ECM damage.

4.2.4 Diagnostic Report

After diagnostics, you can generate a report by entering VIN, mileage, and model year. Reports can be reviewed or shared via email.

4.2.5 Diagnostic Speed

Scanning speed varies based on the vehicle's communication protocol and number of control modules. Newer protocols (e.g., CAN) are faster than older ones (e.g., ISO9141).

4.2.6 Integrated Module

Some older vehicles integrate multiple electronic control systems into one module (e.g., Powertrain Control Module for Engine and Transmission, Brake Control Module for ABS and EPB). If a specific option isn't found, check related integrated modules.

4.3 OBD-II Functions

The OBD-II function provides a quick way to check DTCs, identify MIL causes, check monitor status for emissions testing, and verify repairs. It accesses generic OBD-II data related to emissions.

  • OBD-II Protocols: Supports SAE J1850PWM, SAEJ1850VPW, ISO 9141-2, ISO 14230-4, ISO 15765-4, CAN FD, and FCA.
  • 10 Modes of OBD-II: Includes Live Data, Read Freeze Frame, Read Trouble Code, Clear Trouble Code, O2S Monitoring Test, On-Board Monitor Test, Component Test, Read ECU Information, and Read Trouble Code (Mode $0A).
XTOOL D6 screen showing full OBD2 functions
Figure 4.3: Full OBD2 Functions available on the XTOOL D6.

4.3.1 DTC Code Definitions

Diagnostic Trouble Codes (DTCs) are structured to indicate the problem area:

  • First Character: Indicates system (P=Powertrain, C=Chassis, B=Body, U=Network Communication).
  • Second Character: Indicates code type (0=SAE standard/generic, 1=Manufacturer specific/enhanced).
  • Third Character: Specifies subsystem (e.g., 0=Fuel/air metering, 7-8=Transmission).
  • Fourth and Fifth Characters: Two-digit "Specific Fault Index" (0-99) identifying the exact malfunction.

4.4 Special Functions

The D6 offers 18 special functions for maintenance and service tasks. Menu options may vary across vehicles.

XTOOL D6 screen showing 15 maintenance functions
Figure 4.4: Overview of 15 Maintenance Functions.
  • Oil Light Reset: Resets the engine oil life system after an oil change.
  • EPB Reset: Resets calipers, brake discs, or pads after electronic parking brake system repair.
  • SAS Adjustment (EPS Adaptation): Calibrates the steering angle sensor.
  • BMS Reset: Resets the battery monitoring unit after battery replacement.
  • Injector Coding: Writes new injector identification codes to the ECU.
  • DPF Regen: Manages Diesel Particulate Filter regeneration.
  • GPF Regen: Manages Gasoline Particulate Filter regeneration.
  • TPMS Reset: Performs learning, matching, and resetting functions for tire pressure sensors.
  • ABS Bleeding: Bleeds the brake system to restore ABS braking sensitivity.
  • Throttle Adaptation: Resets throttle actuators and learned values to default.
  • Gearbox Adaptation: Completes self-learning for the gearbox.
  • Suspension Adaptation: Adjusts vehicle body height sensors.
  • Windows Initialization: Recovers ECU initial memory for power windows.
  • Sunroof Initialization: Recovers ECU initial memory for sunroof.
  • Headlight Adjustment: Initializes adaptive headlight system.
  • EGR Relearn: Learns the EGR valve after cleaning or replacement.
  • Cam Sensor Adaptation: Calibrates the engine control unit to match camshaft position.
  • CPS Reset: Performs tooth learning for the vehicle and turns off the MIL.

Note: Special functions are not universally available for all vehicles. Compatibility depends on VIN, make, model, and year. Consult technical support for specific vehicle compatibility.

5. Maintenance

5.1 Software Updates

Software updates can be performed via Wi-Fi or a mobile phone hotspot. A mobile hotspot is recommended if home Wi-Fi has restrictions. If a "Network abnormal" prompt appears, try another Wi-Fi network or contact support.

You have two options for updating software:

  • Update All Software Programs: Click "Update" in the update menu.
  • Update Individual Software Program: Click the update icon next to a specific program.
XTOOL D6 screen showing software update options
Figure 5.1: Software update screen with Wi-Fi connection.

Deleting Software Programs

To free up memory and improve performance, you can delete rarely used diagnostic software programs. Long-press on a software package in the Diagnostic menu, check the box, and click "Delete".

5.2 Data Logging

For software-related issues or communication problems, data logging provides crucial information for technical support. Ensure your Diagnostic Tool is connected to Wi-Fi for at least 15 minutes and provide the Serial Number (S/N) to allow the technical team to access data logs.

6. Troubleshooting (FAQs)

Here are answers to common questions and issues:

  • Q: I haven't found I/M readiness in the menu.
    A: Click the "OBD-II" icon > Auto Scan/Select OBD-II Protocol > I/M Readiness.
  • Q: Unable to find live sensor data (e.g., short-term/long-term fuel trim).
    A: Click the "OBD-II" icon > Auto Scan/Select OBD-II Protocol > Live Data > LTFT, STFT or similar term.
  • Q: Unable to find misfire data for Ford/Dodge/Chrysler/Jeep cars?
    A: OBD-II > Auto Scan or Select OBD-II Protocol for your car > On Board Monitor Test > Select "Misfire Cylinder Data" or similar term.
  • Q: I cannot charge the battery. It's almost dead, only about 10% left.
    A: 1. Try using the original charging cable or OBD test cable to charge the device for more than six hours. (Using the original charging cable to connect to a stable 12V power supply is preferred).
    2. Hold down the shutdown button for 15 seconds and observe if the device can be turned on normally (do not connect the charging cable).
    3. Connect the device to a computer via USB cable to see if it's recognized.
    4. If charging issues persist, contact technical support: support@xtoolonline.com and send a video of the issue.
  • Q: Can the scanner tune up a car?
    A: No, the D6 Diagnostic Tool does not have the capability to tune up a car.
  • Q: The device froze until the battery went flat, even after trying the reset/power button.
    A: Ensure the App is updated to the latest version (More > Setting > About > Version > APP Version). If updated, try resetting to factory settings. If the issue persists, contact support: support@xtoolonline.com.
  • Q: I cannot update, and I've tried Wi-Fi and cell phone hotspot, but it keeps showing "failure connection".
    A: This could be due to router firewall settings or network provider restrictions. Check if your router firewall can access the server. If the problem persists, contact support: support@xtoolonline.com.
  • Q: Why should I connect the scanner to the internet once a month?
    A: It's a government policy compliant requirement to report IP location to prevent illegal activities. If connecting to Wi-Fi doesn't resolve an issue, contact support.
  • Q: The auto scan/VIN cannot work on my vehicle.
    A: Auto scan/VIN may not work for all vehicles if VIN is not stored in the ECU, not in the database, or for certain vehicle communication modes. Try alternative navigation methods: turn on ignition (engine off) for auto scan, or turn on ignition (engine on) for older vehicles.
  • Q: My diagnostic tool cannot connect to Wi-Fi.
    A: If it shows "times out", check your router (WPA2, not WPA3 for maximum compatibility) and ensure it's not blocking outgoing network traffic to non-US regions. Using a mobile phone hotspot is often a solution for registration. If connected but shows "connect internet to sync your device", correct the time zone in Android settings to match the network time zone.
  • Q: When activating the device, it shows "registration failure" after entering my email address.
    A: Try using a mobile hotspot (recommended) or a different network to activate.
  • Q: Received a used device with a lock screen password, unable to open.
    A: Contact support with the device's S/N to resolve the issue.
  • Q: Shall I connect my device to the Internet/Wi-Fi all the time?
    A: No, it doesn't need an Internet connection all the time. You only need it to register and download updates. Some advanced features like ECU Programming for specific vehicles (e.g., Peugeot) may require an internet connection.
  • Q: Does your tool support all functions on all vehicles?
    A: XTOOL D6 is a comprehensive diagnostic tool, but it cannot perform all functions on all vehicles. This is common for all scan tools, as not all vehicles are manufactured with the same functions or configurations.

7. Technical Specifications

ItemDescription/Specification
Display5.45 Inch (1440*720 Resolution)
Operating SystemLinux
Protocols SupportedCAN FD/FCA
ProcessorDual-core 1.2 GHz
Memory128M+32G (expandable up to 128GB via SD card)
ConnectivityType-C
Operating MethodFlat Panel Touchscreen
Upgrade MethodDevice Connects to Wi-Fi for Online Upgrade
Battery3150mAh 3.6V
Wi-Fi2.4G/5Ghz
Tested Battery Life3.5 Hours
Dimensions19.5*2.8*11.5 (CM)
Free Renewal UpdateLifetime
Charging MethodType-C Charging (No charger included)
SensorGravity/ Light Sensor
AudioMicrophone
SpeakerBuilt-In Speaker
Weight (Including Battery)0.4KG
Gross Weight0.8KG
Operating Temp Range (Ambient)-4°F ~ 140°F (-20°C ~ 60°C)
Storage Temp (Ambient)-40°F ~ 158°F (-40°C ~ 70°C)
Operating Humidity<90%

7.1 What's In The Box

NameQTY
Tablet1
VGA to OBD-II-16 Main Cable1
Quick Guide1
Packing List1
Color Carton1
USB Type-C Main Cable1

8. User Tips

  • Stable Wi-Fi Connection: For seamless software updates and certain online diagnostic functions (like those for Peugeot vehicles), ensure your device is connected to a stable Wi-Fi network. If your home Wi-Fi is problematic, a mobile hotspot can be a reliable alternative.
  • Original Accessories: Always use the original charging cable and OBD test cable provided with your XTOOL D6. This ensures proper functionality and prevents potential damage to the device or vehicle.
  • Alternative Vehicle Identification: If the automatic VIN scan fails to identify your vehicle, do not worry. The manual input and manual selection options are robust alternatives that allow you to proceed with diagnostics.
  • Language Authorization: If you need to change the device's language, contact XTOOL support with your tablet's Serial Number (S/N) for authorization. Once authorized, you can switch the language in the settings.
  • Regular Updates: Take advantage of the lifetime free updates. Regularly check for and install updates via Wi-Fi to ensure your device has the latest features, vehicle coverage, and performance enhancements.

9. Warranty

Limited Two-Year Warranty

Shenzhen XTOOL Technology Co., LTD. (the Company) warrants to the original retail purchaser of this XTOOL device that should this product or any part thereof during normal usage and under normal conditions be proven defective in material or workmanship that results in product failure within two years from the date of purchase, such defect(s) will be repaired, or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company's option, without charge for parts or labor directly related to the defect(s).

The Company shall not be liable for any incidental or consequential damages arising from the use, misuse, or mounting of the device.

This warranty does not apply to:

  1. Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation/repair or, improper storage;
  2. Products whose mechanical serial number or electronic serial number has been removed, altered, or defaced;
  3. Damage from exposure to excessive temperature or extreme environmental conditions;
  4. Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company;
  5. Defects in appearance, cosmetic, decorative, or structural items such as framing and non-operating parts;
  6. Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft, or improper usage of any electrical source.

10. Support & Contact Information

Technical Assistance

Product Training Videos

Diagnostic Tool specific training videos are available on the XTOOL website. Follow along to learn the basics of Diagnostic Tool operation. Videos are product specific and available at: https://www.xtoolonline.com/support/product-videos. Click on the "Support" > "Product Videos" > "Diagnostic Tools" tab, select the applicable Diagnostic Tool, then select the training video you want to watch.

Video 10.1: XTOOL D6 Product Overview and Features.

FAQ Database

Access the FAQ database on the XTOOL website: https://www.xtoolonline.com/faqs

Social Media

Share with friends and join the community for tutorials, support, and more:

  • TikTok: Search for "Xtoolonline"
  • Instagram: Search for "Xtoolonline"
  • Facebook Page: Search for "Xtoolonline"
  • Facebook User Group: Search for "XTOOL Official Online Diagnostic Tools"
  • YouTube: Search for "Xtoolonline"

11. Compliance Information

11.1 FCC Compliance / FCC ID: 2AW3IF510

This device complies with Part 15 of the FCC rules and Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Making changes or modifications without explicit approval from the responsible compliance authority may revoke the user's authorization to operate the equipment.

Note: This equipment has undergone testing and meets the requirements for a Class B digital device, as stipulated by Part 15 of the FCC Rules. These standards are intended to offer reasonable protection against interference when installed in residential environments.

11.2 UKCA

UKCA (UK Conformity Assessed) is a compliance mark introduced by the UK after Brexit, intended to replace the previous CE mark. It applies to products sold in the UK market, ensuring that these products meet the UK's safety and environmental standards.

11.3 RF Warning Statement

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction. The term "IC" before the radio certification number only signifies that IC technical specifications were met.

11.4 RoHS Compliance

This device complies with the European RoHS Directive 2011/65/EU, which restricts the use of certain hazardous substances in electrical and electronic equipment.

11.5 CE Compliance

This product conforms to the essential requirements of the following Directives and bears the CE mark accordingly: EMC Directive 2014/30/EU, R&TTE Directive 1999/5/EC, Low Voltage Directive 2014/35/EU.

11.6 ISED

ISED (Innovation, Science and Economic Development Canada) is a Canadian government department focused on promoting innovation, scientific research, and economic growth.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.