STEPPERONLINE 23HS22-2804S-HG100

Contents

STEPPERONLINE Nema 23 Stepper Motor with 100:1 Precision Planetary Gearbox

Model: 23HS22-2804S-HG100

1. Introduction

This manual provides essential information for the safe and efficient operation of your STEPPERONLINE Nema 23 Stepper Motor with a 100:1 Precision Planetary Gearbox. This motor features a 55mm body and a 2.8A rated current, integrated with a 76mm planetary gearbox. It is designed for applications requiring low speed and/or high torque, especially where space is a consideration.

Nema 23 Stepper Motor with 100:1 Precision Gearbox, front-side view
Figure 1: Nema 23 Stepper Motor with 100:1 Precision Planetary Gearbox

2. Safety Information

Please read and understand all safety instructions before installation, operation, or maintenance of the motor. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

  • Always disconnect power before performing any installation or maintenance.
  • Ensure proper grounding to prevent electrical hazards.
  • Do not operate the motor in wet or damp conditions.
  • Avoid touching moving parts during operation.
  • Use appropriate personal protective equipment (PPE) such as safety glasses and gloves.
  • Ensure the motor is securely mounted to prevent unexpected movement.
  • Do not exceed the specified voltage and current ratings.
  • Keep children and unauthorized personnel away from the operating area.

3. Product Overview

The STEPPERONLINE Nema 23 Stepper Motor with Planetary Gearbox is a robust solution for precise motion control. Its integrated gearbox provides high torque at low speeds, making it suitable for various CNC and automation applications.

Nema 23 Stepper Motor with Planetary Gearbox, top-down view
Figure 2: Top-down view
Nema 23 Stepper Motor with Planetary Gearbox, side view showing shaft
Figure 3: Side view with shaft
Nema 23 Stepper Motor with Planetary Gearbox, front view showing shaft
Figure 4: Front view with shaft
Nema 23 Stepper Motor with Planetary Gearbox, rear-side view
Figure 5: Rear-side view

4. Specifications

4.1 Electrical Specifications

Parameter Value
Part Number23HS22-2804S-HG100
Motor TypeBipolar Stepper
Phase2
Step Angle (without Gearbox)1.80° ± 5.00% (0.018° with 100:1 gearbox)
Holding Torque (without Gearbox)105 Ncm (148.69 oz.in)
Rated Current / Phase2.8 A
Phase Resistance0.9 Ohms ± 10%
Inductance2.8 mH ± 20% (at 1KHz)
Insulation ClassB 130°C [266°F]
EU LVD VoltageBelow 50Vac or 75Vdc
CertificationCE

4.2 Gearbox Specifications

Parameter Value
Gearbox TypePrecision Planetary
Gear MaterialAlloy Steel
Gear Ratio100:1
Efficiency75%
Backlash at No-load<=70 arcmin
Max. Permissible Torque25 Nm (3540 oz.in)
Moment Permissible Torque50 Nm (7082 oz.in)
Max. Radial Load (at 20mm shaft length)250 N
Max. Axial Load100 N
Ambient Temperature-10°C to 50°C [14°F to 122°F]
Temperature RiseMAX. 80°C

4.3 Physical Specifications

Parameter Value
Frame Size57 x 57 mm
Motor Length55 mm
Gearbox Length76 mm
Shaft DiameterΦ14 mm
Shaft Length34 mm
Key-way Length25 mm
Number of Leads4
Lead Length320 mm
Weight1690 g
Package Dimensions (L x W x H)20 cm x 10 cm x 11 cm

5. Setup and Installation

5.1 Dimensional Drawing

Refer to the diagram below for detailed dimensions of the motor and gearbox assembly. All dimensions are in millimeters unless otherwise specified.

Dimensional drawing of the Nema 23 Stepper Motor with Planetary Gearbox, showing various measurements and mounting points.
Figure 6: Dimensional Drawing and Detailed Specifications

5.2 Wiring Connection

The motor is a 2-phase bipolar stepper motor with 4 leads. Connect the motor leads to your stepper motor driver according to the following table:

Driver Connection Motor Lead Color
A+Black
A-Green
B+Red
B-Blue
Stepper motor wire connection diagram showing A+, A-, B+, B- terminals connected to Black, Green, Red, Blue wires respectively.
Figure 7: Wire Connection Diagram

Ensure all connections are secure and insulated to prevent short circuits.

6. Operating Instructions

To operate the stepper motor, you will need a compatible stepper motor driver and a controller (e.g., a microcontroller or CNC controller) to send step and direction signals.

  • Power Supply: Connect a suitable DC power supply to your stepper motor driver. The voltage and current should match the driver's requirements and the motor's rated current.
  • Driver Configuration: Configure your stepper motor driver's microstepping and current settings according to your application's needs. Refer to your driver's manual for detailed instructions.
  • Control Signals: Connect the STEP, DIR (Direction), and ENABLE signals from your controller to the stepper motor driver.
  • Initial Test: Before full operation, perform a low-speed test to ensure correct wiring and motor movement. Observe for smooth rotation and correct direction.
  • Load Application: Gradually apply the load to the motor, ensuring it operates within its permissible torque limits.

The 100:1 gearbox provides a high reduction ratio, resulting in a step angle of 0.018 degrees (1.8 degrees / 100). This allows for very fine positional control.

7. Maintenance

The STEPPERONLINE Nema 23 Stepper Motor with Planetary Gearbox is designed for long-term reliability with minimal maintenance. However, periodic checks can help ensure optimal performance and extend its lifespan.

  • Cleaning: Keep the motor and gearbox free from dust, debris, and moisture. Use a soft, dry cloth for cleaning. Avoid using solvents that may damage the motor's components.
  • Connections: Periodically inspect all electrical connections for tightness and signs of corrosion. Re-tighten if necessary.
  • Mounting: Check mounting bolts and screws for tightness. Ensure the motor is securely fastened to its mounting surface.
  • Shaft and Bearings: Inspect the output shaft for any signs of damage or excessive play. The gearbox is sealed and typically does not require lubrication.
  • Temperature: Monitor the motor's operating temperature. Excessive heat can indicate an issue with the driver settings, load, or environment. Ensure adequate ventilation.

8. Troubleshooting

If you encounter issues with your stepper motor, refer to the following common problems and solutions:

Problem Possible Cause Solution
Motor does not move or vibrates
  • Incorrect wiring
  • Insufficient power supply
  • Driver current too low
  • Controller not sending signals
  • Check wiring against Section 5.2
  • Verify power supply voltage and current
  • Adjust driver current settings
  • Check controller output signals
Motor loses steps or stalls
  • Excessive load
  • Driver current too low
  • Motor speed too high
  • Loose mechanical coupling
  • Reduce load or increase driver current
  • Increase driver current
  • Reduce acceleration/deceleration or max speed
  • Check and tighten couplings
Motor runs hot
  • Driver current too high
  • Poor heat dissipation
  • Continuous high load
  • Reduce driver current (within motor limits)
  • Ensure adequate ventilation or add heatsink
  • Reduce load or duty cycle

9. User Tips

While no specific user reviews or Q&A were provided for this product, general tips for stepper motors with gearboxes include:

  • Microstepping: Utilize microstepping on your driver for smoother operation and reduced resonance, especially at lower speeds.
  • Driver Matching: Always ensure your stepper motor driver is appropriately matched to the motor's current and voltage requirements for optimal performance and longevity.
  • Mechanical Alignment: Proper mechanical alignment of the motor shaft to the load is crucial to prevent premature wear on bearings and ensure smooth operation.
  • Cable Management: Route motor cables away from noise-generating components and ensure they are properly shielded if operating in an electrically noisy environment.

10. Warranty and Support

For detailed warranty information, technical support, or further documentation, please refer to the official user manual PDF provided by the manufacturer:

View Official User Manual (PDF)

You can also contact STEPPERONLINE Official Store directly for assistance.

© 2024 STEPPERONLINE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.