Introduction
Thank you for purchasing the Shanwan Q34U Gaming Controller. This wireless gamepad is designed to provide a versatile and high-performance gaming experience across multiple platforms, including PC, Android, iOS, Nintendo Switch, and PlayStation 4. Featuring advanced technologies like dual TMR joysticks, dual-body triggers, and a 6-axis gyroscope, the Q34U offers precise control and immersive feedback. Please read this manual carefully to ensure proper setup and optimal use of your new gaming controller.

Package Contents
Ensure all items are present in the package:
- Shanwan Q34U Gaming Controller (Handle) x 1
- Instruction Manual x 1
- USB Cable x 1 (for charging and wired connection)
- Wireless Receiver x 1 (optional, for X-Input mode only)
Setup
1. Charging the Controller
Before first use, fully charge the controller using the provided USB cable. Connect the USB cable to the controller's charging port and a compatible USB power source (e.g., computer USB port, USB wall adapter). The charging indicator will show the charging status and turn off when fully charged.
2. Connection Methods
The Q34U controller supports three primary connection methods:

- Wired (Optional): Connect the controller directly to your device (PC, Switch, PS4, Android, iOS) using the USB cable. This provides a stable, low-latency connection.
- Bluetooth: For wireless connection to Android, iOS, Switch, and PS4.
- Wireless Receiver (Optional, X-Input mode only): Plug the USB wireless receiver into your PC for a wireless connection in X-Input mode.
3. Mode Switching
The controller features a 4-speed mode switch (X/S/P/D) to select the appropriate operating mode for your platform. Locate the physical switch on the controller and slide it to the desired mode:

- X: X-Input Mode (for PC, Android, iOS Native Controller Games & Emulators)
- S: Switch Mode (for Nintendo Switch console games, Steam platform games, YUZU emulator)
- P: PS4 Mode (for PS4 console games, Steam platform games)
- D: HID & APP Mode (Connect to Gamepad SpaceApp for customization)
After selecting the mode, follow the pairing instructions for your specific device.
Operating Instructions
Controller Features Overview

- Dual-body Triggers: Switch between linear Hall triggers for precise control (256 levels) and micro triggers for quick, crisp firing response.
- Dual TMR Joysticks: Custom TMR joysticks with 50 million life cycles, offering stable and efficient precise operations with a dual 1KHz return rate (0.001 seconds delay). Features a POM wear-resistant ring design to reduce drift.
- Second-generation Dangling Cross Key: Composite mechanical keys provide more rapid response and eliminate dead angle rub movement compared to traditional rubber guide cross keys.
- Composite Micro Switch Buttons: (Optional Silicone Button Version) Designed for reliable operation with a 5,000,000 cycles lifespan.
- Two Back Buttons Expansion (M1, M2): Ergonomic dual-back keys allow for enhanced 8-finger gaming.
- Asymmetric Emergency Stop Motor: Provides clean, crisp physical stop feedback with instant vibration start/stop.
- Built-in Gyroscope: A 6-axis gyroscope enables precise motion control for realistic game scenarios.
- Elite-Level APP Compatibility: Connect to the Gamepad SpaceApp for DIY personal settings and expanded gameplay options.
Using the Gamepad SpaceApp (D Mode)
In 'D' (HID & APP) mode, you can connect your controller to the Gamepad SpaceApp for advanced customization. The app allows you to:
- Rebind keys
- Adjust motor vibration intensity
- Create macros
- Fine-tune joystick and trigger attributes
- Calibrate gyroscope
The Gamepad SpaceApp can be downloaded directly from Android app stores. For iOS, download from the App Store.

Maintenance
Cleaning
To clean your controller, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage the controller's finish and internal components.
Storage
Store the controller in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. When not in use for extended periods, ensure the controller is fully charged to maintain battery health. The controller has a standby time of 60 days when fully charged.
Battery Care
The controller is equipped with a 600mAh battery. To prolong battery life:
- Avoid completely draining the battery regularly.
- Charge the controller before storing it for long periods.
- Do not expose the controller to temperatures above 60°C (140°F) or below -10°C (14°F).
Troubleshooting
Controller Not Connecting/Pairing
- Check Battery: Ensure the controller is sufficiently charged.
- Correct Mode: Verify that the mode switch (X/S/P/D) is set to the correct position for your intended platform.
- Bluetooth Pairing: For Bluetooth connections, ensure your device's Bluetooth is on and the controller is in pairing mode. Remove any previous pairings and try again.
- Wireless Receiver: If using the receiver, ensure it is securely plugged into a USB port and the controller is in X-Input mode.
- Wired Connection: Try connecting the controller directly via USB cable to rule out wireless issues.
Buttons/Joysticks Not Responding
- Restart Controller: Turn the controller off and then on again.
- Recalibrate: If joysticks or triggers are drifting, use the Gamepad SpaceApp (in D mode) to recalibrate them.
- Test on Another Device: Try the controller on a different compatible device to determine if the issue is with the controller or the original device/game.
Motion Control Issues
- Recalibrate Gyroscope: Use the Gamepad SpaceApp to recalibrate the built-in gyroscope if motion controls are inaccurate.
- Game Compatibility: Ensure the game you are playing supports motion control.
Specifications
| Feature | Specification |
|---|---|
| Product Brand | ShanWan |
| Product Name | Wireless Gaming Controller |
| Product Model | Q34U |
| Working Voltage | DC 3.7V |
| Working Current (motor off) | 10-40mA |
| Charging Specification | DC 5V === 500mA |
| Sleep Current | <5uA |
| Bluetooth Transmission Distance | <8M |
| Battery Capacity | 600mAh |
| Standby Time (full charge) | 60 days |
| Interface Type | USB, Bluetooth |
| Compatible Platforms | PC, Android, iOS, Nintendo Switch, PS4 |
| Trigger Button Type | Hall-Linear |
| Battery Included | No (internal rechargeable battery) |
| Package | Yes |
| Origin | Mainland China |
| Type | Gamepads |
| Certification | CE |
| Sensory Support | Physical sensation (vibration) |
| Interchangeable Shell | Not supported |

User Tips
- Optimize for Game Type: Utilize the dual-body triggers effectively. Use linear Hall triggers for racing games or precise aiming where gradual input is key, and micro triggers for fast-paced shooters requiring quick, crisp actions.
- Customize with App: For a truly personalized experience, download the Gamepad SpaceApp. It allows for detailed button remapping, macro creation, and fine-tuning of joystick and trigger sensitivity, which can significantly enhance gameplay for different genres.
- Leverage Back Buttons: Program the M1 and M2 back buttons for frequently used in-game actions to improve reaction time and comfort, especially in competitive gaming.
- Platform Specific Modes: Always ensure the mode switch is set to the correct platform (X, S, P, D) before connecting to avoid compatibility issues and ensure all features function correctly.
- Motion Control Immersion: For games that support it, the 6-axis gyroscope can add a new layer of immersion. Experiment with motion control settings in the Gamepad SpaceApp to find your preferred sensitivity.
Warranty and Support
For any issues, questions, or support needs regarding your Shanwan Q34U Gaming Controller, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.