1. Introduction
Thank you for choosing the lessdot Pixel-Style Beacon Lamp. This desktop night light is designed to enhance your gaming atmosphere and provide decorative illumination. It features a pixelated design, four-color lighting, and a built-in rechargeable battery for convenient, wireless use. This manual provides essential information for the safe and efficient operation of your new beacon lamp.
Pixel-Style Beacon Lamp with turn-off effect and glowing light.
2. Safety Information
- Ensure the product is plugged in and activated for the first time before use.
- Do not place the light on a surface with a tilt angle greater than 6 degrees to prevent instability.
- The LED light source is not replaceable. When the light source reaches the end of its life, the entire lamp should be replaced.
- Keep out of reach of children.
- Do not disassemble, modify, or attempt to repair the product yourself. This will void the warranty and may cause damage or injury.
- Avoid exposure to extreme temperatures, direct sunlight, or high humidity.
3. Package Contents
Please check the package for the following items:
- 1 x Pixel-Style Beacon Lamp
- 1 x USB-C Charging Cable
4. Product Overview
Familiarize yourself with the components of your Beacon Lamp:
Product analysis diagram showing key features and components.
Key Components:
- Lamp Body: The main pixel-style cube housing the light.
- Toggle Switch: Located on the bottom, used for power ON/OFF and mode selection.
- Power Light: An indicator light for charging status and low power.
- Charging Port: USB-C port for recharging the internal battery.
5. Setup
- Initial Activation: Before first use, connect the provided USB-C charging cable to the lamp's charging port and a suitable USB power source (e.g., computer, wall adapter). The power light will indicate charging status.
- Placement: Place the beacon lamp on a stable, flat surface. Ensure the tilt angle is not more than 6 degrees to prevent it from falling.
Dimensions of the Beacon Lamp: 12cm x 12cm x 12cm.
6. Operating Instructions
The lamp is controlled by the toggle switch and tapping the lamp body.
6.1 Power On/Off
- OFF Gear: Slide the toggle switch to the 'OFF' position to turn off the lamp.
6.2 Warm Light Mode
- Slide the toggle switch to the 'ON' position.
- Tap the lamp body once to turn on the warm white light.
- Tap again to cycle through three levels of brightness.
- Tap a fourth time to turn off the light.
6.3 Four-Color Lighting Mode
- Slide the toggle switch to the 'ON' position.
- Tap the lamp body to turn on the light.
- Continue tapping the lamp body to cycle through the four available colors: Warm White, Red, Blue, and Green.
- Tap again after the last color to turn off the light.
The Beacon Lamp can display Warm White, Red, Blue, and Green light.
Four-color switching and Type-C charging port.
6.4 15-Minute Delay Mode (Timer)
- After turning on the lamp (either Warm Light or Four-Color mode), tap the lamp body to adjust the brightness (3 levels for Warm Light) or cycle through colors.
- The light will automatically turn off after 15 minutes.
6.5 Charging Indicators
- Low Power: The power light will flash.
- Charging: The power light will show a breathing effect.
- Full Battery: The power light will be normally on (solid).
7. Maintenance
- Cleaning: Wipe the lamp body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the lamp in a cool, dry place when not in use for extended periods.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the lamp regularly.
8. Troubleshooting
- Lamp does not turn on:
- Ensure the lamp is charged. Connect it to a power source using the USB-C cable. If it's the first time using it, ensure it has been activated by plugging it in.
- Light is dim or flickers:
- The battery may be low. Recharge the lamp fully.
- Cannot change colors or brightness:
- Ensure you are tapping the lamp body correctly. If the issue persists, try turning the lamp off and on again.
- Lamp falls over easily:
- Ensure it is placed on a stable, flat surface with a tilt angle not exceeding 6 degrees.
9. Specifications
| Feature | Detail |
|---|---|
| Product Name | Pixel-Style Beacon Lamp |
| Model Number | ZM-WDSJ-XBD |
| Dimensions | 12cm x 12cm x 12cm (138*116*58mm from OCR, using 12x12x12 from image for consistency with visual representation) |
| Weight | 125g |
| Materials | Eco-friendly ABS, HIPS, Silica gel |
| Light Colors | Warm White, Red, Blue, Green (4 colors) |
| Color Temperature | 3000K (Warm White) |
| Battery Capacity | 500mAh / 3.7V (from image, OCR states 1200mAh) |
| Rated Power | 3W |
| Charging Time | Approx. 4 hours |
| Battery Life | 8 hours (High Light), 200 hours (Low Light) |
| Charging Interface | USB-C |
10. User Tips
- Upon receiving your product, carefully inspect it for any manufacturing defects or damage.
- The atmospheric lighting is great for enhancing your gaming setup or creating a cozy ambiance.
11. Frequently Asked Questions (FAQ)
- Q: Does the Beacon Lamp come with a remote control?
- A: No, the Beacon Lamp does not come with a remote control. It is operated by a toggle switch and tapping the lamp body.
12. Warranty and Support
12.1 Warranty Information
This product comes with a 12-month warranty from the date of purchase. During this period, customers can receive free repair service by presenting proof of purchase. Paid service is available after the warranty period.
The warranty does not cover:
- Products not manufactured by our company.
- Damage caused by force majeure events (e.g., earthquake, fire).
- Damage due to human factors, including unauthorized disassembly, modification of components, incorrect installation, storage, or use not in accordance with instructions.
12.2 Manufacturer Information
Xiamen Bandian Originality Technology Co., LTD
3rd Floor, No.1709-1, Dianqian Community,Huli District, Xiamen, Fujian Province, China
Zip Code: 361006
Website: www.bandian.cc
Telephone: 0592-5082991
The manufacturer reserves all rights for the final explanation of these warranty terms.