Introduction
Foreword
Thank you for purchasing the Godox SKYTALK AIR Full-Duplex Wireless Intercom System. Please read this manual carefully before using the product to ensure correct operation and achieve optimum function.
Main Features
- Max. wireless transmission sight distance up to 500m.
- Environmental noise cancellation (ENC) for clear intercom.
- Provides 20-hour long-lasting battery life.
- Adaptive expansion system enables 2 to 5-user intercom.
- Detachable lithium battery supports charging via USB-C port or charging case.
- Lightweight and comfortable wearing and flexibly adjustable head circumference.
Safety Warnings
Please read and adhere to the following safety warnings to prevent damage to the product or injury to yourself.
- High-Precision Instrument: Avoid falling, collision, or pounding.
- Keep Out of Reach of Children: Small parts and batteries can be a choking hazard.
- Do Not Disassemble: Repairs should only be performed by our Company or an authorized maintenance center.
- Keep Dry: Do not use in rain or damp conditions.
- Avoid Extreme Environments: Do not leave or store the product in direct sunlight, near heating devices, or in hot, humid, or dusty conditions. Do not store if ambient temperature exceeds 60°C.
- Flammable/Explosive Environments: Do not use in such environments. Pay attention to relevant warning signs.
- Battery Safety: Keep small batteries out of reach of children. Never swallow batteries; if swallowed, seek medical attention immediately.
What's in the Box
The package for the Godox SKYTALK AIR system typically includes the following items:
Image: Contents of the Godox SKYTALK AIR package.
Standard Package Contents (for single headset unit):
- STA-CH08 Charging Case:
- Charging Case x1
- Charging Cord x1
- Instruction Manual x1
- SkyTalk Air Headset:
- Headset x1
- Battery x1
- Charging Cord x1
- Battery Cushion x1
- Microphone Cushion x1
- On-Ear Foam Cushion x1
- Over-Ear Foam Cushion x1
- Number Sticker x1
Note: Package contents may vary based on the specific kit (e.g., 3S, 4S, 5S versions will include multiple headsets and corresponding accessories).
Parts Overview
Headset Components
Image: Headset diagram with key components labeled.
- Battery Compartment Switch: Used to open the battery compartment.
- Volume Adjustment Dial: Rotate up to increase volume, rotate down to decrease volume.
- Microphone Rod: Lift up to turn on the microphone, lower to turn off the microphone.
- Pairing Button: Press and hold for 5 seconds to start pairing.
- Mute/PTT Mode Button: Toggles between mute and Push-To-Talk (PTT) modes.
- Indicator Switch: Displays status.
- Label Paste Site: (Red label for master headset, yellow label for remote headset).
Headset Side View
Image: Side view of the headset with additional ports and controls.
- External Antenna: For wireless transmission.
- USB-C Port: For charging the headset.
- Power Switch: To turn the headset on or off.
- 3.5mm Earphone Jack: For connecting an external earphone for monitoring.
Indicator Status Meanings
The LED indicator on the headset provides visual feedback on its status:
- Flash green slowly: Unpaired
- Constant on green: Paired
- Flash green rapidly: Pairing
- Breathe red: Low battery level
- Flash red and green quickly and alternately: Searching headset within group
- Constant on red: Mic off
- Flash blue slowly (in power off status): Charging
- Constant on blue for 5min then light off (in power off status): Fully charged
- Power it on and insert the charging cord: The indicator flashes blue slowly for 5s then enters working status.
Battery Charging Case Indicators
The charging case has eight indicators, corresponding to eight charging slots. The indicator lights up when the charging case is powered on and a lithium battery is inserted, and turns off when the battery is removed.
- Flash green: Charging
- Constant on green: Fully charged
- Red fast flash for 10s: Low temperature protection
Indicators after Inserting the Battery in Power off Status (Charging Case):
- Constant on red: Battery level 0%~40%
- Constant on yellow: Battery level 40%~80%
- Constant on green: Battery level 80%~100%
Setup
Installing/Disassembling the Battery
Image: Battery installation and removal process.
- Installation: Slide down the battery compartment switch and open the cover. Insert the battery into the battery compartment with the contacts facing inwards and close the cover.
- Disassembly: Slide up the battery compartment switch and open the cover, then you can take out the battery.
Pairing
The headsets are factory-paired out-of-the-box. Pairing is only required when connecting a new headset to an existing system. Ensure the master headset and other headsets are powered on and connected before starting the pairing process.
Image: Pairing process for master and remote headsets.
- Set Master/Remote: Designate one headset as the master headset and the others (1-4) as remote headsets.
- Initiate Pairing: Press and hold the pairing buttons of all headsets for 5 seconds. A voice announcement "to be connected" indicates successful connection. Pressing the pairing button of a specific headset will announce if it's a master or remote headset.
- Reboot: Reboot all headsets. They are now ready for use.
Notes:
- One master headset can be connected to a maximum of four remote headsets.
- Master and remote headsets are factory-paired.
Operating Instructions
Searching for Headsets
To quickly identify headsets within the same group, press the searching button twice quickly. The indicators of all headsets will flash red and green quickly and alternately for 15 seconds.
Mute Mode / PTT Mode (Mic On Status)
- Press and hold: Activates PTT mode.
- Release: Mutes the microphone.
- Press once: Resumes to duplex intercom mode.
Volume Adjustment
Rotate the Volume Adjustment Dial:
- Rotate up: Increases volume.
- Rotate down: Decreases volume.
Turning On/Off the Microphone
The microphone can be worn on either the left or right side and adjusted up and down by 270 degrees.
- Lowering the Microphone Rod: Enables monitoring and sound pickup, accompanied by a voice announcement of "Microphone on".
- Lifting the Microphone Rod (within 90 degrees): Disables sound pickup, accompanied by a voice announcement of "Microphone off".
Monitoring through the External Earphone
Connect an external earphone to the 3.5mm earphone jack on the headset to monitor the intercom audio.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the headset and charging case. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, charge the batteries regularly and avoid complete discharge. If storing for extended periods, charge the batteries to approximately 50% capacity.
Troubleshooting
- No Power: Ensure the battery is correctly installed and charged. Check the power switch.
- No Sound/Poor Audio:
- Check the volume level using the adjustment dial.
- Ensure the microphone rod is in the 'on' position (lowered).
- Verify that headsets are properly paired (constant green indicator).
- If using an external earphone, ensure it is securely connected.
- Interference: If experiencing radio or television interference, try reorienting or relocating the receiving antenna, increasing the separation between equipment, or connecting the equipment to a different circuit.
- Pairing Issues: If new headsets are not pairing, ensure all existing headsets are powered on and connected before attempting to pair the new unit.
Specifications
| Parameter | Headset (SkyTalk Air) | Battery Charging Case (STA-CH08) |
|---|---|---|
| Wireless Band | 2.4GHz | - |
| Max. Transmission Distance | 500m | - |
| Frequency Response | 150Hz-7KHz | - |
| Signal to Noise Ratio | ≥71dB @94dBSPL, 1KHz | - |
| Max SPL | >115dBSPL | - |
| Lithium Battery Parameters | DC3.8V, 760mAh, 2.888Wh | - |
| USB-C Input | 5V⎓0.6A | 5V⎓2A, 9V⎓2A |
| USB-C Output | - | 4.35V⎓0.2A |
| Charging Time (USB-C Charging) | Approx. 2h | - |
| Battery Life | Approx. 20h | - |
| Adjustable Head Circumference Range | Approx. 54-58cm | - |
| Working Environment Temperature | 0°C ~ 40°C | |
| Net Weight (With Battery) | Approx. 207g | Approx. 156g |
Specifications and data may be subject to changes without notice.
Wireless Performance
- Operating Frequency: 2404MHz-2424MHz, 2428MHz-2478MHz
- SkyTalk Air Maximum EIRP Power: -11.08dBm
User Tips
- Environmental Noise Cancellation (ENC): The system features pro-grade ENC for clear communication, which is particularly useful in noisy environments.
- Latency: While designed for real-time monitoring, some users have noted a slight delay compared to other professional systems. This may be a factor to consider for highly time-sensitive applications.
- Charging Case: The STA-CH08 charging case is included with multi-headset kits and provides convenient charging for multiple batteries. Ensure you are using the correct charging cords provided.
Warranty & Support
This warranty card is an important certificate for maintenance service. Please fill it out and keep it safe.
Warranty Period
The warranty period for products and accessories is calculated from the purchase date registered on the warranty card.
| Product Type | Name | Warranty Period (Months) | Warranty Service Type |
|---|---|---|---|
| Parts | Product Main Body (Headset) | 12 | Customer sends the product to designated site |
| Battery | 3 | ||
| Charger, Electrical Parts etc. | 12 | ||
| Other Items | Power Cable, Sync Cable, Battery Case, Windscreen Foam, Wind Cap, Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package etc. | No warranty | |
Inapplicable Cases for Warranty
The guarantee and service are not applicable in the following situations:
- Product or accessory has exceeded its warranty period.
- Breakage or damage caused by inappropriate usage, maintenance, or preservation (e.g., improper packing, usage, plugging in/out, falling off, squeezing, exposure to improper temperature, solvents, water, etc.).
- Breakage or damage caused by non-authorized institution or staff during installation, maintenance, alteration, addition, and detachment.
- Original identifying information of product or accessory is modified, alternated, or removed.
- No valid warranty card.
- Breakage or damage caused by using illegally authorized, nonstandard, or non-public released software.
- Breakage or damage caused by force majeure or accident.
- Breakage or damage that could not be attributed to the product itself.
In such cases, Godox assumes no responsibility. Normal discoloration, abrasion, and consumption are not considered breakage within the maintenance scope.
How to Get Maintenance Service
For maintenance service, contact your product distributor or authorized service institutions. You can also contact Godox after-sale service directly. Provide a valid warranty card. If a valid warranty card cannot be provided, service may still be offered if the product is confirmed to be within the maintenance scope, but this is not an obligation.
Godox After-sale Service Call: 0755-29609320-8062
Email: godox@godox.com
Website: www.godox.com
User Manual PDF: View User Manual (PDF)
Regulatory Information
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC Warning
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) Cet appareil ne peut pas causer d'interférences, et
(2) Cet appareil doit accepter toute interférence, y compris celles qui pourraient entraîner un fonctionnement accidentel de l'appareil.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Tout changement ou modifcation non expressément approuvé par la partie responsible de la conformité pourrait annuler l'autorité de l'utilisateur à faire fonctionner l'équipement.
RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Avertissement RF pour les appareils portables: L'appareil a été évalué pour répondre aux exigences générales d'exposition aux radiofréquences (RF). L'appareil peut être utilisé dans des conditions d'exposition portable sans restriction.