Introduction
Your Phonak Naida P-UP hearing aids are designed to provide an optimal listening experience for individuals with mild to moderately-severe hearing loss. Developed by Phonak, a world leader in hearing solutions, these premium products are the result of extensive research and expertise.
This manual provides essential information to help you get the best out of your hearing aids, covering features, benefits, setup, use, and maintenance. For further details, you may consult your hearing care professional or the manufacturer's representative.
Important Safety Information
⚠ Warning:
- If you are younger than 18, do not use this device. Consult a doctor, preferably an ear-nose-throat doctor (an ENT), as your condition requires specialized care. Over-the-counter hearing aids are only for users who are age 18 or older.
- Your hearing aids operate between 2.4 GHz - 2.48 GHz frequency range. When flying, please check if the flight operator requires devices to be switched into flight mode.
For more information regarding product safety, refer to chapter 21.2 of the full user guide (PDF).
Product Overview and Components
The Phonak Naida P-UP hearing aid features a robust design with essential components for optimal performance.
Key Components:
- Hook / Sound Output: Directs amplified sound into the ear.
- Multi-function Button: Used for volume control, program changes, and call management.
- Battery Door: Houses the battery and acts as the on/off switch.
- Earpiece: Can be a classic earmold or universal eartip.
Left & Right Hearing Aid Markings:
To distinguish between left and right hearing aids:
- Blue marking: Indicates the left hearing aid.
- Red marking: Indicates the right hearing aid.
Setup
1. Battery Insertion
The Phonak Naida P-UP uses a size 675 zinc-air battery. Always have a new battery on hand.
- Remove the sticker from the new battery and wait two minutes.
- Open the battery door.
- Place the battery in the battery door with the "+" symbol facing upwards.
ⓘ Note:
If it is difficult to close the battery door, check that the battery is inserted correctly and the "+" symbol is facing upwards. Incorrect insertion can damage the battery door or prevent the hearing aid from working.
2. Turning On/Off
The battery door also functions as the on/off switch.
- To turn On: Close the battery door. You may hear a start-up melody.
- To turn Off: Open the battery door.
3. Putting on the Hearing Aid
For classic earmolds:
- Take the earmold up to your ear and place the ear canal part into your ear canal.
- Place the hearing aid behind your ear.
- Insert the upper part of the earmold into the upper part of the bowl of your ear.
4. Removing the Hearing Aid
- Lift the hearing aid above the upper part of your ear.
- Grasp the earmold with your fingers and gently remove it.
ⓘ Note:
Avoid gripping the tube to remove the hearing aid.
Operating Instructions
Multi-function Button
The multi-function button serves several purposes:
- Volume Control: Adjusts the hearing aid volume.
- Program Change: Switches between different hearing aid programs (as programmed by your hearing care professional).
- Call Management (with Bluetooth enabled phone):
- Short press (less than 2 seconds) to accept an incoming call.
- Long press (more than 2 seconds) to reject or end an incoming call.
Bluetooth Connectivity
Your Phonak Naida P-UP hearing aids can connect directly to Bluetooth-enabled devices like smartphones, computers, and TVs, offering true wireless freedom.
Initial Pairing:
ⓘ Important:
Pairing is only necessary once per device. After initial pairing, your hearing aids will automatically connect to the device when switched on. The process can take up to 2 minutes.
- On your device (e.g., a phone), ensure Bluetooth wireless technology is enabled and search for Bluetooth enabled devices in the connectivity settings menu.
- Switch on both hearing aids. You have 3 minutes to pair them with your device.
- Select the hearing aid from the list of Bluetooth enabled devices to simultaneously pair both hearing aids. A beep confirms successful pairing.
For more information about pairing instructions specific to popular phone manufacturers, visit: www.phonak.com/com/en/support.html
Connecting to the Device:
Once paired, the connection will be maintained as long as the device remains ON and within range. Your hearing aids can be connected to up to two devices and paired to up to eight devices.
Phone Calls
When paired and connected to your phone, you will hear the caller's voice directly in your hearing aids. Your hearing aids will pick up and transmit your voice to the phone.
- Making a Call: Enter the phone number and press the dial button on your phone. You will hear the ring tone through your hearing aids.
- Accepting a Call: When receiving a call, a notification will be heard. Short press the upper or lower part of the multi-function button (less than 2 seconds) or accept directly on your phone.
- Ending a Call: Long press the upper or lower part of the multi-function button (more than 2 seconds) or end directly on your phone.
- Rejecting a Call: Long press the upper or lower part of the multi-function button (more than 2 seconds) or reject directly on your phone.
Flight Mode
To disable Bluetooth connectivity (e.g., during flights):
- Open the battery door.
- Hold down the lower part of the multi-function button for 7 seconds while closing the battery door.
In flight mode, your hearing aid cannot connect directly to your phone.
Exiting Flight Mode:
- Open the battery door.
- Close the battery door again.
Smart Application
The Phonak app allows for intelligent remote control and personalization of your hearing aids.
- Control hearing aid volume
- Select manual procedure
- Setting the ambient balance of streaming and outside sound
- Check the volume on your phone
- Adjust tinnitus masking
- Set frequently used programs to your personal preferences
- View the average daily wear and use of hearing aids
Maintenance
General Information
Diligent and routine care contributes to outstanding performance and a long service life. Always store your hearing aid in a safe, dry, and clean place. When not in use, leave the battery door open to allow moisture to evaporate. Always completely dry your hearing aid after use.
ⓘ Note:
Before using hair spray or applying cosmetics, remove your hearing aid from your ear to prevent damage.
Cleaning Schedule
- Daily: Inspect the earpiece and tube for earwax and moisture. Clean surfaces with a lint-free cloth. Do not use household detergents, soap, or rinse with water. For intensive cleaning, consult your hearing care professional.
- Weekly: Clean the earpiece with a soft, damp cloth or a special cleaning cloth for hearing aids.
- Monthly: Inspect the hearing tube for color changes, hardening, or cracks. If changes occur, the hearing tube must be replaced by your hearing care professional.
Earpiece Exchange
Regularly check and exchange or clean the earpiece if it appears dirty or if the hearing aid volume or sound quality is reduced.
Water, Sweat, and Dust Resistance (IP68)
These hearing aids are classified IP68, meaning they are resistant to water (depth of 1 meter for 60 minutes), sweat, and dust. You do not need to worry about exposing them to rain showers or sweat.
⚠ Important:
- Ensure the battery door is fully closed, with no foreign objects (like hair) caught in it.
- After exposure to water, sweat, or dust, clean and dry the hearing aid.
- These hearing aids are NOT intended for use in water activities involving chlorinated water, soap, salt water, or other liquids with chemical content.
- Using the hearing aid around water can restrict airflow to the batteries, causing it to stop working. If this happens, refer to the troubleshooting section.
Troubleshooting
If you encounter any issues with your hearing aid, refer to the table below. If the problem persists, contact your hearing care professional for assistance.
| Problem | Possible Cause | What to Do |
|---|---|---|
| Hearing aid not functioning | Dead battery, Earpiece blocked, Battery not inserted correctly, Hearing aid switched off | Change battery (chapter 5), Clean earpiece (chapter 15), Insert battery correctly (chapter 5), Switch hearing aid on by completely closing battery door (chapter 4) |
| Hearing aid whistles | Hearing aid not inserted correctly | Insert hearing aid correctly (chapter 6) |
| Earwax in ear canal | Contact your hearing care professional | Contact your hearing care professional |
| Hearing aid too loud | Volume too loud | Decrease volume if volume control available (chapter 8) |
| Hearing aid not loud enough or distorted | Low battery, Earpiece blocked, Volume too low, Hearing has changed | Change battery (chapter 5), Clean earpiece (chapter 15), Turn volume up if volume control available (chapter 8), Contact your hearing care professional |
| Hearing aid plays two beeps | Indication for low battery | Change battery within the next 30 minutes (chapter 5) |
| Hearing aid switches on and off (intermittent) | Moisture on battery or hearing aid | Wipe battery and hearing aid with dry cloth |
| Phone call function does not work | Hearing aid is in flight mode, Hearing aid not paired to the phone | Open and close battery door (chapter 12.2), Pair it to the phone (chapter 10) |
For further information, visit: www.phonak.com/com/en/support.html
Specifications
Models Covered:
- Phonak Naída P90-UP
- Phonak Naída P70-UP
- Phonak Naída P50-UP
- Phonak Naída P30-UP
- Phonak Naída P-UP Trial
Battery Information:
- Battery Type: Size 675 zinc-air battery
- Low Power Indication: Two beeps (approx. 30 minutes remaining)
- IEC Code: PR44
- ANSI Code: 7003ZD
Radio Information:
- Antenna Type: Resonant loop antenna
- Operation Frequency: 2.4 GHz – 2.48 GHz
- Modulation: GFSK, Pi/4 DPSK, GMSK
- Radiated Power: < 1 mW
- Bluetooth Version: 4.2 Dual-Mode
- Bluetooth Range: ~1m
- Profiles Supported: HFP (Hands-free profile), A2DP
- FCC ID: KWC-BPZ
- IC: 2262A-BPZ
Physical Specifications:
- Dimensions (L x W x H): 25 x 16 x 8 cm
- Weight: 0.35 kg
Operating, Transport, and Storage Conditions:
| Condition | Use | Transport | Storage |
|---|---|---|---|
| Temperature | +5°C to +40°C (41°F to 104°F) | -20°C to +60°C (-4°F to 140°F) | -20°C to +60°C (-4°F to 140°F) |
| Humidity | 30% to 85% (non-condensing) | 0% to 90% (non-condensing) | 0% to 70% (non-condensing) |
| Atmospheric Pressure | 500 to 1060 hPa | 500 to 1060 hPa | 500 to 1060 hPa |
Performance Levels (AutoSense OS 4.0):
The table above details the features available across the Premium (P90), Advanced (P70), Standard (P50), and Essential (P30) performance levels, including aspects like comfort in various environments, noise cancellation, speech enhancement, and streaming programs.
User Tips
- Personalized Programming: For the best fit, provide your hearing care professional with a copy of your most recent hearing test/audiogram. If unavailable, a general programming can be done based on your hearing description, though it may be less accurate. You can always seek a local provider for programming at any time.
- App Control: Utilize the dedicated Phonak app for fine-tuning your hearing experience, including volume adjustments, program selection, and manual noise cancellation.
Warranty and Support
Local Warranty
Please consult your hearing care professional where you purchased your hearing aid for specific local warranty terms.
International Warranty
Sonova AG offers a one-year limited international warranty, valid from the date of purchase. This warranty covers manufacturing and material defects in the hearing aid itself, but excludes accessories such as batteries, tubes, and earmolds. The warranty is valid only with proof of purchase.
This international warranty does not affect any legal rights you may have under applicable national legislation governing the sale of consumer goods.
Warranty Limitation
This warranty does not cover damage from improper handling or care, exposure to chemicals, or undue stress. Damage caused by third parties or non-authorized service centers voids the warranty. It also does not cover services performed by a hearing care professional in their office.
For support and further information, please visit: www.phonak.com/com/en/support.html
Compliance Information
Europe: Declaration of Conformity
Sonova AG declares that this product meets the requirements of the Medical Devices Directive 93/42/EEC and the Radio Equipment Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be obtained from the manufacturer or local Phonak representative.
USA & Canada: FCC & IC Compliance
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by Sonova AG could void the user's authority to operate the device.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If interference occurs, try reorienting the receiving antenna, increasing separation between devices, connecting to a different circuit, or consulting a dealer/technician.
Video Guide
Watch this official video for a visual guide on using your Phonak Naida P-UP hearing aids.
Official product video demonstrating features and usage of the Phonak Naida P-UP hearing aids.
Additional Resources
A detailed user manual in PDF format is available for download. This document contains comprehensive information on all aspects of your hearing aid, including advanced features and detailed compliance data.
You can view the PDF manual here: Phonak Naida P-UP User Manual (PDF)