MT Helmets ATOM SV

Contents

MT ATOM SV Flip Up Motorcycle Helmet User Manual

Model: ATOM SV

1. Introduction

Thank you for choosing the MT ATOM SV Flip Up Motorcycle Helmet. This manual provides essential information for the proper use, care, and maintenance of your helmet. Please read it thoroughly before using your helmet to ensure maximum safety and performance.

Product Overview

  • Product Name: Adult/Youth Multi-Sport Safety Helmet (MT ATOM SV Flip Up Motorcycle Helmet)
  • Material: High-impact resistant PC/ABS engineering plastic outer shell
  • Inner Lining: High-density EPS shock-absorbing foam
  • Weight: Approximately 1550g ± 50g
  • Certifications: DOT, ECE-R22/05, NBR7471, NTC 4533
  • Helmet Style: Flip Up Helmet
  • Gender: Unisex
  • Intended Use: Motorcycle riding, racing, and off-road use.
MT ATOM SV Flip Up Motorcycle Helmet
Front view of the MT ATOM SV Flip Up Motorcycle Helmet.

2. Safety Warnings

WARNING!

  • This helmet protects against head injuries during intended sports use. It CANNOT prevent all injuries in severe crashes.
  • Replace helmet IMMEDIATELY after any crash, impact, or visible damage (cracks, dents, deformation), even if it appears minor.
  • Do NOT modify, remove, or alter any original parts (shell, lining, straps, buckles).
  • Do NOT expose the helmet to temperatures above 60°C (140°F) (e.g., car dashboard, direct sunlight), as this can compromise its structural integrity.
  • Keep away from chemicals, solvents, gasoline, and sharp objects, which can damage the helmet materials.
  • Children must be supervised by adults. Do not wear during climbing or activities where hanging/strangulation risk exists.
  • A helmet has a service life of 3-5 years from the date of manufacture; replace it even if it appears undamaged after this period.
Helmet Certifications
The MT ATOM SV helmet is certified by DOT, ECE/ONU 22.05.P, NBR7471, and NTC 4533.

3. Setup and Components

Key Components

  • Outer Visor: Clear, panoramic anti-scratch lens, Pinlock ready.
  • Inner Sun Lens: Retractable sun visor for varying light conditions.
  • Ventilation System: Top air inlet switch, front nozzle air inlet switch, rear exhaust air hole for optimal airflow.
  • Lining: Fully removable and washable, multi-density inner latex, rhomboid sweat-wicking lining.
  • Retention System: Quick-release buckle.
  • Bluetooth Compatibility: Reserved Bluetooth headphone hole for easy installation without modification.
ATOM SV Helmet Features Diagram
Diagram illustrating key features of the ATOM SV helmet, including shell sizes, weight, air input, aerodynamic contour, quick removal of sun visor, inner sun visor, Pinlock readiness, scratch resistant visor, visor shut down system, multi-density inner latex, flame retardant fabric, composite inner fabric, brand logo relief, removable and washable lining, and quick release buckle.
Helmet Ventilation and Lens Details
Detailed view of the top air inlet switch, front nozzle air inlet switch, rear exhaust air hole, and quick-release lens base.

4. Operating Instructions

4.1. How To Properly Fit & Wear

  1. Size Selection: Measure your head circumference 1-2 cm above your eyebrows. Refer to the size chart in the Specifications section to choose the corresponding size.
  2. Positioning: Place the helmet level on your head, ensuring the front edge is 1-2 fingers above your eyebrows. Do not wear it too far back or forward.
  3. Strap Adjustment:
    • Ensure the side straps form a Y-shape under your ears.
    • Fasten the chin strap snugly, allowing only one finger space between the strap and your chin.
    • Tighten or loosen the rear dial (if equipped) for a secure fit.
  4. Final Check: Open your mouth wide; the helmet should pull down slightly. Shake your head gently; the helmet must not shift.
Head Measurement Method
Illustration of the head measurement method for proper helmet sizing.

4.2. Flip-Up Mechanism

The MT ATOM SV features a versatile 90° flip-up mechanism, allowing you to switch between full-face and open-face configurations. To operate:

  • To lift the chin bar: Press the red button/cloth on the inner side of the chin bar and lift the entire front section upwards at the same time.
  • To lower the chin bar: Push the chin bar down until it securely locks into place.
Helmet Flip-Up Mechanism
Demonstration of the 90° flip-up switch mechanism.

4.3. Inner Sun Lens Operation

The helmet is equipped with an inner sun lens for sun protection. To operate:

  • To deploy the inner sun lens: Tap the red button located on the side of the helmet.
  • To retract the inner sun lens: Lightly press the black button, also located on the side, to retract the inner lens.
Inner Sun Lens Controls
Controls for deploying and retracting the inner sun lens.

4.4. Ventilation System

Adjust the helmet's airflow using the integrated ventilation switches:

  • Top Air Inlet Switch: Located on the top of the helmet, this switch controls the main air intake.
  • Front Nozzle Air Inlet Switch: Positioned on the front chin bar, tap the bottom to switch and adjust airflow to the face.
  • Rear Exhaust Air Hole: Located at the back, this works with the inlet vents to create a convection system for efficient air circulation.
Helmet Aerodynamics and Ventilation
Diagram showing air inlet and outlet points for optimized aerodynamics and ventilation.

5. Maintenance

5.1. Cleaning the Helmet

  • Outer Shell: Clean with a soft, damp cloth and mild soap. Avoid abrasive cleaners or solvents.
  • Visors: Use a soft cloth and clean water. For stubborn dirt, use a specialized helmet visor cleaner. Do not use harsh chemicals.
  • Inner Lining: The inner lining is fully removable and washable. Detach the lining components and hand wash them with mild soap and water. Allow to air dry completely before re-installing.
Removable and Washable Lining
Image showing the fully removable and washable inner lining for easy cleaning.

5.2. Storage

Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the helmet, which could deform its shape or damage its protective layers.

6. Troubleshooting

If you encounter any issues with your helmet, please refer to the following common solutions:

  • Visor not closing properly: Check for any obstructions in the visor mechanism or ensure the visor is correctly seated in its mounts.
  • Loose fit: Re-adjust the chin strap and, if applicable, the rear dial for a snug fit. Refer to the "How To Properly Fit & Wear" section.
  • Excessive noise: Ensure all vents are closed if you prefer less airflow and noise. Check that the visor is fully closed and sealed.

For persistent issues or concerns about the helmet's integrity, contact customer support.

7. Specifications

Attribute Value
Model Origin ATOM SV
Material ABS (Outer Shell)
Weight Approx. 1550g ± 50g
Dimensions Approx. 37.5cm * 26cm * 25.7cm
Quality Certificate DOT, ECE-R22/05, NBR7471, NTC 4533
Helmet Style Flip Up Helmet
Gender Unisex
Origin Mainland China
Item Type Helmets

Size Selection Chart

Size Head Circumference (cm) International Labeling
M 52-53 M
L 54-55 L
XL 56-57 XL
2XL 58-59 XXL
3XL 60-61 XXXL
4XL 62-64 XXXXL
Size Chart and Measurement Method
Detailed size selection chart and head measurement method.

8. User Tips

  • Accurate Sizing: Always measure your head carefully before selecting a size. If you are between sizes, consider trying both to ensure the most secure and comfortable fit. A helmet that is too loose will not provide adequate protection.
  • Visor Care: To maintain clear vision, regularly clean both the outer and inner visors. Avoid touching the inner surface of the Pinlock-ready visor to prevent damage to its anti-fog properties.
  • Ventilation Adjustment: Experiment with the various air inlet and exhaust switches to find the optimal airflow for different riding conditions and temperatures.
  • Bluetooth Integration: Utilize the reserved headphone hole for easy installation of a Bluetooth communication system, enhancing your riding experience without compromising helmet integrity.

9. Frequently Asked Questions (FAQ)

Q: Is the XXL size available, and what is its head circumference?
A: Yes, the XXL size is available. According to the size chart, the XXL (labeled as 2XL) corresponds to a head circumference of 58-59 cm. For international labeling, this is often referred to as XXL. Please refer to the size chart in the Specifications section for detailed measurements.

10. Warranty and Support

Your MT ATOM SV helmet is manufactured to high-quality standards. For any manufacturing defects or issues not covered by normal wear and tear, please contact your retailer or the manufacturer's customer service for warranty claims and support.

Always retain your proof of purchase for warranty purposes.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.