Introduction
The Unnlink Borderless Mouse Sharer (Model 2234) is a pure hardware KVM switch designed for seamless control of two computers using a single mouse and keyboard. It supports cross-system operation (Windows, macOS, Linux) without the need for network connection, software installation, or drivers. Simply plug and play for efficient multi-PC workflow.

Figure 1: Unnlink Mouse Through Screen KVM Switch in action, showing mouse cursor moving between two PCs.

Figure 2: Comparison of Unnlink Pure Hardware Switching versus typical software-based solutions.
Package Contents
Please ensure all accessories are complete before use. The package contents vary based on the connectivity type of your computers:
For 2 PC Type-C (Both computers have Type-C ports):
- 1 × Borderless Mouse Sharer
- 2 × Type-C to Type-C Cable
- 1 × Portable Lanyard
- 1 × User Manual
For 2 PC USB (Both computers have USB ports):
- 1 × Borderless Mouse Sharer
- 2 × USB to Type-C Cable
- 1 × Portable Lanyard
- 1 × User Manual
For 1 PC Type-C + 1 PC USB (One computer has a Type-C port, the other has a USB port):
- 1 × Borderless Mouse Sharer
- 1 × Type-C to Type-C Cable
- 1 × USB to Type-C Cable
- 1 × Portable Lanyard
- 1 × User Manual
Setup Instructions
- Connect to PCs: Connect the PC1 and PC2 ports on the Unnlink Mouse Sharer to your respective computer's USB or Type-C ports. Ensure you use the correct accessory cables provided for your setup.
- Connect Peripherals: Connect your mouse and keyboard to the two USB ports on the Unnlink Mouse Sharer.
- Power On: Ensure both connected computers are powered on. The Unnlink Mouse Sharer does not require an external power adapter.
- Verify Connection: The indicator light on the sharer will clearly display which of the two computers is currently active. The light corresponding to the working computer will illuminate.

Figure 3: Connect PC1 and PC2 ports to your computers.

Figure 4: Connect your mouse and keyboard to the sharer.

Figure 5: PC1 and PC2 indicator lights.
Video 1: Product demonstration showing setup and seamless mouse switching.
Operating Instructions
- Seamless Switching: To switch control between computers, simply swipe your mouse cursor to the edge of the screen of the active computer. The cursor will automatically appear on the adjacent screen of the other computer, and your keyboard input will follow.
- Indicator Lights: The LED indicators on the device will show which computer is currently being controlled.

Figure 6: Mouse cursor seamlessly crossing between PC1 and PC2 screens.
Important Notes:
- This device is Not Available in Expanding Screen Mode. It is designed for switching between distinct computer displays.
- For computers using Type-C ports, ensure that the Type-C port supports data transmission functionality for proper operation.
Maintenance
To ensure the longevity and optimal performance of your Unnlink Borderless Mouse Sharer, please follow these guidelines:
- Keep the device in a normal temperature environment.
- Avoid exposing the device to humid or wet environments.
- Do not place the device in areas with high temperatures, excessive dust, corrosive substances, or oxidizing gases.
- Do not disassemble or attempt to repair any parts of the machine.
- Avoid strong vibrations, impacts, or dropping the device.
Troubleshooting
1. Unable to pass through the screen:
- Check if one of the device indicator lights (PC1 or PC2) is illuminated.
- Ensure that the Type-C port of your computer supports data transmission functionality.
- If you are not using the Unnlink-provided cables, please ensure that the cables you are using support data transmission functionality.
2. When the computer is in expansion mode, mouse cannot be moved to the expansion screen:
This is expected behavior. Moving the mouse to the edge of the screen will automatically recognize cross-screen movements and jump directly to the screen of another computer, not to an expanded portion of the same computer's display.
3. After the computer goes into sleep mode, it cannot be awakened:
You may need to adjust your computer's power-saving settings. Disable features that allow USB devices to stop working after the computer enters sleep mode.
4. Keyboard issues (garbled input, continuous input, connection drops):
Some keyboards may have compatibility issues. If you experience these problems, try using a different keyboard to see if the issue persists. Ensure your keyboard is a standard USB HID device.
Specifications
| Brand | Unnlink |
| Product Name | Borderless Mouse Sharer |
| Model | 2234 |
| Function | 2 Computers Share 1 Set of Mouse Keyboard |
| Driver | Free Driver, Plug and Play |
| Application | PC |
| Output | USB |
| Input | Other (USB/Type-C from PC) |
| Type | KVM Switches |
| Origin | Mainland China |
| High-concerned chemical | None |
User Tips
- Effortless Switching: Remember, there's no button to press! Simply move your mouse cursor to the edge of your active screen to seamlessly switch control to the adjacent computer.
- Cross-System Compatibility: This device works flawlessly across different operating systems, including Windows, macOS, and Linux, making it ideal for mixed environments.
- Keyboard Compatibility: If you encounter issues with your keyboard (e.g., garbled input, continuous key presses, or disconnections), try using a different keyboard. Some specific keyboard models might have compatibility quirks.
- Multi-Monitor Setup: If one of your PCs uses multiple monitors, the KVM switch might primarily operate with the main display of that PC when switching.
- Type-C Port Functionality: For optimal performance with Type-C connections, ensure your computer's Type-C port supports data transmission.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer/manufacturer directly. Keep your proof of purchase for warranty claims.