pgm HXQ006

Contents

PGM CHECK-GO PRO Golf Electric Scriber User Manual

Model: HXQ006

Introduction

The PGM CHECK-GO PRO Golf Electric Scriber is designed to help golfers improve their game by accurately identifying the center of gravity and marking an alignment line on golf balls. This precision marking can lead to greater accuracy and distance in drives and putts, reducing hooks and slices.

This manual provides detailed instructions for the safe and effective use of your CHECK-GO PRO device. Please read it thoroughly before operation.

PGM CHECK-GO PRO device and packaging

Image: PGM CHECK-GO PRO device and packaging.

Parts Diagram

Familiarize yourself with the components of your CHECK-GO PRO device:

Diagram of Check-Go Pro components and usage steps

Diagram: Components of the Check-Go Pro, including the Dome-Shaped Guard Template, High Speed Rotation Plate, Battery Compartment Lid/Pen Holder, Screw, 2 AA batteries, and Pen/Marker.

  • Dome-Shaped Guard Template: Protects the ball during rotation and guides the marker.
  • High Speed Rotation Plate: Holds and spins the golf ball.
  • Battery Compartment Lid/Pen Holder: Secures batteries and stores the marker pen.
  • Screw: Secures the battery compartment lid.
  • ON Button: Activates the rotation plate and LED indicator.
  • LED Speed Indicator: Indicates the device's status (blinking green for searching, solid green for stable rotation).
  • Pen/Marker: Used for marking the golf ball.

Setup

  1. Battery Installation:

    If not already installed, use a Phillips head screwdriver to remove the screw on the bottom of the unit. Remove the battery compartment lid/pen holder. Insert 2 AA batteries, ensuring correct polarity. Replace the lid and screw.

  2. Prepare the Device:

    Remove the Dome-Shaped Guard Template from the top of the unit.

  3. Place Golf Ball:

    Place a golf ball onto the unit's High Speed Rotation Plate. Ensure the ball is seated properly.

  4. Replace Guard Template:

    Replace the Dome-Shaped Guard Template over the golf ball.

Check-Go Pro device with lid removed, showing a golf ball inside

Image: Check-Go Pro device with the dome-shaped guard removed, showing a golf ball placed on the rotation plate.

Operating Instructions

  1. Initiate Rotation:

    While holding the unit on a level surface, press and hold the ON Button. The ball will begin spinning. The LED Speed Indicator light will glow green. Initially, it may blink, indicating it's searching for the center of gravity. Keep holding the button until the LED glows a steady green. This typically takes approximately 15 seconds and allows the ball to spin on a steady axis.

    Important: Do not stop the rotation by force during this process.

  2. Marking the Dot (Optional):

    While the ball is spinning and the LED is solid green, mark a dot by lightly touching the marker on the ball through the center hole on top of the dome.

  3. Marking the Equator Line:

    Continue to hold the ON Button. Place the marker in the hole as shown in the parts diagram. Gently touch the marker tip to the ball as it rotates. A line will be drawn marking the equator on the ball, indicating the most stable axis (center of gravity).

    Close-up of hands marking a golf ball using the Check-Go Pro device

    Image: Close-up of the marking process, showing the pen inserted into the device to draw a line on the spinning golf ball.

  4. Alternative Line Marking (Optional):

    If a partial or bolder line is desired, remove the dome and pen. Turn the unit upside-down and place the ball in the cup on the bottom of the unit. If only a dot was made, line up the dot facing upwards, centered in the cup. If an equator was drawn, line up the equator with the edge of the cup. Draw a line where the edge of the cup meets the ball while holding the ball secure with your other hand.

  5. Using the Marked Ball:

    When teeing off and putting, position the ball with the marked dot pointing to an imaginary point midway between your feet, and the equator line pointing toward the target. This ensures you are hitting the ball on its most stable axis.

Video: Demonstration of the PGM CHECK-GO PRO in action, showing how to place the ball, activate the device, and mark the center of gravity line.

Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
  • Battery Replacement: When the device's performance degrades (e.g., inconsistent spinning, dim LED), it's time to replace the batteries. Follow the battery installation steps in the Setup section.
  • Storage: Store the CHECK-GO PRO in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Problem Possible Cause Solution
Ball wobbles or shakes during rotation. Uneven surface; ball not seated correctly; initial instability. Ensure the device is on a flat, stable surface. Release the ON Button and press it again until the ball achieves stable rotation and the LED glows solid green.
LED does not glow solid green after 15 seconds. Ball not achieving stable spin; weak batteries. Ensure the device is on a level surface. Check and replace batteries if necessary. Allow sufficient time for the ball to stabilize.
Inconsistent or inaccurate marking. Ball not stable; marker not properly inserted; weak batteries; old golf ball. Ensure the LED is solid green before marking. Gently insert the marker. Replace batteries. Use new golf balls for best results.
Device does not turn on. Dead or incorrectly installed batteries. Check battery polarity and ensure they are fresh. Replace batteries if needed.

Specifications

  • Model Number: HXQ006
  • Brand: PGM
  • Power Source: 2 x AA Batteries (not included)
  • Function: Golf ball center of gravity finder and alignment marker
  • Package Dimensions (Approx.): 21 cm (L) x 14 cm (W) x 13 cm (H)
  • Package Weight (Approx.): 0.247 kg
  • Origin: Mainland China

User Tips

  • For optimal results, it is recommended to use new golf balls with the CHECK-GO PRO.
  • Always ensure the device is placed on a perfectly flat and stable surface during operation to prevent wobbling and ensure accurate center of gravity detection.
  • Allow the ball to spin for the full 15 seconds until the LED glows solid green. This ensures the ball is on a steady axis for precise marking.
  • If the ball appears to wobble or shake excessively, release the power button and press it again to restart the rotation process until it stabilizes.
  • Check the battery level regularly. Weak batteries can lead to inconsistent spinning and inaccurate markings.

Frequently Asked Questions (FAQ)

Q: Why is finding the center of gravity important for a golf ball?
A: Some golf balls may have an uneven weight distribution. When such a ball is hit, its trajectory can deviate mid-flight. The CHECK-GO PRO helps identify the most evenly distributed weight line, ensuring a more stable and accurate flight path.
Q: How long does it take for the device to find the center of gravity?
A: The device typically takes about 15 seconds for the golf ball to achieve a stable spin and for the LED indicator to glow a solid green, signaling that the center of gravity has been found.
Q: What should I do if the golf ball wobbles during operation?
A: If the golf ball shakes or wobbles, release the power button and press it again. Continue this until the ball spins smoothly and stably, and the green LED light remains solid.
Q: Can I use any marker pen with the device?
A: It is recommended to use the provided marker pen or a similar fine-tip, non-permanent marker designed for golf balls to ensure optimal marking and avoid damage to the device or ball.

Warranty and Support

The manufacturer warrants to the original user that this product shall be free from all defects in material or workmanship for 90 days from the date of original purchase. This warranty does not cover products subjected to abuse, misuse, neglect, negligence, or accident, nor does it cover batteries supplied with the product. Defects caused by tampering, unauthorized alterations, or repairs are also not covered.

In the event of a covered defect, the manufacturer may elect to replace the entire unit with the same or a similar model at no extra cost, rather than repair it.

If you encounter a defect covered by this warranty, please contact customer support with your purchase receipt and a description of the problem. Many issues can be resolved by checking the batteries first.

For further assistance or inquiries, please feel free to contact our customer service representatives.

A digital version of this user manual is available in PDF format. You can access it via the following link: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.