MOES WM-108-M

Contents

MOES Smart Curtain Switch Module User Manual

Model: WM-108-M (WiFi) / ZM-108-M (ZigBee)

Brand: MOES

1. Introduction

The MOES Smart Curtain Switch Module is designed to transform traditional curtain switches into smart, app-controlled devices. It supports both WiFi and ZigBee protocols, allowing seamless integration with smart home ecosystems like Tuya, Smart Life, Google Assistant, and Amazon Alexa. This module enables remote control, scheduling, and voice control of your curtains, enhancing convenience and smart living.

MOES Smart Curtain Switch Module with WiFi and Zigbee logos, showing models ZM-108-M and WM-108-M and their wiring terminals.

Image 1: MOES Smart Curtain Switch Module (WiFi and ZigBee versions)

2. Safety Information

  • All wiring should be performed by a qualified electrician or authorized professional.
  • Always turn off the power at the circuit breaker before performing any electrical work.
  • Do not attempt to repair or modify the product yourself. Unauthorized modifications may reduce performance and void the warranty.
  • Do not expose the device to moisture, extreme temperatures, or direct sunlight.
  • Ensure the input voltage and maximum current ratings are respected to prevent damage.

3. Package Contents

  • 1 x MOES Smart Curtain Switch Module (WM-108-M or ZM-108-M)

Note: Specific package contents may vary. If a ZigBee module is purchased, a ZigBee gateway is required and sold separately.

4. Technical Specifications

Feature Specification
Model WM-108-M (WiFi) / ZM-108-M (ZigBee)
Input Voltage 90-250V AC, 50/60Hz
Maximum Current Total 2.5A
Wireless Protocol WiFi 2.4GHz IEEE 802.11 b/g/n or ZigBee 3.0
Operating Temperature Not specified (typical range for smart devices is -10°C to 40°C)
Dimensions 51.5 x 71.8 mm (approximate, based on manual diagram)
Origin Mainland China
Certification CE

5. Setup and Installation

5.1 Wiring Instructions

Before starting, ensure the main power supply is turned off at the circuit breaker. Follow the wiring diagram carefully.

Detailed wiring diagram for MOES Smart Curtain Switch Module showing connections for Live, Neutral, Curtain Motor, and physical switch.

Image 2: Wiring Diagram (also shown on the module itself)

  1. Turn off Power: Disconnect power to the circuit at the main breaker.
  2. Connect Live (L) and Neutral (N): Connect the incoming Live and Neutral wires to the 'L' and 'N' terminals on the module, respectively.
  3. Connect to Curtain Motor: Connect the curtain motor's control wires to the 'L1' (Output 1) and 'L2' (Output 2) terminals on the module.
  4. Connect to Physical Switch (Optional): If using a traditional rocker or reset switch, connect its wires to the 'S1' and 'S2' terminals on the module. The 'L' terminal on the module also needs to be connected to the 'L' terminal of the physical switch.
  5. Secure Connections: Ensure all wire connections are tight and secure.

5.2 Physical Installation

The compact design of the module allows it to be installed behind existing wall switches or within standard electrical boxes.

Diagram showing the compact MOES module fitting into various standard electrical wall boxes (80x80mm, 70x76mm, 66x102mm).

Image 3: Module fitting into electrical boxes

Illustration of the MOES module installed behind a traditional wall-mounted curtain switch, transforming it into a smart switch.

Image 4: Module installed behind a traditional switch

  1. After wiring, carefully place the module into the electrical box or behind the wall switch.
  2. Ensure there is enough space and that no wires are pinched.
  3. Re-install the wall switch and cover plate.
  4. Restore power at the circuit breaker.

6. Operating Instructions

6.1 App Download and Pairing

To control your smart curtain module, download the MOES App (or Tuya/Smart Life App) from your smartphone's app store.

  • Scan the QR code provided in the original manual or search for "MOES App" (or "Tuya Smart" / "Smart Life") in the App Store or Google Play.
  • Register or log in to your account.
  • Ensure your smartphone is close to the module and has a strong Wi-Fi signal (at least 50%).

Pairing Methods:

  1. Method One (Recommended for new users): Follow the in-app instructions to scan for new devices.
  2. Method Two (Manual Pairing): Ensure your phone's Wi-Fi is enabled. The app will guide you through the process.
Screenshot of the MOES app interface for remote control of curtains, showing open/close buttons and a timer function.

Image 5: App Remote Control

Note: For ZigBee modules, a ZigBee gateway must be set up and connected to the app before pairing the curtain module.

6.2 Remote Control via App

Once paired, you can control your curtains from anywhere using the app. The app interface typically includes buttons to open, close, or pause the curtains.

6.3 Timing Function

Set schedules for your curtains to open or close automatically at specific times. This feature allows for automated light control and enhanced home security.

Illustration of the timing function, showing curtains closing at 7:00 PM and opening at 7:00 AM automatically.

Image 6: Timing Function

6.4 Voice Control

Integrate the module with voice assistants like Amazon Alexa or Google Home for hands-free control. Follow the instructions in your smart assistant's app to link your MOES/Tuya/Smart Life account.

6.5 Full Open/Close Functionality

The MOES module is designed to ensure curtains can be fully opened or closed, providing complete light control and privacy.

Comparison showing MOES module ensuring curtains close completely, unlike other systems that may leave a gap.

Image 7: Ensuring full curtain closure

7. Resetting and Re-pairing

If you need to reset the module or re-pair it with the app, follow these steps:

  • For Modules with a Reset Button: Long press the reset button for 5 seconds until the indicator light flashes rapidly.
  • For Modules Connected to a Rocker Light Switch: Quickly press the physical switch button 10 times (on/off cycles) until the indicator light on the module flashes rapidly.
  • For Modules Connected to a Reset Switch: Quickly press the physical switch button 10 times (on/off cycles) until the indicator light on the module flashes rapidly.

Once the indicator light is flashing, the module is in pairing mode. Open the MOES/Tuya/Smart Life app and follow the instructions to add a new device.

8. Troubleshooting

  • Device not pairing:
    • Ensure your Wi-Fi network is 2.4GHz. 5GHz networks are not supported.
    • Verify your phone is connected to the same 2.4GHz Wi-Fi network.
    • Make sure the module is in pairing mode (indicator light flashing rapidly).
    • Check Wi-Fi signal strength; move your phone closer to the module and router.
    • For ZigBee modules, confirm the ZigBee gateway is powered on and connected to the network.
  • Curtains not responding:
    • Check if the module has power (indicator light should be on or flashing).
    • Verify wiring connections to the curtain motor and power supply.
    • Ensure the module is still connected to the app. If not, try re-pairing.
    • Test the physical switch (if connected) to see if the motor responds.
  • Voice control not working:
    • Confirm the MOES/Tuya/Smart Life account is correctly linked in your Alexa or Google Home app.
    • Check the device name in the voice assistant app; ensure it's easily recognizable.
    • Verify internet connectivity for both the module and your voice assistant device.
  • Intermittent connectivity:
    • Poor Wi-Fi signal strength can cause this. Consider a Wi-Fi extender or repositioning your router.
    • Ensure there are no physical obstructions or interference sources near the module.

9. User Tips

  • Labeling: After installation, consider labeling the physical switch or the circuit breaker for easy identification.
  • Routine Automation: Utilize the timing function to create routines for daily curtain opening and closing, which can help regulate indoor temperature and save energy.
  • Group Control: If you have multiple curtain modules, group them in the app for simultaneous control, e.g., 'Living Room Curtains'.
  • Firmware Updates: Regularly check the app for firmware updates to ensure optimal performance and security.

10. Warranty and Support

10.1 Warranty Information

MOES products are covered by a 24-month warranty from the date of purchase. This warranty covers product performance under normal use. It does not cover damages resulting from:

  • Improper installation or wiring.
  • Misuse, abuse, or negligence.
  • Unauthorized repairs or modifications.
  • Accidental damage or natural disasters.

To claim warranty service, please contact your local dealer or the guarantor with proof of purchase.

10.2 Manufacturer Information

Manufacturer: WENZHOU NOVA NEW ENERGY CO.LTD

Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China

Website: www.moes.net

10.3 Additional Resources

A detailed user manual in PDF format is available for download. You can access it via the following link: MOES Smart Curtain Switch Module User Manual (PDF)

11. Compliance and Recycling

11.1 Declaration of Conformity

This device complies with the essential requirements and other relevant provisions of European Directives, including 2014/53/EU (RED), 2014/35/EU (LVD), 2014/30/EU (EMC), and 2011/65/EU (RoHS).

11.2 Recycling Information (WEEE)

All products marked with the symbol for separate collection of electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from municipal waste. To prevent potential harm to the environment and human health from uncontrolled waste disposal, please recycle this product responsibly at designated collection points. Contact your local authority for information regarding available collection schemes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.