NEWBOLER Wide-Mouth Foldable Soft Water Bottle

1. Product Overview

The NEWBOLER Wide-Mouth Foldable Soft Water Bottle is a versatile hydration solution designed for outdoor enthusiasts. Available in multiple capacities, it features a durable, food-grade PEVA construction, a leak-proof bite valve, and an easy-to-clean design, making it ideal for cycling, running, hiking, and camping.

Figure 1: NEWBOLER 1.5L hydration bladder with hose, black color.

2. Setup and Assembly

2.1 Initial Cleaning

1. Before first use, thoroughly clean the bladder, hose, and bite valve assembly.
2. Use mild detergent and warm water.
3. Rinse all components thoroughly with clean water to remove any soap residue.
4. Ensure all parts are completely dry before assembly or storage.

2.2 Hose and Valve Assembly

1. Attach the hose to the bladder's outlet port by screwing it in clockwise until secure. Ensure the sealing ring is properly seated to prevent leaks.
2. Connect the bite valve to the other end of the hose.

Figure 2: Quick connection and disassembly of the hose for easy cleaning.

Figure 3: Close-up of the leak-proof connection interface and water pipe connecting sealing ring.

2.3 Filling the Bladder

1. Open the wide-mouth top of the bladder by sliding the sealing clamp off.
2. Fill the bladder with water. It is recommended to use water only; other liquids are not recommended.
3. You can easily add ice cubes through the wide opening.
4. Once filled, slide the sealing clamp back onto the top opening to ensure a secure, leak-proof seal.

Figure 4: Green hydration bladder showing ease of filling with water and ice, and ease of cleaning.

3. Operating Instructions

3.1 Valve Usage

1. To Start Water Flow: Gently bite the tip of the valve with your front teeth.
2. To Stop Water Flow: Decrease bite pressure on the valve.
3. Optimal Use: For best results, DO NOT bite hard or chew excessively on the valve.
4. When Not in Use: Always replace the dust cap on the bite valve to keep it clean and prevent accidental leaks.

Figure 5: Close-up of the bite valve, illustrating push-down to lock and push-up to unlock mechanism for leak-proof operation.

3.2 Leak-Proof Lock

The bite valve features a lock mechanism for added security:

• To Lock: Push the valve down. This prevents any water flow, ideal for transport.
• To Unlock: Push the valve up. This allows water to flow when the valve is bitten.

3.3 Usage Scenarios

This hydration bladder is suitable for a variety of outdoor activities:

• Cross-country running
• Outdoor cycling
• Hiking and trekking
• Camping

Figure 6: Hydration bladder in various outdoor activity settings: running, cycling, hiking, camping.

4. Maintenance and Care

4.1 Cleaning Instructions

1. After each use, clean the bladder, hose, and bite valve assembly with mild detergent and thoroughly rinse with water.
2. For best results, use a bladder cleaning kit (brush for hose, larger brush for bladder interior).
3. Ensure all components are completely dry both inside and out before storing.

4.2 Drying and Storage

1. To dry the bladder, store it in an open position to allow air circulation.
2. Utilize the convenient hanging hole under the water bag to hang it upside down for thorough drying.
3. Avoid contact with harsh chemicals and direct UV light, as these elements can damage the bladder material.
4. Keep the bladder away from sharp objects to prevent punctures.

Figure 7: Image showing the hanging hole for convenient drying of the water bag.

5. Troubleshooting

5.1 Leaks

• Check Connections: Ensure the hose is securely screwed into the bladder and the bite valve is firmly attached to the hose.
• Sealing Ring: Verify that the small sealing ring at the bladder-hose connection is properly seated and not damaged.
• Top Seal: Make sure the sealing clamp at the top of the bladder is fully engaged and correctly positioned.

5.2 No Water Flow

• Valve Lock: Check if the bite valve is in the unlocked (up) position.
• Bite Pressure: Ensure you are biting the valve with enough pressure to open it.
• Hose Kink: Check the hose for any kinks or obstructions.
• Bladder Empty: Confirm there is water in the bladder.

5.3 Unpleasant Taste

• Thorough Rinsing: Ensure all components are thoroughly rinsed after cleaning to remove any detergent residue.
• Air Dry: Allow all parts to air dry completely to prevent mildew or stale odors.

6. Specifications

6.1 Dimensions

Figure 8: Product size chart for 3L, 2L, and 1.5L bladders, including hose length.

• 3L Capacity: 19.5 cm (7.68 in) Width x 42.5 cm (16.73 in) Length
• 2L Capacity: 17.5 cm (6.9 in) Width x 39 cm (15.35 in) Length
• 1.5L Capacity: 17.5 cm (6.9 in) Width x 36.5 cm (14.37 in) Length

7. User Tips

• First Use: Always rinse the bladder and all components thoroughly with warm water and a small amount of baking soda or lemon juice before the very first use to eliminate any manufacturing odors.
• Avoid Sugary Drinks: While the bladder is easy to clean, avoiding sugary drinks can prevent residue buildup and potential mold growth, extending the life of your bladder.
• Freezer Storage: For long-term storage between uses, ensure the bladder is completely dry, then store it in the freezer. This helps prevent mold and bacteria from growing.

8. Important Safety Information

California Proposition 65 Warning:

This product contains Urethane (Ethyl carbamate), a chemical known to the State of California to cause developmental toxicity and cancer. For more information go to www.P65Warnings.ca.gov.

9. Warranty and Support

For any questions, concerns, or warranty claims regarding your NEWBOLER Wide-Mouth Foldable Soft Water Bottle, please contact the seller directly through your purchase platform. Please refer to the official user manual PDF for additional detailed information: View User Manual (PDF).