KINGSOFE H11 LED Headlight Bulbs

Contents

H11 LED Headlight Bulbs User Manual

Brand: KINGSOFE

Model: H11 LED Headlight Bulbs

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your KINGSOFE H11 LED Headlight Bulbs. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Product Specifications

The KINGSOFE H11 LED Headlight Bulbs are designed for automotive headlamp applications, offering enhanced brightness and efficiency. Key specifications are listed below:

Feature Specification
Item Type Other (Headlamp)
Material Aviation Aluminum
Chip Type 3570 CSP Chips (TOP-TIER CSP)
Fit Plug H11
Wattage 200W
Luminous Flux 50000LM (High Lumen)
Voltage DC 12-24V
Color Temperature 6000K-6500K (Super White)
Beam Angle 360 Degree
Lifespan Above 50,000 hours
Waterproof Rating IP68
Operating Temperature -40℃ ~ +80℃
Cooling System Internal Fan Cooling (16,000 RPM ultra speed cooling fan), Copper Tube, Multi-layer heat sink
CANBUS Compatibility CANBUS No Error (Built-in Chip)
Certification E-Mark, CE, FCC, RoHS
Dimensions (approx.) Width: 1.4cm (0.551in), Length: 6cm (2.36in), Connector Height: 1.9cm (0.748in), Connector Length: 3.5cm (1.38in)
H11 LED Headlight Bulb Size Display
Figure 1: H11 LED Headlight Bulb Size Display. The bulb measures approximately 1.4cm in width, 6cm in length, with a connector height of 1.9cm and length of 3.5cm.
Efficient Cooling System Diagram
Figure 2: Efficient Cooling System Diagram. Illustrates the copper tube for heat conduction, quiet bearing fan for noise reduction and heat dissipation, TOP-TIER CSP LED chips for luminous efficiency, and aviation-grade aluminum alloy housing for rigidity and heat dissipation.
Long Lifespan and Internal Components
Figure 3: Long Lifespan and Internal Components. Shows the full aviation aluminum alloy body, high quality alloy base, multi-layer heat sink, and 16,000 RPM ultra-speed cooling fan, contributing to a lifespan of over 50,000 hours.

3. Package Contents

Your package should contain the following items:

  • 2 x H11 LED Car Headlight Bulbs
Two H11 LED Headlight Bulbs
Figure 4: Two H11 LED Headlight Bulbs as included in the package.

4. Safety Information and FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

Always ensure your vehicle's electrical system is off before handling any electrical components. Wear appropriate safety gear, such as gloves and eye protection, during installation.

5. Installation Guide

The H11 LED Headlight Bulbs are designed for ultra-easy, 3-minute DIY installation. No external driver or wiring is typically needed due to the built-in CANBUS chip.

Pre-Installation Checks:

  • Verify the size of your vehicle's existing bulbs to ensure compatibility with H11.
  • Confirm that your headlight housing has sufficient space for the new LED bulbs.
  • Ensure the vehicle's ignition is off and the battery is disconnected before starting.

3-Minute Installation Steps:

  1. Remove Old Bulb: Carefully remove the existing halogen headlight bulb from its socket.
  2. Insert LED Bulb: Insert the new H11 LED headlight bulb into the headlight assembly. Ensure it is seated correctly.
  3. Lock in Place: Rotate and lock the LED bulb into position. Connect the electrical connector.
3-Minute Installation Steps for H11 LED Headlight
Figure 5: Visual guide for the 3-minute installation process. Step 1 shows removing the old bulb, Step 2 inserting the new LED bulb, and Step 3 locking it into place.

After installation, test the headlights to ensure they function correctly. If you encounter any issues, refer to the Troubleshooting section.

6. Operation

Once installed, your H11 LED Headlight Bulbs operate like standard vehicle headlights. They provide a 6000K-6500K super white light with a 1:1 beam restoration design, ensuring a perfect beam pattern without dark areas or dazzling oncoming vehicles.

  • Turn on your vehicle's headlights as usual.
  • The LED bulbs will provide immediate, full brightness.
  • The 360-degree lighting design ensures broad illumination.
  • The CANBUS-ready feature prevents dashboard errors and flickering in most compatible vehicles.
1:1 Same Beam Restoration Design
Figure 6: Comparison illustrating the 1:1 Same Beam Restoration Design of the LED bulb versus a halogen lamp, showing a perfect beam pattern without dark areas or shadows.
Automotive-Grade Customized LED Chips
Figure 7: Depiction of Automotive-Grade Customized LED Chips, highlighting 500% brighter illumination and 100% higher luminous efficiency compared to halogen lamps, with a perfect beam pattern and no dark areas.

7. Care and Maintenance

These LED headlight bulbs are designed for durability and a long lifespan of over 50,000 hours with minimal maintenance. Follow these guidelines to ensure optimal performance:

  • Cleaning: If the outer lens of your headlight assembly becomes dirty, clean it with a soft cloth and appropriate automotive cleaner. Avoid harsh chemicals that could damage the lens or bulb.
  • Inspection: Periodically check the headlight assembly for any signs of moisture ingress or damage.
  • Operating Environment: The IP68 waterproof rating and wide operating temperature range (-40℃ to +80℃) ensure reliability in various weather conditions (rainy, foggy, sunny, dusty).
IP68 Waterproof Rating and Operating Temperature
Figure 8: Illustrates the IP68 waterproof rating and operating temperature range of -40°C to +80°C, demonstrating the bulb's resilience in rainy, foggy, sunny, and dusty conditions.

8. Troubleshooting

If you encounter any issues with your H11 LED Headlight Bulbs, refer to the following common problems and solutions:

Problem Possible Cause Solution
Bulbs not turning on Loose connection, incorrect polarity, blown fuse, faulty bulb. Check all connections are secure. Ensure the plug is inserted correctly (some vehicles may require reversing the plug). Check vehicle's fuse box. Test with another bulb if available.
Dashboard error message or flickering (CANBUS issue) While designed with CANBUS, some sensitive vehicle systems may still detect a difference in wattage. Ensure the bulb is fully seated and connected. If the issue persists, an additional external CANBUS decoder may be required for highly sensitive vehicle systems.
Uneven or poor light pattern Bulb not seated correctly in the housing, incorrect bulb type for the reflector. Re-seat the bulb, ensuring it is firmly and correctly positioned. Verify that H11 is the correct bulb type for your vehicle's headlight assembly.
Excessive heat from the bulb Restricted airflow around the cooling fan. Ensure there is adequate space around the bulb's cooling fan within the headlight housing. Do not obstruct the fan.

9. User Tips

  • Check Plug Orientation: During installation, if the bulb does not fit easily or function, try reversing the plug. Some vehicle connectors may have a specific orientation, and a user reported that the plug was inserted upside down, preventing proper fit.
  • Verify Fitment: Always double-check the bulb size and ensure your headlight housing has enough space before purchasing and installing.

10. Frequently Asked Questions (FAQ)

Q: Are these bulbs truly plug-and-play?
A: Yes, these H11 LED bulbs are designed for a 1:1 replacement of halogen bulbs, featuring a built-in CANBUS chip for direct plug-and-play installation in most vehicles without additional wiring or decoders.
Q: Will these bulbs cause error messages on my dashboard?
A: The bulbs are equipped with CANBUS technology to prevent error messages and flickering in most modern vehicles. However, some highly sensitive European vehicles may still require an additional CANBUS decoder.
Q: What is the expected lifespan of these LED bulbs?
A: These bulbs are rated for a lifespan of over 50,000 hours, significantly longer than traditional halogen bulbs, thanks to their efficient cooling system and high-quality CSP chips.
Q: Can I use these bulbs in all weather conditions?
A: Yes, with an IP68 waterproof rating and an operating temperature range of -40℃ to +80℃, these bulbs are designed to perform reliably in various extreme weather conditions, including rain, fog, and dust.

11. Warranty and Support

These KINGSOFE H11 LED Headlight Bulbs come with a 2-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For warranty claims or technical support, please contact the seller or manufacturer with your purchase details. Please note that the warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

A user manual in PDF format is available for download, which includes detailed product specifications and FCC compliance information. You can reference it at: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.