1. Product Overview
The IKSLED DC 1020 Radar-Sensing Switch is designed to automatically control connected loads, such as LED lights or small appliances, by detecting human movement signals. This versatile switch supports multiple DC input voltages (3.7V, 5V, 12V, 24V) and offers selectable sensing distances. It features a 180° sensing angle and a fixed delay-off time of 30 seconds. The sensor can effectively penetrate non-metallic materials like wooden boards, plastics, and acrylic panels, making it suitable for various installations including cabinets, corridors, staircases, and similar areas. It cannot penetrate glass, metal, or cement walls.
2. Specifications
| Parameter | Details |
|---|---|
| Product Name | DC 1020 Radar-Sensing Switch |
| Model Number | DC1020 Radar switch |
| Brand Name | IKSLED |
| Switch Type | Sensor Switch |
| Sensing Distance | Version A: 1-1.5 m / Version B: 3-4 m |
| Penetrable Materials | Wooden board, plastic, acrylic |
| Non-Penetrable Materials | Glass, metal, cement walls |
| Delayed Turn-off Time | 30 seconds |
| Voltage | 3.7V / 5V / 12V / 24V DC |
| Current | Max. 3A |
| Sensing Angle | 180° |
| Dimensions | Length: 43 cm / Width: 22 cm / Height: 11 cm |
| Material | Plastic |
| Certification | SAA, RoHS, LVD, EMC, CE, CCC |
| Is Smart Device | No |
| Warranty | 1 Year |
| Origin | Mainland China |
| Applicable Scenario | Garage basement corridor cabinets, corridors, staircases, and similar installations. |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
3. Setup
3.1 Wiring Instructions
The DC 1020 Radar-Sensing Switch has four wires for connection:
| Wire Color / Label | Function | Connection Target | Notes |
|---|---|---|---|
| Red (V+) | Power Positive | DC power supply positive terminal | Connect to power source "+" or load "+" |
| Black (V-) | Power Negative | DC power supply negative terminal | Connect to power source "-" or load "-" |
| White (LED+) | Load Positive | Load positive terminal (e.g., LED +) | Connect to the controlled device "+" |
| Red (LED-) | Load Negative | Load negative terminal (e.g., LED -) | Connect to the controlled device "-" |
Example (for controlling an LED):
- Power: Connect V+ (red) to power supply +, V- (black) to power supply -.
- Load: Connect LED+ (white) to LED +, LED- (red) to LED -.
3.2 Mounting Position
- Install the sensor behind penetrable materials such as wooden boards, plastic, or acrylic.
- Avoid mounting the sensor directly in front of non-penetrable surfaces like glass, metal, or cement walls, as these will block detection.
- Recommended mounting height is 1-2 meters to ensure optimal 180° coverage.
3.3 Voltage Matching
- Use only the specified DC voltage (3.7V, 5V, 12V, or 24V).
- Mismatched voltage may damage the unit and void the warranty.
3.4 Load Limitation
- Do not exceed a 3A load current.
- For higher loads, use an appropriate relay or external driver to prevent damage to the switch.
4. Operating Instructions
4.1 Function Description
- ON Trigger: The load automatically turns ON when human movement is detected within the sensing range.
- Continuous ON: The load remains ON as long as a person stays within the detection range.
- Delay OFF: The load turns OFF 30 seconds after the person leaves the detection area.
4.2 Range Adjustment
- Choose between Version A (1-1.5 m sensing distance) or Version B (3-4 m sensing distance) based on your application needs.
- The effective range can also be adjusted by changing the physical mounting position of the sensor.
5. Maintenance
5.1 Environmental Interference
- Keep the sensor away from strong electromagnetic interference sources, such as large motors or transformers, to prevent false triggers and ensure reliable operation.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No response to motion | 1. Wrong voltage | Check and use correct DC voltage |
| 2. Incorrect wiring | Recheck V+/V- and LED+/LED- connections | |
| 3. Blocked by non-penetrable material | Relocate sensor behind suitable material | |
| Does not turn OFF after leaving | 1. Hardware fault | Contact manufacturer for repair/replacement |
| 2. Person still in range | Verify person has left detection zone | |
| Unstable load operation | 1. Voltage fluctuation | Use stable power supply or add regulator |
| 2. Load current > 3A | Reduce load or add driver module |
7. Package Contents
- DC 1020 Radar-Sensing Switch x 1
- User Manual x 1 (A digital version of this manual is available at this link.)
8. User Tips
- Easy Installation: Users have noted the switch is easy to install and adjust. Ensure all wiring is correct according to the instructions.
- Continuous Lighting: For continuous illumination, ensure there is continuous movement within the sensing area. The light will turn off 30 seconds after movement ceases.
- Power Supply Stability: If experiencing unstable operation, verify your power supply is stable or consider adding a voltage regulator.
9. Frequently Asked Questions (FAQ)
No specific FAQ content is available at this time. Please refer to the troubleshooting section or contact customer support for further assistance.
10. Warranty & Support
This product comes with a 1-year warranty. For technical support, warranty claims, or any other inquiries, please contact the seller or manufacturer directly. Ensure you retain your proof of purchase for warranty purposes.