Introduction
Thank you for purchasing the XIAOTREE 2 Pack Rechargeable Electric Hand Warmers. This device is designed to provide warmth and comfort in cold conditions. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your product.
Product Overview
The XIAOTREE Electric Hand Warmer features a compact, portable design made from durable ABS material. It offers multiple heating modes and a magnetic split design for versatile use.
Setup and Initial Use
Important Note on Initial Charge:
To ensure transportation safety, the product battery is shipped completely discharged. Upon receiving your hand warmers, please fully charge them before first use. This is not indicative of product damage or malfunction.
Charging Procedure:
- Charging Preparation: Take out the hand warmer and the included charging cable. Insert one end of the charging cable into the charging port located on the bottom of the hand warmer. Connect the other end to a USB charging adapter (e.g., a mobile phone charger) or a computer USB port.
- Charging Observation: The indicator light will illuminate and flash during charging. Once the battery is fully charged, the indicator light will stop flashing. Please unplug the charging cable immediately to prevent overcharging.
Operating Instructions
Turning On and Adjusting Temperature:
- After fully charging, press and hold the power button on the side of the device to switch between different hand warmer modes.
- Multiple heating modes are available. Refer to the actual product markings for specific mode indicators.
- To turn off the hand warmer function, press and hold the power button again.
Hand Warming Function:
- Once the desired setting is activated, wait 3-5 minutes for the device to reach the set temperature.
- The hand warmer can be held in your hand or placed in a pocket or glove to keep your hands warm.
- The hand warmers feature a magnetic design, allowing them to be used together or separated for individual use.
Maintenance
Charging and Storage:
- If the battery is low (indicator light flashing) after each use, please charge it promptly.
- If the hand warmer will not be used for a long period, it is recommended to charge it every 3 months to prevent battery depletion and damage.
Cleaning Method:
- When cleaning the surface of the hand warmer, please wipe it with a dry or slightly damp soft cloth.
- Do not rinse or soak the device with water to avoid moisture entering the interior and causing a short circuit.
Troubleshooting
- Device not turning on: Ensure the device is fully charged. Refer to the 'Setup and Initial Use' section for charging instructions.
- Device not heating: Check if the device is turned on correctly by pressing and holding the power button. Allow 3-5 minutes for the device to reach the set temperature.
- Charging issues: Ensure you are using the provided charging cable and a compatible USB charging adapter. Avoid using non-matching charging heads or cables, as this may damage the product.
- Indicator light behavior: Flashing light typically indicates charging or low battery. A solid light usually means it's fully charged or operating. Refer to specific product markings for detailed indicator light meanings.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Portable Outdoor Hand Warmer |
| Brand Name | XIAOTREE |
| Models | HM2005, HM1945, HM1947, HM1949, HM2007 |
| Material | ABS |
| Voltage | 3.7V & Under (DC Power Supply) |
| Capacity | 3000mAh per unit (6000mAh total for a pair) |
| Rechargeable | Yes |
| Gear Settings | 3 (High, Medium, Low) |
| Dimensions (approx.) | Length: 9.7cm (3.82in), Width: 5cm (1.97in), Thickness: 0.7in |
| Weight (approx.) | 0.39 lbs per unit |
| Origin | Mainland China |
Safety Information and Usage Restrictions
WARNING: Please be aware of potential fire risks and strictly follow the instruction manual for charging and storage.
- Do not use, charge, or store the hand warmer in high-temperature environments (such as direct sunlight, near fire sources, or near radiators). The ambient temperature should be controlled between -10°C and 45°C.
- Do not disassemble, squeeze, puncture, or impact the product to avoid damaging the battery and heating element, which could cause safety hazards.
- Do not use non-matching charging heads or cables. Using incorrect charging voltage/current may damage the product or cause a fire.
- Do not allow prolonged contact with skin, especially while sleeping. When using the high-temperature setting, it is recommended to take a 1-hour break to prevent low-temperature burns.
- Minors, pregnant women, people with sensitive skin, and people with mobility impairments must use this product under adult supervision.
- Do not use for heating food, liquids, or other purposes other than hand warming.
For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with applicable legal requirements.
User Tips
- Always fully charge the hand warmers before their first use to ensure optimal performance and battery longevity.
- For extended storage, remember to charge the hand warmers every three months to prevent battery degradation.
- When using the highest temperature setting, take regular breaks (e.g., every hour) to avoid potential low-temperature burns.
- Keep the hand warmers dry and clean. Wipe with a soft, dry, or slightly damp cloth. Avoid water immersion.
Warranty and Support
For warranty information, technical support, or any product-related inquiries, please refer to the documentation included with your purchase or contact the seller directly. A detailed user manual is also available in PDF format for download: User Manual (PDF).