1. Introduction
This manual provides essential information for the safe and effective use of your HTBCCHB Universal Handlebar Bar Pad. This product is designed to provide auxiliary cushioning protection for off-road cycling. Please read all instructions carefully before installation and use.
2. Safety & Warnings
- Strictly Prohibit Use Beyond Specifications: This product is only suitable for 22mm (1-1/8") handlebar cross tubes. Forcefully installing it on handlebars of other sizes will cause the protective pad to fall off and lose its protective function.
- Firm Fixing is Essential: Use Velcro straps to securely wrap the protective pad around the handlebar crossbar. Check again before riding to avoid detachment during high-speed driving.
- Avoid High Temperature and Chemical Corrosion: The protective pad should be kept away from high-temperature components such as exhaust pipes and engines. Avoid contact with chemicals such as gasoline and engine oil to prevent plastic shell deformation and sponge aging.
- Regular Inspection for Damage: Before each ride, check the protective pad for cracks, damage, or exposed sponge. If there are any abnormalities, replace it immediately to avoid losing its cushioning and protective function.
- Children's Cycling Requires Supervision: This product is designed for adult off-road use, and children need adult supervision when using it to avoid secondary injury caused by the protective pad slipping or falling off.
- Non-Professional Protective Equipment: This product is only for auxiliary cushioning protection and cannot replace professional off-road chest protectors, helmets, and other safety equipment. When riding, it is necessary to wear a full set of professional protective equipment.
3. Package Contents
- 1 x Handlebar Bar Pad (Chest Pad)
Note: The product is a non-original modified part.
4. Specifications
| Feature | Detail |
|---|---|
| Product Type | Handlebar Pad |
| Material | Cotton |
| Fitment | Universal for 22mm (1-1/8") Handlebar Cross Tubes (Motorcycle, Dirt Bike, Pit Bike) |
| Dimensions (Approx.) | Length: 200mm, Width: 80mm, Inner Width: 50mm, Base Length: 130mm |
| Weight (Approx.) | 0.14 kg |
5. Setup and Installation
Follow these steps to properly install your handlebar bar pad:
- Clean Handlebars: Remove any sediment, dirt, or oil from the surface of the handlebar cross tube to ensure a clean and smooth contact surface for optimal adhesion and stability.
- Insert Protective Pad: Place the handlebar pad in the middle of the handlebar horizontal tube. Ensure it is aligned with the center position of the handlebar.
- Fixed Straps: Use the integrated Velcro straps to securely wrap the protective pad around the handlebar crossbar. Ensure the pad is not loose or displaced. The straps should be tightened firmly.
- Check Fixation: Gently shake the protective pad by hand to confirm that it is firmly fixed and does not shake or risk falling off during use.
6. Operation
The HTBCCHB Universal Handlebar Bar Pad functions as a passive safety accessory. Once securely installed on your motorcycle, dirt bike, or pit bike's handlebar cross tube, it provides a cushioned barrier. This barrier is designed to reduce the impact to the rider's chest area in the event of contact with the handlebars, enhancing safety during off-road riding.
7. Maintenance
- Cleaning: Wipe the pad with a damp cloth to remove dirt and dust. Avoid using harsh chemicals that may degrade the material.
- Inspection: Regularly inspect the pad for any signs of wear, tear, cracks, or exposed sponge. Check the Velcro straps for integrity and ensure they still provide a firm hold.
- Storage: Store the pad in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Replacement: If any damage is found during inspection, replace the handlebar pad immediately to maintain its protective function.
8. Troubleshooting
- Problem: Pad does not fit or is loose.
- Solution: Ensure your handlebar cross tube diameter is 22mm (1-1/8"). This product is specifically designed for this size. If the diameter is different, the pad may not fit securely. Re-check the tightness of the Velcro straps.
- Problem: Product received differs from the image.
- Solution: While the core function and design are consistent, minor aesthetic variations (e.g., specific branding on the pad itself) may occur. The brand of this product is HTBCCHB. If the functional aspect or fitment is incorrect, please refer to the warranty and support section.
9. User Tips
- The foam in the pad is generally firm, providing good impact absorption.
- The Velcro stitching is designed for durability and a secure fit. Ensure it is clean and free of debris for maximum grip.
- Some users have noted that the plastic covering the logo might be thin; handle with care during installation and cleaning.
- The pad's aesthetic can significantly enhance the look of your bike.
10. Frequently Asked Questions (FAQ)
- Q: What is the diameter of the tubular notch where the handlebar is fixed?
- A: The handlebar pad is designed to fit handlebar cross tubes with a diameter of 22mm (1-1/8").
- Q: Does the product have a specific brand logo?
- A: The brand of this product is HTBCCHB. While some images or user reviews might mention other brand names, the product you receive will be branded HTBCCHB.
11. Warranty & Support
For detailed product guides and documents, including a user manual in PDF format, please refer to the official product page or contact the manufacturer directly. The manufacturer's contact information is provided below:
- Manufacturer: Yongkang Hongxu Trading Co., Ltd.
- Address: Changcheng Village, Yongkang Economic Development Zone, Jinhua City, Zhejiang Province Room 302, 3rd Floor, No. 66 Jinbi Road
- Email: 841996743@qq.com
- Phone: 86-13018090962
- EU Authorized Representative: MJCM SARL
- EU Representative Address: 78 avenue des Champs Elysees Bureau 326
- EU Representative Email: mjcm190928@gmail.com
- EU Representative Phone: 33-767213611
A user manual (PDF) is available for download: View User Manual (PDF)