1. Product Overview
The Heltec Sodium-ion Battery Management System (BMS) Protection Board is designed to safeguard your sodium-ion battery packs (nominal 3.0V per cell) from various electrical hazards. This manual covers models supporting 3 to 16 series (3-16S) battery configurations, providing essential protection functions such as overcharge, over-discharge, and overcurrent protection. It is suitable for a range of applications including electric bicycles, scooters, and motorcycles.
For detailed specifications and further information, please refer to the official user manual PDF: Heltec BMS User Manual (PDF).

Figure 1: Heltec Battery Manage System Overview
Video 1: Heltec BMS Product Overview
2. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, please contact your seller.
- Protective Plate (BMS Unit) x 1
- Power Cord (Balance Wires) x 1

Figure 2: Package Contents (Example for 14S 42V Na-ion BMS)
3. Specifications
General Specifications
| Feature | Description |
|---|---|
| Brand Name | Heltecbms |
| Type | LI-ION Battery BMS (for Sodium-ion) |
| Applicable Battery | 3.0V Na-ion cells |
| Balance Function | Passive Balanced BMS |
| Charge and Discharge Port | Common Port BMS (Same port) |
| Function | Overcharge Protection, Over Discharge Protection, Overcurrent Protection |
| Certification | CE |
| Usage Scenario | Power BMS, Energy Storage BMS |
Model-Specific Specifications
3-10S 15A 3V BMS (e.g., HTNA-310S03A20)
| Parameter | Value |
|---|---|
| Applicable Battery Strings | 3-10S |
| Discharge Continuous Current | 20A |
| Discharge Protection Current Limit | 30A |
| Charge Continuous Current | 15A |
| Charge Protection Current Limit | 20A |
| Overcharge Voltage (Single Path) | 3.95V ± 0.025V |
| Overcharge Release Voltage (Single Path) | 3.8V ± 0.05V |
| Overdischarge Voltage (Single Path) | 1.5V ± 0.05V |
| Overdischarge Release Voltage (Single Path) | 1.8V ± 0.05V |
| Over-temperature Protection | N/A |
| Equilibrium Current | 56mA |
| Dimensions | 60 x 40 x 8.5mm |

Figure 3: Basic Parameters for 3-10S BMS
5-16S 10A 3V BMS (e.g., HTNA-516S14A15)
| Parameter | Value |
|---|---|
| Applicable Battery Strings | 5-16S |
| Discharge Continuous Current | 15A |
| Discharge Protection Current Limit | 40A |
| Charge Continuous Current | 10A |
| Charge Protection Current Limit | 20A |
| Overcharge Voltage (Single Path) | 3.95V ± 0.025V |
| Overcharge Release Voltage (Single Path) | 3.8V ± 0.05V |
| Overdischarge Voltage (Single Path) | 1.8V ± 0.03V |
| Overdischarge Release Voltage (Single Path) | 2.0V ± 0.1V |
| Over-temperature Protection | -10°C to 70°C |
| Equilibrium Current | N/A |
| Dimensions | 62 x 50 x 9mm |

Figure 4: Basic Parameters for 5-16S BMS

Figure 5: Product Dimensions for 5-16S BMS
4. Setup & Installation
Important Wiring Notes:
- Strictly follow the wiring diagram for your specific BMS model and battery string count.
- When welding, do not connect the ports until all balance wires are properly connected.
- Verify the battery series sequence carefully.
- Wire according to the provided drawing and double-check all connections before applying power.
- Before assembly, check that the voltage of each individual battery cell is within the rated voltage range (nominal 3.0V for sodium-ion). If the voltage exceeds 3.8V, the protection board may not be able to be awakened.
- String and connect all batteries before welding the protection board.
- The wiring starts from B- (negative terminal of the first cell), and then B1, B2... up to B+ (positive terminal of the last cell) are wired in sequence.
- After confirming that the wiring is correct, measure whether the voltage between the board's P+ and P- terminals is consistent with the battery pack's B+ and B- terminals. If not, use a suitable charger to power on the pack.
Wiring Diagrams for 3-10S 15A 3V BMS:

Figure 6: 3S Connection Diagram

Figure 7: 4S Connection Diagram

Figure 8: 5S Connection Diagram

Figure 9: 6S Connection Diagram

Figure 10: 7S Connection Diagram

Figure 11: 8S Connection Diagram

Figure 12: 9S Connection Diagram

Figure 13: 10S Connection Diagram
Wiring Diagrams for 5-16S 10A 3V BMS:

Figure 14: 5S Connection Diagram

Figure 15: 6S Connection Diagram

Figure 16: 7S Connection Diagram

Figure 17: 8S Connection Diagram

Figure 18: 9S Connection Diagram

Figure 19: 10S Connection Diagram

Figure 20: 11S Connection Diagram

Figure 21: 12S Connection Diagram

Figure 22: 13S Connection Diagram

Figure 23: 14S Connection Diagram

Figure 24: 15S Connection Diagram

Figure 25: 16S Connection Diagram
5. Operating Instructions
The Heltec BMS operates automatically once correctly installed and connected to the battery pack. It continuously monitors the battery cells and performs the following functions:
- Overcharge Protection: Prevents individual cells from being charged beyond their safe voltage limit, disconnecting the charging source if detected.
- Over-discharge Protection: Prevents individual cells from being discharged below their safe voltage limit, disconnecting the load if detected.
- Overcurrent Protection: Disconnects the load if the discharge current exceeds the specified limit, protecting the battery and BMS from damage.
- Temperature Protection (for 5-16S models): Monitors battery temperature and disconnects charging/discharging if temperatures fall outside the safe operating range (-10°C to 70°C).
- Passive Balancing: Helps to equalize the voltage across battery cells over time, improving pack longevity and performance.
No user intervention is required for these protective functions to operate.
6. Maintenance
- Keep Dry: Ensure the BMS and battery pack are kept in a dry environment to prevent short circuits and corrosion.
- Avoid Physical Damage: Protect the BMS from impacts, vibrations, and excessive pressure.
- Inspect Wiring: Periodically check all wiring connections for looseness, corrosion, or damage. Ensure balance wires are securely attached.
- Cleanliness: Keep the BMS free from dust and debris. Use a soft, dry cloth for cleaning.
- Temperature: Operate the battery pack and BMS within their specified temperature ranges.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| BMS not waking up / No output | Individual cell voltage too high/low; Incorrect wiring; BMS in protection mode. | Check individual cell voltages (must be within safe range, e.g., 1.5V-3.8V). Verify all wiring connections against the diagram. Connect a suitable charger to reset the BMS if it's in protection mode. |
| BMS frequently triggers protection (overcurrent/over-discharge) | Load current too high; Battery pack capacity insufficient; Faulty cells; Short circuit. | Reduce load current. Ensure battery pack can supply required current. Check individual cell health. Inspect for any short circuits in the system. |
| BMS frequently triggers protection (overcharge) | Charger voltage too high; Faulty cells; Imbalance in battery pack. | Verify charger voltage matches battery pack requirements. Check individual cell health. Allow BMS to balance cells over time or manually balance if severe. |
| BMS gets hot | High current flow; Poor heat dissipation; Internal fault. | Ensure operating currents are within BMS limits. Provide adequate ventilation. If overheating persists at normal loads, discontinue use and contact support. |
8. User Tips
- Accurate Wiring is Key: The most critical step for proper BMS function is precise wiring according to the diagrams. Double-check every connection.
- Cell Voltage Check: Always verify individual cell voltages before connecting the BMS to avoid issues with initial activation.
- Application Matching: Ensure the selected BMS (e.g., 3-10S vs. 5-16S, and current ratings) is appropriate for your battery pack size and intended application (e.g., low-power e-bike vs. medium-power e-motorcycle).
9. Warranty & Support
For any warranty claims, technical support, or inquiries regarding your Heltec BMS Protection Board, please contact your original seller or the manufacturer directly. Keep your purchase records handy for faster service.