Autel MK906S Pro2-TS

Contents

Autel MaxiCOM MK906S Pro2-TS User Manual

Advanced TPMS Programming & Diagnostic Tool

1. Introduction

The Autel MaxiCOM MK906S Pro2-TS (referred to as MK906S Pro2-TS) is an advanced smart wireless diagnostic device designed for specialized automotive diagnostic services. It features a powerful octa-core processor, an 8.0-inch TFT-LED capacitive touchscreen, and long-distance wireless communication. Running on a multitasking mobile operating system, the MK906S Pro2-TS offers comprehensive and efficient vehicle diagnostics and analysis with OE-level capabilities. It integrates a TPMS module (315/433 MHz; 2.4 GHz BLE) to provide complete TPMS solutions.

The MaxiCOM system consists of two main components:

  • MaxiCOM System Tablet: The central processor and monitor for the system.
  • Vehicle Communication Interface (VCI): The device for accessing vehicle data.

This manual details the construction, operation, and interaction of these components to deliver diagnostic solutions.

2. Safety Information

For your safety and the safety of others, and to prevent damage to the device and vehicles, it is crucial to read and understand all safety instructions and messages in this manual before operation or maintenance.

2.1 Safety Messages

Safety messages are provided to prevent personal injury and equipment damage. Signal words indicate the hazard level:

  • DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
  • WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

2.2 Safety Warnings

  • Always perform automotive testing in a safe environment.
  • Wear safety eye protection that meets ANSI standards.
  • Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
  • Operate the vehicle in a well-ventilated work area, as exhaust gases are poisonous.
  • Ensure the transmission is in PARK (automatic) or NEUTRAL (manual) and the parking brake is engaged.
  • Place blocks in front of drive wheels and never leave the vehicle unattended while testing.
  • Exercise caution around ignition coils, distributor caps, ignition wires, and spark plugs due to hazardous voltages when the engine is running.
  • Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
  • Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
  • Keep the test equipment dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth for cleaning.
  • Do not drive the vehicle and operate the test equipment simultaneously; distraction may cause an accident.
  • Refer to the vehicle's service manual and adhere to all diagnostic procedures and precautions.
  • Ensure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure to avoid damaging the equipment or generating false data.
  • Do not place the test equipment on the vehicle's distributor; strong electromagnetic interference can damage the equipment.
  • Avoid listening at high volumes with headphones for extended periods to prevent hearing loss.

3. Setup and Initial Use

3.1 Unboxing and Components

The MaxiCOM MK906S Pro2-TS comes in a durable carrying case. Upon opening, you will find the main unit (tablet), the MaxiVCI V200, and various accessories.

Video: Unboxing and overview of the Autel MaxiCOM MK906S Pro2-TS kit.

The package typically includes:

  • Autel MK906S Pro2-TS Tablet (Main Unit)
  • MaxiVCI V200 (Vehicle Communication Interface)
  • AC/DC Adapter (12 V)
  • Type C USB Cable
  • Cigarette Lighter Adapter
  • Light Fuse (60x30mm) x 2
  • USB to Ethernet Adapter
  • Strap
  • Quick Reference Guide
  • Packing List
  • Soft Cloth
  • Carrying Case
Autel MaxiCOM MK906S Pro2-TS package contents

Image: Contents of the Autel MaxiCOM MK906S Pro2-TS package.

3.2 Powering Up and Down

Ensure the tablet has sufficient battery or is connected to a power supply.

Powering Up:

  1. Press and hold the Power/Lock button on the top of the tablet.
  2. Swipe up to unlock the screen and enter the system.

Powering Down:

All vehicle communications must be terminated before shutting down the tablet. Forcing a shut-down during communication may lead to ECM problems.

  1. Press and hold the Power/Lock button.
  2. Tap Power Off.
  3. Tap OK. The tablet will turn off.

Reboot System:

In case of a system crash:

  1. Press and hold the Power/Lock button.
  2. Tap Restart.
  3. Tap OK. The tablet will turn off and restart.

3.3 VCI and Vehicle Connection

Proper connection of the VCI to the vehicle and tablet is essential for diagnostics.

VCI - Vehicle Communication Interface (MaxiVCI V200)

The MaxiVCI V200 connects to the vehicle's Data Link Connector (DLC) and communicates wirelessly with the tablet.

Autel MaxiCOM MK906S Pro2-TS main unit and VCI

Image: Autel MaxiCOM MK906S Pro2-TS main unit and MaxiVCI V200.

Power LED Description (MaxiVCI V200):
ColorDescription
YellowVCI is powered on and performing self-check.
GreenVCI is ready for use.
Flashing RedFirmware is updating.
Connection LED Description (MaxiVCI V200):
ColorDescription
Solid GreenVCI connected via USB cable.
Flashing GreenVCI communicating via USB cable.
Solid BlueVCI connected via Bluetooth.
Flashing BlueVCI communicating via Bluetooth.

Vehicle Connection:

The VCI connects to the vehicle's DLC (Data Link Connector), usually located under the dashboard.

  • OBDII Vehicle Connection: Insert the MaxiVCI V200's Vehicle Data Connector (16-pin) directly into the vehicle's DLC.
  • Non-OBDII Vehicle Connection: For older vehicles, locate the required OBDI adapter, connect its 16-pin jack to the MaxiVCI V200, and then connect the adapter to the vehicle's DLC.

VCI Connection to Tablet:

  • Bluetooth Pairing: Recommended for wireless communication up to 164 feet (50m). Go to VCI Manager application, select VCI BT, turn Bluetooth ON, and select the VCI for pairing.
  • USB Cable Connection: Connect the USB cable from the tablet to the MaxiVCI V200. The VCI navigation button on the tablet's bottom bar will show a green badge, and the Connection LED on the VCI will illuminate solid green.

4. Operating the MaxiCOM MK906S Pro2-TS

The MaxiCOM MK906S Pro2-TS offers a wide range of diagnostic and service functions through its intuitive interface.

4.1 Vehicle Identification

The system supports five methods for identifying a vehicle:

  • Auto VIN Scan: Automatically identifies the vehicle's VIN and scans all diagnosable ECUs.
  • Manual VIN Input: Allows manual entry of the VIN for vehicles not supporting Auto VIN Scan.
  • Scan VIN/License: Uses the tablet's camera to scan VIN or license plate numbers.
  • Manual Vehicle Selection: Step-by-step menu-driven selection of vehicle make, model, and year.
  • OBD Direct Entry: For generic OBDII/EOBD tests when the vehicle is not recognized by the database.

4.2 Diagnostics

The Diagnostics application retrieves diagnostic information, views live data, and performs active tests by establishing a data link to the vehicle's electronic control systems.

Auto Scan:

Performs a comprehensive scan of all available systems on the vehicle's ECU to locate fault systems and retrieve Diagnostic Trouble Codes (DTCs).

Control Unit:

Allows manual selection of a specific control unit for testing through a menu-driven procedure.

Function Menu Options:

  • ECU Information: Displays detailed ECU information.
  • Trouble Codes: Reads and erases DTCs.
  • Live Data: Retrieves and displays real-time data parameters from the vehicle's ECU.
  • Active Test: Performs specific subsystem and component tests by outputting commands to the ECU.
  • Special Functions: Performs component adaptations, recalibrations, or configurations.

4.3 TPMS Operations

The TPMS application is used to check sensor conditions, program MX-Sensors, perform TPMS Relearn procedures, and conduct basic TPMS diagnostic functions.

TPMS expert features including 2 programming ways, 4 relearn ways, 99% car coverage, and one-click sensor reading.

Image: TPMS expert features including programming, relearn, and sensor reading.

Check Operations:

Activates TPMS sensors to view sensor data (ID, tire pressure, temperature, battery status, position, frequency) and sends data to the vehicle's ECU for learning sensor positions.

Programming Operations:

Programs sensor data to MX-Sensors to replace faulty sensors. Options include: Copy by Activation, Copy by OBD, Copy by Input, and Auto Create.

Relearn Operations:

Allows quick access to the vehicle's ECU for TPMS diagnostics, reading IDs, writing IDs, and clearing codes. Methods include OBD Relearn, Automatic Relearn, and Stationary Relearn.

Retrofit Operations:

Required if the vehicle is not factory-equipped with a TPMS system. Allows backing up, restoring, and programming the Autel ECU for TPMS.

4.4 Service Functions

The Service section provides quick access to scheduled service and maintenance tasks.

36+ hot reset services

Image: Overview of 36+ hot reset services available.

Commonly performed services include:

  • Oil Reset Service: Resets the Engine Oil Life system after an oil change.
  • Electric Parking Brake (EPB) Service: Maintains the electronic braking system, including deactivating/activating the control system, assisting with brake fluid control, and setting brakes.
  • ABS/SRS Services: Performs bi-directional tests for Anti-lock Braking System and Supplemental Restraint System.
  • Steering Angle Sensor (SAS) Service: Calibrates the Steering Angle Sensor.
  • DPF Regeneration Service: Performs Diesel Particulate Filter regeneration.

4.5 Battery Test (with MaxiBAS BT506, sold separately)

The MaxiBAS BT506 (sold separately) is a battery and electrical system analysis tool that uses Adaptive Conductance to assess battery health. The MK906S Pro2-TS application can complete battery, starting, and charging system tests.

Battery test with Autel BT506 (BT506 not included)

Image: Battery test functionality with the optional Autel BT506.

In-vehicle Test:

Tests batteries installed in a vehicle, including battery, starter, and generator tests.

Out-vehicle Test:

Tests the condition of batteries not connected to a vehicle.

Connecting to a Battery (with BT506):

  1. Press and hold the Power button on the MaxiBAS BT506 tester.
  2. Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal of the battery. The black clamp has an infrared sensor for battery temperature.

4.6 Advanced Functions

  • ECU Coding: Enhances vehicle performance by activating car potential and customizing settings. Supports ECU replacement, refreshing hidden functions, simulating higher-level features, component matching, and offline adaptation for various brands like BMW, Porsche, Bentley, Bugatti, Audi, VW, Renault, Ford, etc.
  • VAG Guided Functions: Provides on-screen step-by-step guidance for complex procedures on VAG vehicles, simplifying calibration, coding new components, resetting fault codes, and performing advanced diagnostic tests.
  • Auto Scan 2.0: Offers 10X faster scanning of all systems in seconds, with options for Auto VIN, Scan VIN/License, Manual Input, and Quick Diagnostics.
  • Pre & Post Scan Reports: Generates reports to document vehicle condition before and after repairs, aiding in efficient repair planning and transparent communication with customers.
  • Autel Cloud Management: Infinitely stores diagnostic data with no memory limit and allows timely sharing of reports via SMS/QR codes/emails.
  • VIN & Meter Check: Quickly retrieves VIN data and info to avoid issues with used cars, major ECU repairs, or mismatched parts. Reads mileage values, VIN values, and car fuel efficiency.
  • DOIP & CAN FD Protocols: Supports new-age car protocols, offering 14X faster transmission speed for CAN FD and 100-200X faster diagnostics for DoIP on compatible vehicles (e.g., GM, Chrysler, Volvo, Land Rover, Jaguar, BMW).
  • Endoscope Support: Compatible with MV108S/MV105S endoscopes (sold separately) for visual inspection of hard-to-reach areas, capturing HD still images and dynamic video.

5. Data Management

The Data Manager application allows you to store, print, and review saved files, manage workshop and customer information, and keep vehicle history records.

  • Vehicle History: Stores records of vehicle history, including VIN and retrieved DTCs from previous diagnostic sessions.
  • Workshop Information: Enter, edit, and save detailed workshop information for reports.
  • Customer: Create and edit customer accounts, correlating them with vehicle history records.
  • Image: PNG database of all captured screenshots.
  • Report: Stores diagnostic reports, viewable locally or shareable to Autel cloud.
  • PDF: Stores and displays all PDF files of saved data.
  • Review Data: Plays back recorded data frames of live data streams.
  • Uninstall Apps: Manage installed software applications.
  • Data Logging: Launch Support platform to view feedback records and submitted data loggings.

6. Maintenance

To ensure optimal performance and longevity of your MaxiCOM MK906S Pro2-TS, follow these maintenance guidelines:

  • Cleaning: Use a soft cloth with alcohol or a mild window cleaner to clean the touchscreen. Do not use abrasive cleansers, detergents, or automotive chemicals.
  • Environment: Keep devices dry and within normal operating temperatures. Avoid humid, dusty, or dirty areas.
  • Handling: Dry your hands before using the tablet. Check housing, wiring, and connectors for dirt and damage before and after each use. Wipe clean with a damp cloth daily.
  • Disassembly: Do not attempt to disassemble the tablet or VCI.
  • Impact: Avoid dropping or causing severe impact to the devices.
  • Accessories: Use only authorized battery chargers and accessories. Unauthorized accessories may void the warranty.
  • Battery Charger: Ensure the battery charger does not contact conductive objects.
  • Interference: Do not use the tablet near microwave ovens, cordless phones, or certain medical/scientific instruments to prevent signal interference.

6.1 Battery Usage

The tablet is powered by a built-in Lithium-ion Polymer battery. This battery can be recharged even if some charge remains, without the 'battery memory effect'.

DANGER: The built-in Lithium-ion Polymer battery is factory replaceable only. Incorrect replacement or tampering with the battery pack may cause an explosion.

  • Do not use a damaged battery charger.
  • Do not disassemble, open, crush, bend, deform, puncture, or shred the battery.
  • Do not modify or remanufacture the battery, attempt to insert foreign objects, or expose it to fire, explosion, or other hazards.
  • Use only the charger and USB cables provided in the package.
  • Only use the charging device qualified with the device per the standard.
  • Avoid dropping the tablet. If dropped, especially on a hard surface, take it to a service center for inspection.
  • Remove the tablet from its charger once fully charged to prevent overcharging, which can shorten battery life.
  • Keep the tablet within normal temperatures; extreme hot or cold conditions can reduce battery capacity and life.

7. Troubleshooting Checklist

If you encounter issues with your MaxiCOM MK906S Pro2-TS, refer to the following checklist:

  • Tablet not working properly:
    • Ensure the tablet is registered online.
    • Verify system software and diagnostic application software are updated.
    • Confirm the tablet is connected to the Internet.
    • Check all cables, connections, and indicators for signal reception.
  • Battery life shorter than usual:
    • This may occur in areas with low signal strength. Turn off the device when not in use.
  • Unable to turn on the tablet:
    • Ensure the tablet is connected to a power source or the battery is charged.
  • Unable to charge the tablet:
    • Check if the charger is faulty.
    • Ensure the charging environment is not overly hot/cold.
    • Verify the charger is properly connected.
  • No Communication Message (VCI):
    • Check if the VCI is powered up.
    • For wireless connections, ensure the network is configured correctly and the right VCI is paired.
    • If communication is interrupted, check for objects causing signal interference.
    • Verify the VCI is properly positioned.
    • Try standing closer to the VCI for more stable signals.
    • For wired connections, check the cable connection between the tablet and VCI.
    • Check if the Connection LED on the VCI is illuminated (Bluetooth or USB).
    • If the Power LED on the VCI is flashing red, there may be a hardware problem; contact technical support.

If problems persist, contact Autel's technical support personnel.

8. Technical Specifications

8.1 MaxiCOM System Tablet

ItemDescription
Operating SystemAndroid 10
ProcessorOcta-core processor (2.2 GHz + 1.8 GHz)
Memory4 GB RAM & 128 GB on-board memory
Display8.0-inch TFT-LED capacitive touch screen with 1920 x 1200 P resolution
ConnectivityWi-Fi (802.11 b/g/n), USB 2.0, USB Type-C, Bluetooth V2.1+EDR Class 1, HDMI, SD Card (supports up to 32 GB)
CameraRear: 16 megapixel, autofocus with flashlight; Front: 16 megapixel
SensorsGravity Accelerometer, Ambient Light Sensor (ALS)
Audio Input/OutputInput: microphone; Output: single speakers, 3-band 3.5 mm stereo/standard headset jack
Power and Battery11,600 mAh 3.7 V lithium-polymer battery; Charging via 12 V AC/DC power supply; Charging via USB Type-C power supply
Input VoltageDC input: 12 V/3A; USB-C input: 5V/3A
Power Consumption5 W
Operating Temp.0 to 50° C (32 to 122° F)
Storage Temp.-10 to 60° C (14 to 140° F)
HousingStrong plastic housing with protective rubber boot
Dimensions (W x H x D)260 mm (10.0") x 170 mm (6.9") x 30 mm (1.4")
WeightNW: 0.962 kg (2.12 lb.)
Supported Automotive ProtocolsISO 9142-2, ISO 14230-2, ISO 15765-4, K-Line, L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, High speed, Middle speed, Low speed and Single wire CAN, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP 2.0, TP 1.6, SAE J1939, SAE J1708, Fault-Tolerant CAN, ISO 13400, CAN FD

8.2 MaxiVCI V200

ItemDescription
CommunicationsBLE + EDR, Type-C USB
Wireless Frequency2.4 GHz
Input Voltage Range8 V to 30 V DC
Supply Current150 mA @ 12 V DC
Operating Temp.0 to 50° C (32 to 122° F)
Storage Temp.-10 to 60° C (14 to 140° F)
Dimensions (L x W x H)89.89 mm (3.53") x 46.78 mm (1.84") x 21 mm (0.82")
Weight70.7 g (0.156 lb.)
Built-in Battery3.7 V lithium battery (for LED lighting only)
LightWhite LED

9. User Tips

  • Internet Connection for Updates: Always ensure the tablet is connected to a stable internet source for software updates and vehicle identification.
  • VCI Placement: If experiencing communication issues, reposition the VCI and remove any potential signal obstructions.
  • Battery Management: For optimal battery life, avoid overcharging and extreme temperatures.
  • TPMS Programming: When programming MX-Sensors, ensure the sensor is placed near the top-right of the tablet for successful data transfer.
  • Data Logging: Utilize the data logging feature to record diagnostic sessions, which can be helpful for technical support and future reference.

10. Support and Warranty

10.1 Technical Support

For any questions or problems regarding product operations, please contact Autel support:

  • North America: 1-855-288-3587 (Monday-Friday, 9AM-6PM Eastern Time)
  • China: +86 (0755) 8614-7779 (Monday-Friday, 9AM-6PM Beijing Time)
  • Email: support@autel.com
  • Website: www.autel.com

For technical assistance in other markets, refer to the contact information provided in the full user manual PDF.

10.2 Warranty Information

Autel Intelligent Technology Corp., Ltd. (the Company) warrants this MaxiCOM Diagnostics Device to be free from defects in material and workmanship under normal consumer usage for twelve (12) months from the date of delivery. Defects will be repaired or replaced with new or rebuilt parts, at the Company's option, without charge for parts or labor directly related to the defect(s), upon presentation of Proof of Purchase.

This warranty does not cover:

  • Products subjected to abnormal use, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation or repair, or improper storage.
  • Products with removed, altered, or defaced mechanical or electronic serial numbers.
  • Damage from exposure to excessive temperatures or extreme environmental conditions.
  • Damage from connection to, or use of, unauthorized accessories or products.
  • Defects in appearance, cosmetic, decorative, or structural items.
  • Damage from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft, or improper usage of any electrical source.

It is recommended to create a back-up copy of any contents of your product before delivering it for warranty service, as all contents may be deleted during repair.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.